Subject: Re: port-i386/25389: ACPI "couldn't find all PCI bus numbers" panic
To: None <mycroft@netbsd.org, gnats-admin@netbsd.org,>
From: David Brownlee <abs@NetBSD.org>
List: netbsd-bugs
Date: 02/26/2006 22:10:02
The following reply was made to PR port-i386/25389; it has been noted by GNATS.

From: David Brownlee <abs@NetBSD.org>
To: Takayoshi Kochi <kochi@NetBSD.org>
Cc: gnats-bugs@netbsd.org
Subject: Re: port-i386/25389: ACPI "couldn't find all PCI bus numbers" panic
 on shuttle N45G
Date: Sun, 26 Feb 2006 22:07:26 +0000 (GMT)

 On Fri, 17 Feb 2006, Takayoshi Kochi wrote:
 
 > Hi,
 >
 > Is this problem still occuring or fixed?
 > Do you still have access to the machine?
 
  	Testing -current kernel (3.99.15).  GENERIC boots fine.
  	GENERIC.MPACPI hangs after "ieee1394if0: bus manager 0 (me)"
 
  	GENERIC.MPACPI - final output:
 
 [...]
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at irq 15
 atabus1 at viaide0 channel 1
 fwohci0 at pci0 dev 13 function 0: NVIDIA nForce2 Firewire Controller (rev. 0xa3)
 fwohci0: interrupting at irq 7
 fwohci0: OHCI version 1.10 (ROM=0)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:30:1b:30:1b:b1:05:89
 fwohci0: Phy 1394a available S400, 3 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ppb1 at pci0 dev 30 function 0: NVIDIA nForce2 PCI-PCI Bridge (rev. 0xc1)
 pci2 at ppb1 bus 3
 pci2: i/o space, memory space enabled
 isa0 at pcib0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 isapnp0: no ISA Plug 'n Play devices found
 ioapic0: enabling
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 
  	GENERIC - boots perfectly.
 
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
      The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
      The Regents of the University of California.  All rights reserved.
 
 NetBSD 3.99.15 (GENERIC) #0: Fri Feb 17 19:20:51 GMT 2006
  	abs@tll.i:/files/netbsd/current/sys/arch/i386/compile/obj/GENERIC
 total memory = 767 MB
 avail memory = 744 MB
 BIOS32 rev. 0 found at 0xfb760
 mainbus0 (root)
 cpu0 at mainbus0: (uniprocessor)
 cpu0: AMD Athlon XP 2600+ (686-class), 2088.18 MHz, id 0x681
 cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
 cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
 cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
 cpu0: "AMD Athlon(tm) XP 2600+"
 cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
 cpu0: L2 cache 256 KB 64B/line 16-way
 cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
 cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
 cpu0: 8 page colors
 pci0 at mainbus0 bus 0: configuration mode 1
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 pchb0 at pci0 dev 0 function 0
 pchb0: NVIDIA nForce2 Host-PCI Bridge (rev. 0xc1)
 agp at pchb0 not configured
 NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 1 not configured
 NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 2 not configured
 NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 3 not configured
 NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 4 not configured
 NVIDIA nForce2 Memory Controller (RAM memory, revision 0xc1) at pci0 dev 0 function 5 not configured
 pcib0 at pci0 dev 1 function 0
 pcib0: NVIDIA nForce2 PCI-ISA bridge (rev. 0xa4)
 NVIDIA nForce2 SMBus Controller (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
 ohci0 at pci0 dev 2 function 0: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
 ohci0: interrupting at irq 10
 ohci0: OHCI version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
 uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub0: 3 ports with 3 removable, self powered
 ohci1 at pci0 dev 2 function 1: NVIDIA nForce2 USB Host Controller (rev. 0xa4)
 ohci1: interrupting at irq 11
 ohci1: OHCI version 1.0, legacy support
 usb1 at ohci1: USB revision 1.0
 uhub1 at usb1
 uhub1: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
 uhub1: 3 ports with 3 removable, self powered
 ehci0 at pci0 dev 2 function 2: NVIDIA nForce2 USB2 Host Controller (rev. 0xa4)
 ehci0: interrupting at irq 3
 ehci0: BIOS has given up ownership
 ehci0: EHCI version 1.0
 ehci0: companion controllers, 4 ports each: ohci0 ohci1
 usb2 at ehci0: USB revision 2.0
 uhub2 at usb2
 uhub2: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
 uhub2: 6 ports with 6 removable, self powered
 NVIDIA nForce2 Ethernet (ethernet network, revision 0xa1) at pci0 dev 4 function 0 not configured
 NVIDIA nForce2 MCP-T Audio Processing Unit (audio multimedia, revision 0xa2) at pci0 dev 5 function 0 not configured
 auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
 auich0: interrupting at irq 12
 auich0: ac97: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
 auich0: ac97: ext id 5c7<AC97_22,LDAC,SDAC,CDAC,SPDIF,DRA,VRA>
 ppb0 at pci0 dev 8 function 0: NVIDIA nForce2 PCI-PCI bridge (rev. 0xa3)
 pci1 at ppb0 bus 1
 pci1: i/o space, memory space enabled
 vga1 at pci1 dev 6 function 0: ATI Technologies Radeon 9000 (PCI) (rev. 0x01)
 wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
 wsmux1: connecting to wsdisplay0
 viaide0 at pci0 dev 9 function 0
 viaide0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
 viaide0: bus-master DMA support present
 viaide0: primary channel configured to compatibility mode
 viaide0: primary channel interrupting at irq 14
 atabus0 at viaide0 channel 0
 viaide0: secondary channel configured to compatibility mode
 viaide0: secondary channel interrupting at irq 15
 atabus1 at viaide0 channel 1
 fwohci0 at pci0 dev 13 function 0: NVIDIA nForce2 Firewire Controller (rev. 0xa3)
 fwohci0: interrupting at irq 7
 fwohci0: OHCI version 1.10 (ROM=0)
 fwohci0: No. of Isochronous channels is 4.
 fwohci0: EUI64 00:30:1b:30:1b:b1:05:89
 fwohci0: Phy 1394a available S400, 3 ports.
 fwohci0: Link S400, max_rec 2048 bytes.
 ieee1394if0 at fwohci0: IEEE1394 bus
 fwip0 at ieee1394if0: IP over IEEE1394
 fwohci0: Initiate bus reset
 ppb1 at pci0 dev 30 function 0: NVIDIA nForce2 PCI-PCI Bridge (rev. 0xc1)
 pci2 at ppb1 bus 3
 pci2: i/o space, memory space enabled
 isa0 at pcib0
 com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
 pckbc0 at isa0 port 0x60-0x64
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
 wskbd0 at pckbd0: console keyboard, using wsdisplay0
 attimer0 at isa0 port 0x40-0x43: AT Timer
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: PC speaker
 sysbeep0 at pcppi0
 isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
 npx0 at isa0 port 0xf0-0xff: using exception 16
 fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
 pcppi0: attached to attimer0
 isapnp0: no ISA Plug 'n Play devices found
 fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
 ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
 ieee1394if0: bus manager 0 (me)
 auich0: measured ac97 link rate at 48004 Hz, will use 48000 Hz
 audio0 at auich0: full duplex, mmap, independent
 Kernelized RAIDframe activated
 uhub3 at uhub1 port 2
 uhub3: Lite-On Tech USB 1.1 2 port downstream low-power hub, class 9/0, rev 1.10/1.26, addr 2
 uhub3: 4 ports with 2 removable, bus powered
 wd0 at atabus0 drive 0: <Maxtor 4D080H4>
 wd0: drive supports 16-sector PIO transfers, LBA addressing
 wd0: 78167 MB, 158816 cyl, 16 head, 63 sec, 512 bytes/sect x 160086528 sectors
 wd0: 32-bit data port
 wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
 wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
 uhidev0 at uhub3 port 3 configuration 1 interface 0
 uhidev0: Lite-On Tech IBM USB Travel Keyboard with UltraNav, rev 1.10/1.16, addr 3, iclass 3/1
 ukbd0 at uhidev0
 wskbd1 at ukbd0 mux 1
 wskbd1: connecting to wsdisplay0
 uhidev1 at uhub3 port 3 configuration 1 interface 1
 uhidev1: Lite-On Tech IBM USB Travel Keyboard with UltraNav, rev 1.10/1.16, addr 3, iclass 3/0
 uhidev1: 3 report ids
 uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
 uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
 uhidev2 at uhub3 port 4 configuration 1 interface 0
 uhidev2: Synaptics Inc. Composite TouchPad / TrackPoint, rev 1.10/0.15, addr 4, iclass 3/1
 ums0 at uhidev2: 3 buttons
 wsmouse0 at ums0 mux 0
 uhidev3 at uhub3 port 4 configuration 1 interface 1
 uhidev3: Synaptics Inc. Composite TouchPad / TrackPoint, rev 1.10/0.15, addr 4, iclass 3/1
 ums1 at uhidev3: 3 buttons
 wsmouse1 at ums1 mux 0
 atapibus0 at atabus1: 2 targets
 cd0 at atapibus0 drive 0: <YAMAHA  CRW2200E, , 1.0D> cdrom removable
 cd0: 32-bit data port
 cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
 cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
 boot device: wd0
 root on wd0a dumps on wd0b
 root file system type: ffs
 wsdisplay0: screen 1 added (80x25, vt100 emulation)
 wsdisplay0: screen 2 added (80x25, vt100 emulation)
 wsdisplay0: screen 3 added (80x25, vt100 emulation)
 wsdisplay0: screen 4 added (80x25, vt100 emulation)
 url0 at uhub1 port 1
 url0: REALTEK USB 10/100 LAN, rev 1.10/1.00, addr 5
 url0: Ethernet address 00:0b:2b:15:88:11
 urlphy0 at url0 phy 0: Realtek RTL8150L internal media interface
 urlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
 
 -- 
  		David/absolute       -- www.NetBSD.org: No hype required --