The following reply was made to PR kern/30906; it has been noted by GNATS.

From: Manuel Bouyer <bouyer@antioche.eu.org>
To: gnats-bugs@NetBSD.org
Cc: kern-bug-people@NetBSD.org, gnats-admin@NetBSD.org,
	netbsd-bugs@NetBSD.org
Subject: Re: kern/30906: ethernet medium not detected on wm0
Date: Thu, 4 Aug 2005 12:10:23 +0200

 On Wed, Aug 03, 2005 at 06:57:01PM +0000, Martin Husemann wrote:
 > >Description:
 > 
 > I replaced a working wm0 "workstion" card (i.e. 32bit PCI only) 1000/MT card
 > with a server version (64bit PCI) 1000/T. Dmesg is:
 > 
 > wm0 at pci1 dev 2 function 0: Intel i82543GC 1000BASE-T Ethernet, rev. 2
 > wm0: interrupting at ioapic1 pin 5 (irq 15)
 > wm0: 64-bit 33MHz PCI bus
 > wm0: 64 word (6 address bits) MicroWire EEPROM
 > wm0: Ethernet address 00:03:47:25:42:14
 > makphy0 at wm0 phy 1: Marvell 88E1000 Gigabit PHY, rev. 2
 > makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 > 
 > [...]
 > 
 > No idea - maybe it happens for all 1000/T cards with makphy?
 
 As a data point, I have:
 wm0 at pci0 dev 10 function 0: Intel i82545GM 1000BASE-T Ethernet, rev. 4
 wm0: interrupting at irq 18, event channel 7
 wm0: 32-bit 33MHz PCI bus
 wm0: 256 word (8 address bits) MicroWire EEPROM
 wm0: Ethernet address 00:04:23:b7:71:d4
 makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 5
 makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
 
 on a 3.0_BETA system, and it works fine:
 wm0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
         capabilities=87<IP4CSUM,TCP4CSUM,UDP4CSUM,TSO4>
         enabled=0
         address: 00:04:23:b7:71:d4
         media: Ethernet autoselect (1000baseT full-duplex,flowcontrol,master,rxpause,txpause)
         status: active
         inet6 fe80::204:23ff:feb7:71d4%wm0 prefixlen 64 scopeid 0x1
 
 -- 
 Manuel Bouyer <bouyer@antioche.eu.org>
      NetBSD: 26 ans d'experience feront toujours la difference
 --