>Number:         12122
>Category:       kern
>Synopsis:       3com FEM656-C combo card not supported by 1.5 laptop install kernel
>Confidential:   no
>Severity:       non-critical
>Priority:       medium
>Responsible:    kern-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sat Feb 03 09:52:00 PST 2001
>Closed-Date:
>Last-Modified:
>Originator:     Frederick Bruckman
>Release:        1.5
>Organization:

Frederick
>Environment:
	
System: NetBSD 1.5 (INSTALL_LAPTOP) #1: Sun Nov 19 22:08:51 MET 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/INSTALL_LAPTOP

>Description:
	
	Other cardbus cards work on this same laptop (with 1.5 bootlap{1,2}.fs, too),
	so there doesn't seem to be any problem with the CardBus parts. Follows is
	the contents of /kern/msgbuf with the 656 Combo card. (The last few lines
	indicate that hot-swapping was successful, which is how I got the msgbuf out,
	as I don't have NetBSD on this laptop at the moment.)

NetBSD 1.5 (INSTALL_LAPTOP) #1: Sun Nov 19 22:08:51 MET 2000
    fvdl@sushi:/work/trees/netbsd-1-5/sys/arch/i386/compile/INSTALL_LAPTOP
cpu0: Intel Pentium II (Deschutes) (686-class)
total memory = 65152 KB
avail memory = 56272 KB
using 840 buffers containing 3360 KB of memory
BIOS32 rev. 0 found at 0xfd7f6
PCI BIOS rev. 2.1 found at 0xfd9f9
PCI IRQ Routing Table rev. 1.0 found at 0xfdf80, size 96 bytes (4 entries)
PCI Interrupt Router at 000:07:0 (vendor 0x8086 product 0x122e)
pci_addr_fixup: 000:00:0 0x8086 0x7192 new address 0x04000000
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7192 (rev. 0x02)
vendor 0x10c8 product 0x0004 (VGA display, revision 0x01) at pci0 dev 2 function 0 not configured
cbb0 at pci0 dev 4 function 0: vendor 0x104c product 0xac15 (rev. 0x01)
cbb1 at pci0 dev 4 function 1: vendor 0x104c product 0xac15 (rev. 0x01)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DTCA-24090>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 3909 MB, 7944 cyl, 16 head, 63 sec, 512 bytes/sect x 8007552 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-1702BC, \377\377\377\377, 1854> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
cbb0: interrupting at irq 11
cbb0: cacheline 0x0 lattimer 0x20
cbb0: bhlc 0x821000 lscp 0x20010100
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cbb1: cacheline 0x0 lattimer 0x20
cbb1: bhlc 0x821000 lscp 0x20020200
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 2 device 0 cacheline 0x0, lattimer 0x20
pcmcia1 at cardslot1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pc0 at isa0 port 0x60-0x6f irq 1: color
pc0: console
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask ffed netmask ffed ttymask ffef
md0: internal 2048K image area
3Com Corporation, 3CXFEM656C-LAN, LAN, 1 (manufacturer 0x0, product 0x0) vendor 0x10b7 product 0x6564 (ethernet network, revision 0x10) at cardbus0 dev 0 function 0 not configured
3Com Corporation, 3CXFEM656C-MDM, MDM, 1 (manufacturer 0x0, product 0x0) vendor 0x10b7 product 0x6565 (miscellaneous communications, revision 0x10) at cardbus0 dev 0 function 1 not configured
wd0: no disk label
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
ex0 at cardbus0 dev 0 function 0: 3Com 3c575B-TX Ethernet
ex0: interrupting at 11
ex0: MAC address 00:00:86:3f:28:1b
tqphy0 at ex0 phy 0: 78Q2120 10/100 media interface, rev. 11
tqphy0: 10baseT, 100baseTX, auto

>How-To-Repeat:
	
	Make floppies from the .../NetBSD-1.5/i386/installation/floppy/bootlap{1,2}.fs
	images, boot.
>Fix:
	
>Release-Note:
>Audit-Trail:
>Unformatted: