Subject: port-amd64/36519: No ld0 under 4.0BETA2/amd64 with 3ware 9500.
To: None <port-amd64-maintainer@netbsd.org, gnats-admin@netbsd.org,>
From: None <liman@autonomica.se>
List: netbsd-bugs
Date: 06/20/2007 12:35:00
>Number:         36519
>Category:       port-amd64
>Synopsis:       4.0BETA2/amd64 does not find logical drives under 3ware 9500.
>Confidential:   no
>Severity:       critical
>Priority:       high
>Responsible:    port-amd64-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jun 20 12:35:00 +0000 2007
>Originator:     Lars-Johan Liman
>Release:        NetBSD 4.0BETA2 200706110002Z
>Organization:
#----------------------------------------------------------------------
# Lars-Johan Liman, M.Sc.	! E-mail: liman@autonomica.se
# Senior Systems Specialist     ! HTTP  : //www.autonomica.se/
# Autonomica AB, Stockholm 	! Voice : +46 8 - 615 85 72
#----------------------------------------------------------------------
>Environment:
NetBSD 4.0_BETA2 (INSTALL) #0: Mon Jun 11 01:53:46 PDT 2007
        builds@wb28:/home/builds/ab/netbsd-4/amd64/200706110002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/amd64/compile/INSTALL
Architecture: amd64
Machine: amd64
>Description:
	The kernel above does not discover the logical drive(s)
	presented by the 3ware 9500S-4LP RAID controller. The same
	machine booted from an i386/INSTALL kernel of the exact same
	version and date discovers the ld drive(s) without any
	problems.

	The machine is an OEM box, with an Intel(?) motherboard and
	2 x Xeon 5130 processors. It's fitted with a 3ware 9500S-4LP
	RAID controller and 4 physical drives. Physical drives 0 and 1
	constitute a RAID-1 system.

	Here are the /dev/klog from booting amd64 and i386 respectively.

#----------------------------------------------------------------------
# /dev/klog  from amd64
#----------------------------------------------------------------------

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_BETA2 (INSTALL) #0: Mon Jun 11 01:53:46 PDT 2007
	builds@wb28:/home/builds/ab/netbsd-4/amd64/200706110002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/amd64/compile/INSTALL
total memory = 4094 MB
avail memory = 3940 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU            5140  @ 2.33GHz, 2333.56 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,B20,DS,ACPI,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2: 4e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: features3: bffbfbff<SYSCALL/SYSRET,XD,EM64T>
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: calibrating local timer
cpu0: apic clock running at 333 MHz
cpu0: 64 page colors
cpu1 at mainbus0: apid 6 (application processor)
cpu1: not started
cpu2 at mainbus0: apid 1 (application processor)
cpu2: not started
cpu3 at mainbus0: apid 7 (application processor)
cpu3: not started
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 3 (I/O APIC)
ioapic1: pa 0xfec80000, version 20, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 24-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
INT0800 at acpi0 not configured
PNP0A05 at acpi0 not configured
PNP0303 at acpi0 not configured
PNP0F13 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0C0C at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci4 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1
wm0: interrupting at ioapic0 pin 18 (irq 11)
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:33:0e:c2
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci4 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1
wm1: interrupting at ioapic0 pin 19 (irq 10)
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:33:0e:c3
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
3ware 9000 series: (rev. 0x00)
twa0 at pci5 dev 1 function 0: 3ware Apache
twa0: interrupting at ioapic1 pin 0 (irq 7)
64 bit addressing supported for scatter/gather list
twa0: 4 ports, Firmware FE9X 2.08.00.006, BIOS BE9X 2.03.01.052
twa0: Monitor BL9X 2.02.00.001, PCB Rev 019 , Achip 3.20    , Pchip 1.50    
twa0: port 0: ST3250620NS                              238475 MB
twa0: port 1: ST3250620NS                              238475 MB
twa0: port 2: ST3250620NS                              238475 MB
twa0: port 3: ST3250620NS                              238475 MB
ppb5 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1)
ppb7 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x9005 product 0x041f (RAID mass storage, revision 0x09) at pci9 dev 2 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at ioapic0 pin 17 (irq 5)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at ioapic0 pin 19 (irq 10)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09)
uhci3: interrupting at ioapic0 pin 16 (irq 7)
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x268c (USB serial bus, interface 0x20, revision 0x09) at pci0 dev 29 function 7 not configured
ppb9 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
vga0 at pci10 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x269b (SMBus serial bus, revision 0x09) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
ioapic0: enabling
ioapic1: enabling
timecounter: Timecounter "TSC" frequency 2333502080 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8178, , PZ16> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
uhid at uhidev0 not configured
uhidev1 at uhub3 port 1 configuration 1 interface 1
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

#----------------------------------------------------------------------
# /dev/klog  from i386
#----------------------------------------------------------------------

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.0_BETA2 (INSTALL) #0: Mon Jun 11 03:51:08 PDT 2007
	builds@wb46:/home/builds/ab/netbsd-4/i386/200706110002Z-obj/home/builds/ab/netbsd-4/src/sys/arch/i386/compile/INSTALL
total memory = 3326 MB
avail memory = 3258 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd500
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Core 2 (Merom) (686-class), 2333.54 MHz, id 0x6f6
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4e3bd<SSE3,MONITOR,DS-CPL,VMX,EST,TM2,xTPR>
cpu0: "Intel(R) Xeon(R) CPU            5140  @ 2.33GHz"
cpu0: I-cache 32 KB 64B/line 8-way, D-cache 32 KB 64B/line 8-way
cpu0: L2 cache 4 MB 64B/line 16-way
cpu0: using thermal monitor 1
cpu0: 64 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x25d8 (rev. 0xb1)
ppb0 at pci0 dev 2 function 0: vendor 0x8086 product 0x25f7 (rev. 0xb1)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci1 dev 0 function 0: vendor 0x8086 product 0x3500 (rev. 0x01)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: vendor 0x8086 product 0x3510 (rev. 0x01)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
ppb3 at pci2 dev 2 function 0: vendor 0x8086 product 0x3518 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci4 dev 0 function 0: i80003 dual 1000baseT Ethernet, rev. 1
wm0: interrupting at irq 11
wm0: PCI-Express bus
wm0: 65536 word (16 address bits) SPI EEPROM
wm0: Ethernet address 00:30:48:33:0e:c2
ikphy0 at wm0 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci4 dev 0 function 1: i80003 dual 1000baseT Ethernet, rev. 1
wm1: interrupting at irq 10
wm1: PCI-Express bus
wm1: 65536 word (16 address bits) SPI EEPROM
wm1: Ethernet address 00:30:48:33:0e:c3
ikphy1 at wm1 phy 1: i82563 10/100/1000 media interface, rev. 2
ikphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb4 at pci1 dev 0 function 3: vendor 0x8086 product 0x350c (rev. 0x01)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
3ware 9000 series: (rev. 0x00)
twa0 at pci5 dev 1 function 0: 3ware Apache
twa0: interrupting at irq 7
twa0: 4 ports, Firmware FE9X 2.08.00.006, BIOS BE9X 2.03.01.052
twa0: Monitor BL9X 2.02.00.001, PCB Rev 019 , Achip 3.20    , Pchip 1.50    
twa0: port 0: ST3250620NS                              238475 MB
twa0: port 1: ST3250620NS                              238475 MB
twa0: port 2: ST3250620NS                              238475 MB
twa0: port 3: ST3250620NS                              238475 MB
twa0: AMCC    9500S-4LP  DISK 2.085QE2X3B06949C60013A3
ld0 at twa0 unit 0
ld0: 232 GB, 30392 cyl, 255 head, 63 sec, 512 bytes/sect x 488259584 sectors
ppb5 at pci0 dev 4 function 0: vendor 0x8086 product 0x25f8 (rev. 0xb1)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
ppb6 at pci0 dev 6 function 0: vendor 0x8086 product 0x25f9 (rev. 0xb1)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x8086 product 0x1a38 (miscellaneous system, revision 0xb1) at pci0 dev 8 function 0 not configured
pchb1 at pci0 dev 16 function 0
pchb1: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb2 at pci0 dev 16 function 1
pchb2: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb3 at pci0 dev 16 function 2
pchb3: vendor 0x8086 product 0x25f0 (rev. 0xb1)
pchb4 at pci0 dev 17 function 0
pchb4: vendor 0x8086 product 0x25f1 (rev. 0xb1)
pchb5 at pci0 dev 19 function 0
pchb5: vendor 0x8086 product 0x25f3 (rev. 0xb1)
pchb6 at pci0 dev 21 function 0
pchb6: vendor 0x8086 product 0x25f5 (rev. 0xb1)
pchb7 at pci0 dev 22 function 0
pchb7: vendor 0x8086 product 0x25f6 (rev. 0xb1)
ppb7 at pci0 dev 28 function 0: vendor 0x8086 product 0x2690 (rev. 0x09)
pci8 at ppb7 bus 8
pci8: i/o space, memory space enabled, rd/line, wr/inv ok
ppb8 at pci8 dev 0 function 0: vendor 0x8086 product 0x032c (rev. 0x09)
pci9 at ppb8 bus 9
pci9: i/o space, memory space enabled, rd/line, wr/inv ok
vendor 0x9005 product 0x041f (RAID mass storage, revision 0x09) at pci9 dev 2 function 0 not configured
uhci0 at pci0 dev 29 function 0: vendor 0x8086 product 0x2688 (rev. 0x09)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: vendor 0x8086 product 0x2689 (rev. 0x09)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: vendor 0x8086 product 0x268a (rev. 0x09)
uhci2: interrupting at irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3: vendor 0x8086 product 0x268b (rev. 0x09)
uhci3: interrupting at irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: vendor 0x8086 product 0x268c (rev. 0x09)
ehci0: interrupting at irq 5
ehci0: BIOS refuses to give up ownership, using force
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: vendor 0x8086 EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb9 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0xd9)
pci10 at ppb9 bus 10
pci10: i/o space, memory space enabled
vga1 at pci10 dev 1 function 0: vendor 0x1002 product 0x515e (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2670 (rev. 0x09)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 631xESB/632xESB IDE Controller (rev. 0x09)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel ignored (disabled)
vendor 0x8086 product 0x269b (SMBus serial bus, revision 0x09) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "TSC" frequency 2333525880 Hz quality 800
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
md0: internal 5000 KB image area
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <MATSHITADVD-ROM SR-8178, , PZ16> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
uhidev0 at uhub4 port 7 configuration 1 interface 0
uhidev0: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/0
uhid at uhidev0 not configured
uhidev1 at uhub4 port 7 configuration 1 interface 1
uhidev1: Peppercon AG Multidevice, rev 2.00/0.01, addr 2, iclass 3/1
ukbd0 at uhidev1
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
boot device: <unknown>
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

#----------------------------------------------------------------------
# END.
#----------------------------------------------------------------------


>How-To-Repeat:
	Boot from amd64 INSTALL cdrom.
>Fix:
	None known.