The following reply was made to PR kern/25462; it has been noted by GNATS.

From: Kvedulv / Michael Moll <kvedulv@kvedulv.de>
To: gnats-bugs@NetBSD.org
Cc: 
Subject: Re: kern/25462
Date: Fri, 1 Sep 2006 21:30:05 +0200

 It also doesn't work with 1.6.2:
 
 
 Netra T1 200 (UltraSPARC-IIe 500MHz), No Keyboard
 OpenBoot 4.0, 512 MB memory installed, Serial #51364831.
 Ethernet address 0:3:ba:f:c3:df, Host ID: 830fc3df.
 
 ok boot net netbsd
 Boot device: /pci@1f,0/pci@1,1/network@c,1  File and args: netbsd
 >> NetBSD/sparc64 OpenFirmware Boot, Revision 1.9
 >> (builds@b4.netbsd.org, Thu Aug 24 08:40:33 UTC 2006)
 net_open: client addr: 192.168.200.4
 net_open: subnet mask: 255.255.255.0
 net_open: net gateway: 192.168.200.8
 net_open: server addr: 192.168.200.11
 net_open: server path: /tmp/sparc
 Using BOOTP protocol: ip address: 192.168.200.4, hostname: ray, netmask: 255.255.255.0, gateway: 192.168.200.8
 root addr=192.168.200.11 path=/tmp/sparc
 =0xd26b08
 [c] Loading netbsd: 4566488+5401288+539680=0xdaa968
 [ netbsd ELF symbol table not valid ]
 [ no symbol table formats found ]
 Kernel size exceeds 4MB
 consinit()
 setting up stdin
 chosen = f002d93c, stdin @ 0x181ab48
 stdin instance = fffb79e0
 stdin node = f007df60
 setting up stdout
 stdout instance = fffb7718
 stdout package = f007df60
 buffer @ 0x2009d90
 console is /pci@1f,0/pci@1,1/isa@7/serial@0,3f8
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 1.6.2 (INSTALL) #3: Mon Feb  9 18:38:42 CET 2004
     he@kveite.urc.uninett.no:/usr/users/he/build-1-6/obj.sparc64/sys/arch/sparc64/compile/INSTALL
 total memory = 512 MB
 avail memory = 457 MB
 using 3289 buffers containing 26312 KB of memory
 bootpath: /pci@1f,0/pci@1,1/network@c,1
 mainbus0 (root): SUNW,UltraAX-i2
 cpu0 at mainbus0: SUNW,UltraSPARC-IIe @ 500 MHz, version 0 FPU
 cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 1024K external (64 b/l)
 psycho0 at mainbus0
 SUNW,sabre: impl 0, version 0: ign 7c0 bus range 0 to 2; PCI bus 0
 intr_establish: intr reused 7c0
 DVMA map: c0000000 to e0000000
 IOTSB: 2544000 to 25c4000
 pci0 at psycho0
 pci0: i/o space, memory space enabled
 ppb0 at pci0 dev 1 function 1: Sun Microsystems Simba PCI bridge (rev. 0x13)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 ebus0 at pci1 dev 12 function 0
 ebus0: Sun Microsystems PCIO Ebus2 (US III), revision 0x01
 flashprom at ebus0 addr 0-fffff not configured
 clock0 at ebus0 addr 0-1fff: mk48t59: hostid 0
 ebus_attach: idprom: incomplete
 SUNW,lomh at ebus0 addr 200000-200003 ipl 42 not configured
 Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci1 dev 3 function 0 not configured
 ebus1 at pci1 dev 7 function 0
 ebus1: Acer Labs M1543 PCI-ISA Bridge, revision 0x00
 power at ebus1 addr 800-82f ipl 37 not configured
 com0 at ebus1 addr 3f8-3ff ipl 43: ns16550a, working fifo
 com0: console
 com1 at ebus1 addr 2e8-2ef ipl 43intr_establish: intr reused 7eb
 : ns16550a, working fifo
 gem0 at pci1 dev 12 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
 gem0: interrupting at ivec 3006
 gem0: Ethernet address 00:03:ba:0f:c3:df, 2KB RX fifo, 2KB TX fifo
 ukphy0 at gem0 phy 1: Generic IEEE 802.3u media interface
 ukphy0: OUI 0x0008bb, model 0x0002, rev. 1
 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 using internal phy
 ohci0 at pci1 dev 12 function 3: Sun Microsystems USB controller (rev. 0x01)
 ohci0: interrupting at ivec 24
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 pciide0 at pci1 dev 13 function 0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc3)
 pciide0: bus-master DMA support present
 pciide0: primary channel configured to native-PCI mode
 pciide0: using ivec 180c for native-PCI interrupt
 pciide0: disabling primary channel (no drives)
 pciide0: secondary channel configured to native-PCI mode
 pciide0: disabling secondary channel (no drives)
 gem1 at pci1 dev 5 function 1: Sun Microsystems ERI Ethernet (rev. 0x01)
 gem1: interrupting at ivec 301c
 gem1: Ethernet address 00:03:ba:0f:c3:df, 2KB RX fifo, 2KB TX fifo
 ukphy1 at gem1 phy 1: Generic IEEE 802.3u media interface
 ukphy1: OUI 0x0008bb, model 0x0002, rev. 1
 ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 using internal phy
 ohci1 at pci1 dev 5 function 3: Sun Microsystems USB controller (rev. 0x01)
 ohci1: interrupting at ivec 26
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Sun Microsystem OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 4 ports with 4 removable, self powered
 ppb1 at pci0 dev 1 function 0: Sun Microsystems Simba PCI bridge (rev. 0x13)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 siop0 at pci2 dev 8 function 0: Symbios Logic 53c896 (ultra2-wide scsi)
 siop0: using on-board RAM
 siop0: interrupting at ivec 20
 scsibus0 at siop0: 16 targets, 8 luns per target
 siop1 at pci2 dev 8 function 1: Symbios Logic 53c896 (ultra2-wide scsi)
 siop1: using on-board RAM
 intr_establish: intr reused 7e0
 siop1: interrupting at ivec 20
 scsibus1 at siop1: 16 targets, 8 luns per target
 pcons at mainbus0 not configured
 No counter-timer -- using %tick at 500MHz as system clock.
 Using %tick -- intr in 5000000 cycles...done.
 scsibus0: waiting 2 seconds for devices to settle...
 siop0: alloc newcdb at PHY addr 0xc0016000
 probe(siop0:0:0:0): command timeout
 
 regards
 -- 
 Kvedulv / Michael Moll
 e-mail : kvedulv@kvedulv.de
   WWW  : http://www.kvedulv.de/
   GSM  : +49 175 606 7861