>Number:         15116
>Category:       port-i386
>Synopsis:       (1.5) vr0: receive error: unknown rx error
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    port-i386-maintainer
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Jan 02 13:04:00 PST 2002
>Closed-Date:
>Last-Modified:
>Originator:     Matthias Buelow
>Release:        1.5-RELEASE
>Organization:
>Environment:
System: NetBSD mail.mayn.de 1.5 NetBSD 1.5 (POSTBUS) #6: Tue Aug 21 15:36:07 CEST 2001 root@mail.mayn.de:/usr/src/sys/arch/i386/compile/POSTBUS i386


>Description:

After several months of uptime, the machine has developped some
misbehaviour which results in the following lines from the kernel:

vr0: receive error: unknown rx error

at which point the network is dead and can only be revived through
a reboot.
This appears to be some problems in the VIA-Rhine ethernet driver
and/or the hardware.
The machine is running 1.5/i386.  I currently don't have the resources
left to test a newer version of NetBSD on this machine, I will however
upgrade to 1.5.3 when it's available.

Here's a complete dmesg:


NetBSD 1.5 (POSTBUS) #6: Tue Aug 21 15:36:07 CEST 2001
    root@mail.mayn.de:/usr/src/sys/arch/i386/compile/POSTBUS
cpu0: AMD K6-III (586-class)
total memory = 127 MB
avail memory = 109 MB
using 3260 buffers containing 13040 KB of memory
BIOS32 rev. 0 found at 0xfb270
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT82C597 (Apollo VP3) Host-PCI Bridge (rev. 0x04)
ppb0 at pci0 dev 1 function 0: VIA Technologies VT82C598 (Apollo MVP3) PCI-AGP (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Mach64 GB (rev. 0x5c)
wsdisplay0 at vga1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: VIA Technologies VT82C596A (Apollo Pro) PCI-ISA Bridge (rev. 0x09)
pciide0 at pci0 dev 7 function 1: VIA Tech VT82C586A IDE Controller (rev. 0x06)
pciide0: device disabled (at device)
pchb1 at pci0 dev 7 function 3
pchb1: VIA Technologies product 0x3050 (rev. 0x00)
siop0 at pci0 dev 9 function 0: Symbios Logic 53c875 (ultra-wide scsi)
siop0: using on-board RAM
siop0: interrupting at irq 11
scsibus0 at siop0: 16 targets, 8 luns per target
vr0 at pci0 dev 11 function 0: VIA VT3043 (Rhine) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:50:ba:bd:54:80
dmphy0 at vr0 phy 8: DM9101 10/100 media interface, rev. 0
dmphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask fbed netmask ffed ttymask ffef
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <IBM, DDRS-34560D, DC1B> SCSI2 0/direct fixed
siop0: target 1 using 16bit transfers
siop0: target 1 now synchronous at 20.0Mhz, offset 15
sd0: 4357 MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
sd1 at scsibus0 target 2 lun 0: <IBM, DDRS-34560W, S71D> SCSI2 0/direct fixed
siop0: target 2 using 16bit transfers
siop0: target 2 now synchronous at 20.0Mhz, offset 15
sd1: 4357 MB, 8387 cyl, 5 head, 212 sec, 512 bytes/sect x 8925000 sectors
sd2 at scsibus0 target 3 lun 0: <IBM, DNES-309170W, SA30> SCSI3 0/direct fixed
siop0: target 3 using 16bit transfers
siop0: target 3 now synchronous at 20.0Mhz, offset 16
sd2: 8748 MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sect x 17916240 sectors
sd3 at scsibus0 target 4 lun 0: <IBM, DNES-309170W, SA30> SCSI3 0/direct fixed
siop0: target 4 using 16bit transfers
siop0: target 4 now synchronous at 20.0Mhz, offset 16
sd3: 8748 MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sect x 17916240 sectors
sd4 at scsibus0 target 5 lun 0: <IBM, DNES-309170W, SA30> SCSI3 0/direct fixed
siop0: target 5 using 16bit transfers
siop0: target 5 now synchronous at 20.0Mhz, offset 16
sd4: 8748 MB, 11474 cyl, 5 head, 312 sec, 512 bytes/sect x 17916240 sectors
Kernelized RAIDframe activated
RAID autoconfigure
Configuring raid0:
RAIDFRAME: protectedSectors is 64
RAIDFRAME: Configure (RAID Level 1): total number of sectors is 7974016 (3893 MB)
RAIDFRAME(RAID Level 1): Using 6 floating recon bufs with no head sep limit
RAID autoconfigure
Configuring raid1:
RAIDFRAME: Configure (RAID Level 5): total number of sectors is 35832320 (17496 MB)
RAIDFRAME(RAID Level 5): Using 20 floating recon bufs with head sep limit 10
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
WARNING: raid1: total sector size in disklabel (35831808) != the size of raid (35832320)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
WARNING: raid1: total sector size in disklabel (35831808) != the size of raid (35832320)
	
>How-To-Repeat:
>Fix:
>Release-Note:
>Audit-Trail:
>Unformatted:
 From: mkb
 Reply-To: mkb
 X-send-pr-version: 3.95