The following reply was made to PR kern/35711; it has been noted by GNATS.

From: Manuel Bouyer <bouyer@antioche.eu.org>
To: gnats-bugs@NetBSD.org
Cc: kern-bug-people@NetBSD.org, gnats-admin@NetBSD.org,
	netbsd-bugs@NetBSD.org
Subject: Re: kern/35711: NetBSD-current msk/amd64 random failures
Date: Mon, 19 Feb 2007 22:34:57 +0100

 On Mon, Feb 19, 2007 at 03:50:01PM +0000, tru@pasteur.fr wrote:
 > >Number:         35711
 > >Category:       kern
 > >Synopsis:       NetBSD-current msk/amd64 random failures
 > >Confidential:   no
 > >Severity:       serious
 > >Priority:       medium
 > >Responsible:    kern-bug-people
 > >State:          open
 > >Class:          sw-bug
 > >Submitter-Id:   net
 > >Arrival-Date:   Mon Feb 19 15:50:01 +0000 2007
 > >Originator:     tru
 > >Release:        4.99.11 Mon Feb 19 00:45:31 CET 2007
 > >Organization:
 > >Environment:
 > GENERIC+SMP+ACPI+WPI enabled
 > 
 > arch: amd64
 > 
 > hardware: Sony laptop SZ3XP (core duo2)
 > 
 > 
 > >Description:
 > msk0 initialisation failure?
 > 
 > dmesg:
 > mskc0 at pci3 dev 0 function 0mskc0: interrupt moderation is 0 us
 > , Yukon-2 FE rev. A1 (0x1): ioapic0 pin 18 (irq 10)
 > msk0 at mskc0 port A: Ethernet address 00:13:a9:8c:78:69
 > mvphy0 at msk0 phy 0: Marvell 88E6060 10/100 5-port PHY switch, rev. 3
 > mvphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 > ukphy0 at msk0 phy 3: Generic IEEE 802.3u media interface
 > ukphy0: OUI 0x000800, model 0x0004, rev. 0
 > ukphy0: no media present
 > ukphy1 at msk0 phy 6: Generic IEEE 802.3u media interface
 > ukphy1: OUI 0x002200, model 0x0011, rev. 0
 > ukphy1: no media present
 > 
 > ifconfig -m msk0:
 > msk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 >   address: 00:13:a9:8c:78:69
 >   media: Ethernet autoselect (none)
 >   status: no carrier
 >   supported Ethernet media:
 >     media none
 >     media 10baseT
 >     media 10baseT mediaopt full-duplex
 >     media 100baseTX
 >     media 100baseTX mediaopt full-duplex
 >     media autoselect
 >   inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
 >   inet6 fe80::213:a9ff:fe8c:7869%msk0 prefixlen 64 scopeid 0x2
 
 Strange, it's seeing 3 PHYs while only one seems to be really present.
 The 2 others PHYs seems to return nonsence.
 What happens if you tell explicitely to use phy 0:
 ifconfig msk0 media autoselect instance 0
 
 -- 
 Manuel Bouyer <bouyer@antioche.eu.org>
      NetBSD: 26 ans d'experience feront toujours la difference
 --