The following reply was made to PR port-i386/34025; it has been noted by GNATS.

From: Ed Gould <ed@left.wing.org>
To: Frank van der Linden <fvdl@netbsd.org>
Cc: gnats-bugs@netbsd.org, port-i386-maintainer@netbsd.org,
	gnats-admin@netbsd.org, netbsd-bugs@netbsd.org
Subject: Re: port-i386/34025: ACPI Interrupt Failure with 3.99.22 (and 3.99.21) 
Date: Wed, 16 Aug 2006 08:35:04 -0700

 This is a multipart MIME message.
 
 --==_Exmh_17251853580
 Content-Type: text/plain; charset=us-ascii
 
 > Ok, cool. Do you agree that this PR can be closed? And, for completeness,
 > can you send a dmesg of the working system?
 
 Yes, I agree that this PR can be closed.  The dmesg is attached.
 
 	--Ed
 
 
 
 --==_Exmh_17251853580
 Content-Type: text/plain ; name="dmesg-4.99.1"; charset=us-ascii
 Content-Description: dmesg-4.99.1
 Content-Disposition: attachment; filename="dmesg-4.99.1"
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.
 
 NetBSD 4.99.1 (CALLEBAUT) #11: Sun Aug 13 20:59:47 PDT 2006
 	ed@callebaut.wing.org:/usr/src/arch/i386/obj/current/src/sys/arch/i386/compile/CALLEBAUT
 total memory = 511 MB
 avail memory = 495 MB
 timecounter: Timecounters tick every 10.000 msec
 timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
 timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
 BIOS32 rev. 0 found at 0xfd890
 mainbus0 (root)
 pci_addr_fixup: 002:05:0 0x1180 0x0476 new address 0x20000000
 pci_addr_fixup: 002:05:1 0x1180 0x0476 new address 0x20001000
 cpu0 at mainbus0: (uniprocessor)
 cpu0: Intel Mobile Pentium 4 (686-class), 1988.61 MHz, id 0xf27
 cpu0: features bfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
 cpu0: features bfebf9ff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
 cpu0: features bfebf9ff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
 cpu0: features2 400<CID>
 cpu0: "Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz"
 cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
 cpu0: L2 cache 512 KB 64B/line 8-way
 cpu0: ITLB 4K/4M: 128 entries
 cpu0: DTLB 4K/4M: 64 entries
 cpu0: using thermal monitor 1
 cpu0: 16 page colors
 acpi0 at mainbus0: Advanced Configuration and Power Interface
 acpi0: using Intel ACPI CA subsystem version 20060217
 acpi0: X/RSDT: OemId <  SONY,      B0,20020801>, AslId <PTL ,00000000>
 acpi0: SCI interrupting at int 9
 timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 timecounter: selected timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
 ACPI-Fast 24-bit timer
 LNKA: ACPI: Found matching pin for 0.29.INTA at func 0: 9
 LNKD: ACPI: Found matching pin for 0.29.INTB at func 1: 9
 LNKC: ACPI: Found matching pin for 0.29.INTC at func 2: 255
 LNKB: ACPI: Found matching pin for 0.31.INTB at func 3: 255
 LNKB: ACPI: Found matching pin for 0.31.INTB at func 5: 9
 LNKA: ACPI: Found matching pin for 1.0.INTA at func 0: 9
 LNKF: ACPI: Found matching pin for 2.5.INTA at func 0: 3
 LNKF: BIOS IRQ 3 for 2.5.INTA is invalid
 LNKG: ACPI: Found matching pin for 2.5.INTB at func 1: 0
 LNKH: ACPI: Found matching pin for 2.5.INTC at func 2: 255
 LNKE: ACPI: Found matching pin for 2.8.INTA at func 0: 9
 ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
 acpi: activated SNY6001
 acpi: activated PNP0C0F
 acpi: activated PNP0C0F
 acpi: activated PNP0C0F
 acpi: activated PNP0C0F
 acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
 acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
 PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
 PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
 PNP0200 [AT DMA Controller] at acpi0 not configured
 npx1 at acpi0 (PNP0C04)
 npx1: io 0xf0-0xff irq 13
 npx1: using exception 16
 PNP0000 [AT Interrupt Controller] at acpi0 not configured
 PNP0B00 [AT Real-Time Clock] at acpi0 not configured
 pcppi1 at acpi0 (PNP0800)
 pcppi1: io 0x61
 midi0 at pcppi1: PC speaker (CPU-intensive output)
 sysbeep0 at pcppi1
 attimer1 at acpi0 (PNP0100): AT Timer
 attimer1: io 0x40-0x43 irq 0
 pckbc1 at acpi0 (PNP0303): kbd port
 pckbc1: io 0x60,0x64 irq 1
 pckbc2 at acpi0 (SNY9003): aux port
 pckbc2: irq 12
 acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
 acpiec0: io 0x62,0x66
 acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
 acpibat1 at acpi0 (PNP0C0A-2): ACPI Battery (Control Method)
 acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
 com0 at acpi0 (PNP0501)
 com0: io 0x3f8-0x3ff irq 4
 com0: ns16550a, working fifo
 lpt0 at acpi0 (PNP0401)
 lpt0: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
 spic0 at acpi0 (SNY6001): Sony Programmable I/O Controller
 spic0: io 0x1080-0x109f irq 11
 wsmouse0 at spic0 mux 0
 sony0 at acpi0 (SNY5001): Sony Miscellaneous Controller
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 PNP0C0F [PCI interrupt link device] at acpi0 not configured
 acpitz0 at acpi0: ACPI Thermal Zone
 acpitz0: unable to get polling interval; using default of 30.0s
 acpitz0: passive cooling mode only
 acpitz0: critical 89.9C passive 50.9C
 apm0 at acpi0: Power Management spec V1.2
 acpibat0: battery info: Sony Corp., LION, , 
 acpiacad0: AC adapter online.
 pcppi1: attached to attimer1
 pckbd0 at pckbc1 (kbd slot)
 pckbc1: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard
 pms0 at pckbc1 (aux slot)
 pms0: Synaptics touchpad version 5.9
 pms0: Palm detect, Multi-finger
 pckbc1: using irq 12 for aux slot
 wsmouse1 at pms0 mux 0
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: Intel 82845 Host (rev. 0x04)
 pchb0: random number generator enabled
 agp0 at pchb0: aperture at 0xec000000, size 0x4000000
 ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x04)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 0 function 0: ATI Technologies Radeon Mobility M7 LW (rev. 0x00)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
 wsmux1: connecting to wsdisplay0
 uhci0 at pci0 dev 29 function 0: Intel 82801CA USB Controller (rev. 0x02)
 uhci0: interrupting at irq 9
 usb0 at uhci0: USB revision 1.0
 uhub0 at usb0
 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 2 ports with 2 removable, self powered
 uhci1 at pci0 dev 29 function 1: Intel 82801CA USB Controller (rev. 0x02)
 uhci1: interrupting at irq 9
 usb1 at uhci1: USB revision 1.0
 uhub1 at usb1
 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 2 ports with 2 removable, self powered
 uhci2 at pci0 dev 29 function 2: Intel 82801CA USB Controller (rev. 0x02)
 LNKC: Picked IRQ 9 with weight 6
 uhci2: interrupting at irq 9
 usb2 at uhci2: USB revision 1.0
 uhub2 at usb2
 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub2: 2 ports with 2 removable, self powered
 ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-PCI Bridge (rev. 0x42)
 pci2 at ppb1 bus 2
 pci2: i/o space, memory space enabled
 cbb0 at pci2 dev 5 function 0: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
 cbb1 at pci2 dev 5 function 1: Ricoh 5C476 PCI-CardBus bridge (rev. 0xa8)
 fwohci0 at pci2 dev 5 function 2: Ricoh 5C552 PCI-CardBus bridge/Firewire (rev. 0x00)
 LNKH: Picked IRQ 9 with weight 9
 fwohci0: interrupting at irq 9
 fwohci0: OHCI version 1.0 (ROM=1)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 08:00:46:03:01:47:2a:31
 fwohci0: Phy 1394a available S400, 2 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 M^We]M-@ at ieee1394if0 not configured
 fwohci0: Initiate bus reset
 fxp0 at pci2 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
 fxp0: interrupting at irq 9
 fxp0: Ethernet address 08:00:46:7a:15:89
 inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 LNKF: Picked IRQ 9 with weight 11
 cbb0: interrupting at irq 9
 cardslot0 at cbb0 slot 0 flags 0
 cardbus0 at cardslot0: bus 3
 pcmcia0 at cardslot0
 LNKG: Picked IRQ 9 with weight 12
 cbb1: interrupting at irq 9
 cardslot1 at cbb1 slot 1 flags 0
 cardbus1 at cardslot1: bus 4
 pcmcia1 at cardslot1
 pcib0 at pci0 dev 31 function 0
 pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
 piixide0 at pci0 dev 31 function 1
 piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
 piixide0: bus-master DMA support present
 piixide0: primary channel configured to compatibility mode
 piixide0: primary channel interrupting at irq 14
 atabus0 at piixide0 channel 0
 piixide0: secondary channel configured to compatibility mode
 piixide0: secondary channel interrupting at irq 15
 atabus1 at piixide0 channel 1
 Intel 82801CA SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
 auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
 auich0: interrupting at irq 9
 auich0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
 auich0: ac97: ext id 604<AC97_22,AMAP,SPDIF>
 auich1 at pci0 dev 31 function 6: i82801CA (ICH3) AC-97 Modem
 auich1: interrupting at irq 9
 auich1: ac97: Conexant HSD11246 codec; no 3D stereo
 auich1: ac97: ext mid 4009<CID1,LINE1>, secondary codec
 auich1: codec not responding, status=0xff00
 isa0 at pcib0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 WARNING: Callback scheduled before sysmon task queue thread present.
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
 audio0 at auich0: full duplex, independent
 Kernelized RAIDframe activated
 IPsec: Initialized Security Association Processing.
 wi0 at pcmcia0 function 0: <Lucent Technologies, WaveLAN/IEEE, Version 01.01, >
 wi0: 802.11 address 00:02:2d:4f:c5:13
 wi0: using Sony WaveLAN/IEEE
 wi0: Lucent Firmware: Station (6.16.1)
 wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
 umass0 at uhub2 port 1 configuration 1 interface 0
 umass0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
 umass0: using ATAPI over CBI with CCI
 atapibus0 at umass0: 2 targets
 sd0 at atapibus0 drive 0: <Sony, MSC-U03, 1.00> disk removable
 sd0: drive offline
 wd0 at atabus0 drive 0: <HTS721010G9AT00>
 wd0: drive supports 16-sector PIO transfers, LBA48 addressing
 wd0: 95396 MB, 193821 cyl, 16 head, 63 sec, 512 bytes/sect x 195371568 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 atapibus1 at atabus1: 2 targets
 cd0 at atapibus1 drive 0: <TOSHIBA DVD-ROM SD-R6012, , 1S31> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
     SENSE KEY:  Not Ready
      ASC/ASCQ:  Medium Not Present
 
 boot device: wd0
 root on wd0a dumps on wd0b
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 set{u,g}id pid 2134 (netstat) was invoked by uid 101 ppid 466 (firefox-bin) with fd 0 closed
 acpilid0: lid closed.
 acpilid0: lid opened.
 
 --==_Exmh_17251853580--