>Number:         8873
>Category:       kern
>Synopsis:       Tigon Gigabit Card does not configure in Alphapc 164
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    kern-bug-people (Kernel Bug People)
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Thu Nov 25 05:06:01 1999
>Last-Modified:
>Originator:     Juergen Weiss
>Organization:
Uni Mainz
>Release:        NetBSD 1.4M
>Environment:
NetBSD netadmin.zdv.Uni-Mainz.DE 1.4M NetBSD 1.4M (GENERIC) #15: Sun Nov  7 21:24:26 EST 1999     dan@anarres:/home/NetBSD/src/sys/arch/alpha/compile/GENERIC alpha
>Description:
We plugged a netgear ga620 gigabit ethernet card into a 64bit
PCI slot on our alphapc 164. The card does not configure with
the error message 'can't map i/o space'.  The card works with
FreeBSD on the same hardware. 


NetBSD 1.4M (GENERIC) #15: Sun Nov  7 21:24:26 EST 1999
    dan@anarres:/home/NetBSD/src/sys/arch/alpha/compile/GENERIC
Digital AlphaPC 164 500 MHz
8192 byte page size, 1 processor.
total memory = 256 MB
(2448 KB reserved for PROM, 253 MB used by NetBSD)
avail memory = 231 MB
using 1635 buffers containing 13080 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2 (pass 2)
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (ALCOR/ALCOR2), pass 3
cia0: extended capabilities: 21<DWEN,BWEN>
cia0: using BWX for PCI config access
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ncr0 at pci0 dev 5 function 0: ncr 53c810 fast10 scsi
ncr0: interrupting at eb164 irq 2
ncr0: minsync=25, maxsync=206, maxoffs=8, 16 dwords burst, normal dma fifo
ncr0: single-ended, open drain IRQ driver
ncr0: restart (scsi reset).
scsibus0 at ncr0: 8 targets, 8 luns per target
ti0 at pci0 dev 6 function 0: can't map i/o space
tlp0 at pci0 dev 7 function 0: Lite-On 82C169 Ethernet, pass 2.0
tlp0: interrupting at eb164 irq 1
tlp0: Ethernet address 00:a0:cc:53:29:ba
ukphy0 at tlp0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0021, rev. 2
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sio0 at pci0 dev 8 function 0: Intel 82378ZB System I/O (SIO) (rev. 0x43)
fpa0 at pci0 dev 9 function 0: DEC DEFPA PCI FDDI DAS Controller
fpa0: FDDI address 08:00:2b:b3:e0:d0, FW=2.46, HW=0, SMT V7.2
fpa0: FDDI Port[A] = A (PMD = ANSI Multi-Mode), FDDI Port[B] = B (PMD = ANSI Multi-Mode)
fpa0: interrupting at eb164 irq 3
pciide0 at pci0 dev 11 function 0: CMD Technology PCI0646
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DTTA-350640>
wd0: drive supports 16-sector pio transfers, lba addressing
wd0: 6197MB, 13431 cyl, 15 head, 63 sec, 512 bytes/sect x 12692736 sectors
wd0: 32-bits data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: secondary channel ignored (disabled)
isa0 at sio0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
lpt0 at isa0 port 0x3bc-0x3bf irq 7
pckbc0 at isa0 port 0x60-0x64
pcppi0 at isa0 port 0x61
spkr0 at pcppi0


>How-To-Repeat:
See above
>Fix:


>Audit-Trail:
>Unformatted: