The following reply was made to PR port-sgimips/32160; it has been noted by GNATS.

From: Christian Herzog <daduke@daduke.org>
To: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>, gnats-bugs@netbsd.org
Cc: 
Subject: Re: port-sgimips/32160
Date: Sat, 3 Dec 2005 15:24:02 +0100

 > - dmesg
 Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
     The NetBSD Foundation, Inc.  All rights reserved.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
 The Regents of the University of California.  All rights reserved.
 NetBSD 2.1 (GENERIC32_IP3x) #0: Tue Oct 25 00:48:05 UTC 2005
         builds@b3.netbsd.org:/home/builds/ab/netbsd-2-1-RELEASE/sgimips/200510241747Z-obj/home/builds/ab/netbsd-2-1-RELEASE/src/sys/arch/sgimips/compile/GENERIC32_IP3x
 
 total memory = 256 MB - btw, the machine has 320 MB, more than 256 not
 supported?
 (6848 KB reserved for ARCS)
 avail memory = 238 MB
 mainbus0 (root): SGI-IP32 [SGI, 1], 1 processor
 cpu0 at mainbus0: MIPS R10000 CPU (0x934) Rev. 3.4 with built-in FPU
 Rev. 0.0
 cpu0: 32KB/64B 2-way set-associative L1 Instruction cache, 64 TLB
 entries
 cpu0: 32KB/32B 2-way set-associative write-back L1 Data cache
 cpu0: 1024KB/64B 2-way set-associative write-back L2 Data cache
 crime0 at mainbus0 addr 0x14000000: rev 1.1 (CRIME_ID: a1)
 mace0 at mainbus0 addr 0x1f000000
 com0 at mace0 offset 0x390000 intr 4 intrmask 0x3f00000: ns16550a,
 working fifo
 com0: console
 mace: established interrupt 4 (level 3f00000)
 com1 at mace0 offset 0x398000 intr 4 intrmask 0xfc000000: ns16550a,
 working fifo
 mace: established interrupt 4 (level fc000000)
 pckbc0 at mace0 offset 0x320000 intr 5 intrmask 0x0
 mcclock0 at mace0 offset 0x3a0000 intrmask 0x0
 mec0 at mace0 offset 0x280000 intr 3 intrmask 0x0: MAC-110 Ethernet, rev
 1
 mec0: Ethernet address 08:00:69:0e:7c:31
 nsphy0 at mec0 phy 9: DP83840 10/100 media interface, rev. 1
 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 100baseT4, auto
 mace: established interrupt 3 (level 0)
 macepci0 at mace0 offset 0x80000 intr 7 intrmask 0x0: rev 1
 pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x00001000 (size
 0x100)
 pci_addr_fixup: 000:01:0 0x9004 0x8078 new address 0x80100000 (size
 0x1000)
 pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x00002000 (size
 0x100)
 pci_addr_fixup: 000:02:0 0x9004 0x8078 new address 0x80200000 (size
 0x1000)
 mace: established interrupt 7 (level 0)
 pci0 at macepci0 bus 0
 pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
 ahc0 at pci0 dev 1 function 0: Adaptec aic7880 Ultra SCSI adapter
 ahc0: interrupting at crime interrupt 8
 ahc0: Using left over BIOS settings
 ahc0: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
 scsibus0 at ahc0: 16 targets, 8 luns per target
 ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
 ahc1: interrupting at crime interrupt 9
 ahc1: Using left over BIOS settings
 ahc1: aic7880: Wide Channel A, SCSI Id=0, 16/253 SCBs
 scsibus1 at ahc1: 16 targets, 8 luns per target
 biomask 07 netmask 07 ttymask 07 clockmask 87
 scsibus0: waiting 2 seconds for devices to settle...
 scsibus1: waiting 2 seconds for devices to settle...
 sd0 at scsibus0 target 2 lun 0: <SEAGATE, ST318275LC, 0001> disk fixed
 sd0: 17366 MB, 11721 cyl, 10 head, 303 sec, 512 bytes/sect x 35566480
 sectors
 sd0: async, 8-bit transfers, tagged queueing
 cd0 at scsibus0 target 4 lun 0: <TOSHIBA, CD-ROM XM-6201TA, 1037> cdrom
 removable
 cd0: async, 8-bit transfers
 boot device: sd0
 root on sd0a dumps on sd0b
 root file system type: ffs
 
 > - type/status of your HUB (speed/duplex, switching/dumb etc.)
 same problem on Surecom EP-816 switch and crossover to my Linux box
 (rtl8139), both 100base-T
 
 > - output of 'ifconfig -m mec0'
 mec0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
 address: 08:00:69:0e:7c:31
 media: Ethernet autoselect
 status: active
 supported Ethernet media:
 media none
 media 10baseT
 media 10baseT
 mediaopt full-duplex
 media 100baseTX
 media 100baseTX
 mediaopt full-duplex
 media 100baseT4
 media autoselect
 inet 62.32.20.245 netmask 0xfffffff0 broadcast 62.32.20.255
 inet6 fe80::a00:69ff:fe0e:7c31%mec0 prefixlen 64 scopeid 0x1
 
 > - contents of /etc/ifconfig.mec0
 mec0 configured in rc.conf:
 ifconfig_mec0="inet 62.32.20.245 netmask 255.255.255.240"
 defaultroute="62.32.20.241"