>Number:         7603
>Category:       misc
>Synopsis:       ix manpage incorrectly named ie
>Confidential:   no
>Severity:       non-critical
>Priority:       low
>Responsible:    misc-bug-people (Misc Bug People)
>State:          open
>Class:          doc-bug
>Submitter-Id:   net
>Arrival-Date:   Tue May 18 16:05:00 1999
>Last-Modified:
>Originator:     Gregory McGarry
>Organization:
Queensland University of Technology
>Release:        NetBSD/i386 1.4
>Environment:

>Description:
The ie driver (isa) has been made MI.  The isa driver is now called
ix, but the manpage has not been changed to reflect the change in
name.

Given that the driver is now MI, should it be moved from man4.i386?

I also notice that the iy driver refers to the ie manpage.
>How-To-Repeat:
man ix
man ie

>Fix:
--- ie.4        Wed May 19 08:35:58 1999
+++ ix.4        Wed May 19 08:51:38 1999
@@ -23,21 +23,22 @@
 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.Dd July 10, 1995
-.Dt IE 4 i386
+.Dd May 19, 1999
+.Dt IX 4
 .Os
 .Sh NAME
-.Nm ie 
-.Nd Ethernet driver for Intel 82586 Ethernet chip
+.Nm ix 
+.Nd Ethernet driver for Intel EtherExpress/16
 .Sh SYNOPSIS
-.Cd "ie0 at isa? port 0x360 irq 7 iomem 0xd0000"
+.Cd "ix0 at isa? port {port} irq {irq}"
 .Sh DESCRIPTION
 The
 .Nm
-interface provides access to a 10 Mb/s Ethernet network via the
-Intel 82586 chips.  The Ethernet cards supported by the
-.Nm
-interface are:
+driver supports the EtherExpress/16 card, providing access to a
+10 Mb/s Ethernet network via the Intel 82586 chip.  The driver
+might support other
+.Tn ISA
+cards using the same chip such as
 .Pp
 .Bl -tag -width -offset indet -compact
 .It AT&T StarLAN 10
@@ -45,11 +46,44 @@
 .It AT&T StarLan Fiber
 .It 3Com 3c507
 .El
+.Sh MEDIA SELECTION
+The different models of the supported boards come with some subset of RJ-45,
+.Tn BNC
+and
+.Tn AUI
+connectors.
+Supported media include:
+.Pp
+.Bl -tag -width xxxxxxxxxx -offset indent
+.It AUI/DIX
+Standard 15 pin connector
+.It 10Base2
+BNC, also known as thin-net
+.It 10BaseT
+UTP, also known as twisted pair
+.El
+.Pp
+The default port to use is the port the card autodetects at
+.Ic ifconfig up
+time.
+To choose an alternative port, an explicit medium can be specified to
+.Xr ifconfig 8
+or in your
+.Pa ifconfig.ix?
+file.
+.Pp
+.Sh NOTES
+The EtherExpress PRO card has no jumpers to set the address.
+.Tn Intel
+supplies software to set the address of the card in software.
+You have to hardwire this address in your kernel configuration file.
+.Pp
 .Sh SEE ALSO
-.Xr ifconfig 8 ,
 .Xr intro 4 ,
 .Xr ed 4 ,
 .Xr eg 4 ,
 .Xr el 4 ,
 .Xr ep 4 ,
-.Xr le 4
+.Xr le 4 ,
+.Xr ix 4
+.Xr ifconfig 8
--- iy.4.orig   Wed May 19 08:54:54 1999
+++ iy.4        Wed May 19 08:55:45 1999
@@ -82,7 +82,7 @@
 .Xr eg 4 ,
 .Xr el 4 ,
 .Xr ep 4 ,
-.Xr ie 4 ,
+.Xr ix 4 ,
 .Xr le 4 ,
 .Xr ifconfig 8
 .Sh STANDARDS

>Audit-Trail:
>Unformatted: