On Sun, 2 Nov 2003, Manuel Bouyer wrote:

> Can you also post the dmesg for a successul boot without the transceiver ?

Here it is:

console is keyboard/display
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6.1 (GENERIC) #0: Mon Apr  7 10:27:16 UTC 2003

autobuild@cs20.apochromatic.org:/autobuilder/build/netbsd-1-6/sparc64/OBJ/autobuilder/build/netbsd-
1-6/src/sys/arch/sparc64/compile/GENERIC
total memory = 320 MB
avail memory = 287 MB
using 2060 buffers containing 16480 KB of memory
bootpath: /sbus@1f,0/SUNW,fas@e,8800000/sd@0,0
mainbus0 (root): SUNW,Ultra-2
cpu0 at mainbus0: SUNW,UltraSPARC @ 167.992 MHz, version 0 FPU
cpu0: physical 32K instruction (32 b/l), 16K data (32 b/l), 512K external
(64 b/l)
timer0 at mainbus0 addr 0xfffc3c00 irq vectors 7f0 and 7f1
sbus0 at mainbus0 addr 0xfffc8000: clock = 25 MHz
DVMA map: ff800000 to ffffe000
IOTSB: 179c000 to 179e000
audiocs0 at sbus0 slot 13 offset 0xc000000 vector 24 ipl 13: CS4231A
audio0 at audiocs0: full duplex
auxio0 at sbus0 slot 15 offset 0x1900000
flashprom at sbus0 slot 15 offset 0x0 not configured
SUNW,fdtwo at sbus0 slot 15 offset 0x1400000 vector 29 ipl 11 not
configured
clock0 at sbus0 slot 15 offset 0x1200000: mk48t59: hostid 80859504
zs0 at sbus0 slot 15 offset 0x1100000 vector 28 ipl 12 softpri 6
zstty0 at zs0 channel 0
zstty1 at zs0 channel 1
zs1 at sbus0 slot 15 offset 0x1000000 vector 28 ipl 12 softpri 6
zstty2 at zs1 channel 0 (console input)
kbd0 at zstty2 (console input)
zstty3 at zs1 channel 1
ms0 at zstty3
sc at sbus0 slot 15 offset 0x1300000 not configured
SUNW,pll at sbus0 slot 15 offset 0x1304000 not configured
esp0 at sbus0 slot 14 offset 0x8800000 vector 20 ipl 3: FAS366/HME, 40MHz,
SCSI ID 7
scsibus0 at esp0: 16 targets, 8 luns per target
hme0 at sbus0 slot 14 offset 0x8c00000 vector 21 ipl 6: Sun Happy Meal
Ethernet (SUNW,hme)
hme0: Ethernet address 08:00:20:85:95:04
bpp0 at sbus0 slot 14 offset 0xc800000 vector 22 ipl 2: dma rev unknown
(0x20000000)
dma0 at sbus0 slot 2 offset 0x81000: dma rev esc
esp1 at dma0 slot 2 offset 0x80000 vector 3 ipl 3: ESP200, 40MHz, SCSI ID
7
scsibus1 at esp1: 8 targets, 8 luns per target
lebuffer0 at sbus0 slot 2 offset 0x40000: 128K memory
le0 at lebuffer0 slot 2 offset 0x60000 vector 4 ipl 6: address
08:00:20:85:95:04
le0: 64 receive buffers, 16 transmit buffers
SUNW,ffb at mainbus0 addr 0xfec00000 not configured
pcons at mainbus0 not configured
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST34572WC, 0876> SCSI2 0/direct
fixed
sd0: 4340 MB, 6300 cyl, 8 head, 176 sec, 512 bytes/sect x 8888924 sectors
esp0: wide mode 1
sd0: sync (100.0ns offset 15), 16-bit (20.000MB/s) transfers, tagged
queueing
cd0 at scsibus0 target 6 lun 0: <TOSHIBA, XM6201TASUN32XCD, 1103> SCSI2
5/cdrom removable
cd0: sync (100.0ns offset 15), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...
Kernelized RAIDframe activated
root on sd0a dumps on sd0b
root file system type: ffs