>Number:         7002
>Category:       kern
>Synopsis:       i386 kernel build failure since Feb 5th
>Confidential:   no
>Severity:       serious
>Priority:       medium
>Responsible:    kern-bug-people (Kernel Bug People)
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Sun Feb 14 08:50:01 1999
>Last-Modified:
>Originator:     Bjoern Labitzke
>Organization:
	
>Release:        All current sources after Feb 5th
>Environment:
	
System: NetBSD labitzke.isdn.cs.tu-berlin.de 1.3I NetBSD 1.3I (LABITZKE) #168: Fri Feb 5 08:46:06 CET 1999 root@labitzke.isdn.cs.tu-berlin.de:/usr/src/sys/arch/i386/compile/LABITZKE i386


>Description:

On Feb, 5th, I succeeded in building a kernel for the last time until
today, Feb 14th. In hope of getting a perhaps changed build environment I
updated my userland several times, the last time yesterday. Nothing
changed. I am stuck with the following error report:

[...]
cc -O2 -Werror -Wall -Wmissing-prototypes -Wstrict-prototypes  -Wpointer-arith -Wno-main -I/usr/src/sys/lib/libkern/arch/i386 -I../../. -I../../../../../../arch -I../../../../../.. -nostdinc -DLKM -DDIAGNOSTIC -DLINUX_GCC_SIGNATURE -DEXT2FS_SYSTEM_FLAGS -DMAXUSERS=32 -D_KERNEL -Di386  -nostdinc -idirafter /./usr/include -c /usr/src/sys/lib/libkern/pmatch.c
building standard kern library
/usr/bin/nm: __main.o: No such file or directory
/usr/bin/nm: __assert.o: No such file or directory
ld: __assert.o: No such file or directory
*** Error code 1

Stop.


Before I did a config, make clean, make depend.

	
>How-To-Repeat:
Use the following from GENERIC derived config file to produce a i386
kernel:

#	$NetBSD: GENERIC,v 1.219 1999/02/02 16:18:17 bouyer Exp $
#
#	GENERIC -- everything that's currently supported
#

include "arch/i386/conf/std.i386"

maxusers	32		# estimated number of users

# CPU support.  At least one is REQUIRED.
#options 	I386_CPU
#options 	I486_CPU
#options 	I586_CPU
options 	I686_CPU

# CPU-related options.
#options 	MATH_EMULATE	# floating point emulation
#options 	VM86		# virtual 8086 emulation
#options 	USER_LDT	# user-settable LDT; used by WINE
# eliminate delay no-ops in I/O; recommended on all but very old machines
options 	DUMMY_NOPS

# delay between "rebooting ..." message and hardware reset, in milliseconds
options 	CPURESET_DELAY=2000

# Misc. i386-specific options
options 	XSERVER		# X server support in console drivers
#options 	XSERVER_DDB	# PF12 gets you into DDB when X is running

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	"CONSDEVNAME=\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options	CONS_OVERRIDE	# Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options 	REALBASEMEM=639		# size of base memory (in KB)
#options 	REALEXTMEM=15360	# size of extended memory (in KB)

# Standard system options

options 	UCONSOLE	# users can use TIOCCONS (for xconsole)
options 	INSECURE	# disable kernel security levels

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=1024	# 1024 pages is the default

options 	LKM		# loadable kernel modules

# Diagnostic/debugging support options
options 	DIAGNOSTIC	# cheap kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
options 	DDB		# in-kernel debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	KGDB		# remote debugger
#options 	"KGDB_DEVNAME=\"com\"",KGDBADDR=0x3f8,KGDBRATE=9600
#makeoptions	DEBUG="-g"	# compile full symbol table

# Compatibility options
options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
options 	COMPAT_09	# NetBSD 0.9,
options 	COMPAT_10	# NetBSD 1.0,
options 	COMPAT_11	# NetBSD 1.1,
options 	COMPAT_12	# NetBSD 1.2,
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_43	# and 4.3BSD
options 	COMPAT_386BSD_MBRPART # recognize old partition ID

options 	COMPAT_SVR4	# binary compatibility with SVR4
options 	COMPAT_IBCS2	# binary compatibility with SCO and ISC
options 	COMPAT_LINUX	# binary compatibility with Linux
options 	COMPAT_FREEBSD	# binary compatibility with FreeBSD

# Executable format options
options 	EXEC_ELF32	# 32-bit ELF executables (SVR4, Linux)

options LINUX_GCC_SIGNATURE

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system
file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independant support
#options 	NFSSERVER	# Network File System server
options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options 	EISAVERBOSE	# verbose EISA device autoconfig messages
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
#options 	USBVERBOSE	# verbose USB device autoconfig messages

#options 	NFS_BOOT_BOOTP,NFS_BOOT_BOOTPARAM

# wscons options
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"

# Kernel root file system and dump configuration.
config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0 at root

apm0	at mainbus0			# Advanced power management


# Basic Bus Support

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
#pceb*	at pci? dev ? function ?	# PCI-EISA bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
#puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

# EISA bus support
#eisa*	at mainbus?
#eisa*	at pceb?

# ISA bus support
isa*	at mainbus?
#isa*	at pceb?
isa*	at pcib?

# PCMCIA bus support
#pcmcia*	at pcic? controller ? socket ?

# ISA PCMCIA controllers
#pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x4000
#pcic1	at isa? port 0x3e2 iomem 0xd4000 iosiz 0x4000

# PCI PCMCIA controllers
#pcic0	at pci? dev? function ?

# ISA Plug-and-Play bus support
isapnp0	at isa?

# ISA Plug-and-Play PCMCIA controllers
#pcic*	at isapnp?

# Coprocessor Support

# Math Coprocessor support
npx0	at isa? port 0xf0 irq 13	# x86 math coprocessor


# Console Devices

# ISA console.  You can only configure one of these!
#pc0	at isa? port 0x60 irq 1		# pccons generic PC console driver
#vt0	at isa? port 0x60 irq 1		# PCVT console driver

# Keyboard layout configuration for pccons
#options 	FRENCH_KBD
#options 	FINNISH_KBD
#options 	GERMAN_KBD
#options 	NORWEGIAN_KBD

# wscons
pckbc0	at isa?			# pc keyboard controller
pckbd*	at pckbc?		# PC keyboard
# "opms" should not be enabled together with "pms" or "pmsi"
#pms*		at pckbc?		# PS/2 mouse for wsmouse
#pmsi*		at pckbc?	# PS/2 "Intelli"mouse for wsmouse
opms*		at pckbc?		# backwards compatible PS/2 mouse
vga0		at isa?
vga*		at pci?
pcdisplay0	at isa?			# CGA, MDA, EGA, HGA
wsdisplay*	at vga? console ?
wsdisplay*	at pcdisplay? console ?
wskbd*	at pckbd? console ?
#wsmouse*	at pms?
#wsmouse*	at pmsi?

pcppi0	at isa?
sysbeep0	at pcppi?

# Serial Devices

# PCI serial interfaces
#com*	at puc? port ?			# 16x450s on "universal" comm boards
#cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards

# ISA Plug-and-Play serial interfaces
com*	at isapnp?			# Modems and serial boards

# PCMCIA serial interfaces
#com*	at pcmcia? function ?		# Modems and serial cards

#pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
#com*	at pcmcom? slave ?		# ...and the slave devices

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
com1	at isa? port 0x2f8 irq 3
#com2	at isa? port 0x3e8 irq 5
#com3	at isa? port 0x2e8 irq 9
#ast0	at isa? port 0x1a0 irq 5	# AST 4-port serial cards
#com*	at ast? slave ?
#boca0	at isa? port 0x100 irq 5	# BOCA 8-port serial cards
#com*	at boca? slave ?
#tcom0	at isa? port 0x100 irq 7	# TC-800 8-port serial cards
#com*	at tcom? slave ?
#rtfps0	at isa? port 0x1230 irq 10	# RT 4-port serial cards
#com*	at rtfps? slave ?
#cy0	at isa? iomem 0xd4000 irq 12	# Cyclades serial cards


# Parallel Printer Interfaces

# PCI parallel printer interfaces
#lpt*	at puc? port ?			# || ports on "universal" comm boards

# ISA parallel printer interfaces
lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
#lpt1	at isa? port 0x278
#lpt2	at isa? port 0x3bc


# SCSI Controllers and Devices

# PCI SCSI controllers
#adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw*	at pci? dev ? function ?	# AdvanSys 9xxUW SCSI
ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
#bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI
#isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
#ncr*	at pci? dev ? function ?	# NCR 53c8xx SCSI
#pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI

# EISA SCSI controllers
#ahb*	at eisa? slot ?			# Adaptec 174[02] SCSI
#ahc*	at eisa? slot ?			# Adaptec 274x, aic7770 SCSI
#bha*	at eisa? slot ?			# BusLogic 7xx SCSI
#uha*	at eisa? slot ?			# UltraStor 24f SCSI

# PCMCIA SCSI controllers
#aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI

# ISA Plug-and-Play SCSI controllers
#aha*	at isapnp? 			# Adaptec AHA-154[02
#aic*	at isapnp?			# Adaptec AHA-1520B

# ISA SCSI controllers
#aha0	at isa? port 0x330 irq ? drq ?	# Adaptec 154[02] SCSI
#aha1	at isa? port 0x334 irq ? drq ?
#ahc0	at isa? port ? irq ?		# Adaptec 284x SCSI
#aic0	at isa? port 0x340 irq 11	# Adaptec 152[02] SCSI
#bha0	at isa? port 0x330 irq ? drq ?	# BusLogic [457]4X SCSI
#bha1	at isa? port 0x334 irq ? drq ?
#nca0	at isa? port 0x360 irq 15	# Port-mapped NCR 53C80 contoller
#nca1	at isa? iomem 0xd8000 irq 5	# Memory-mapped controller (T128, etc.)
#sea0	at isa? iomem 0xc8000 irq 5	# Seagate/Future Domain SCSI
#uha0	at isa? port 0x330 irq ? drq ?	# UltraStor [13]4f SCSI
#uha1	at isa? port 0x340 irq ? drq ?
#wds0	at isa? port 0x350 irq 15 drq 6	# WD7000 and TMC-7000 controllers
#wds1	at isa? port 0x358 irq 11 drq 5

# SCSI bus support
#scsibus* at adv?
#scsibus* at adw?
#scsibus* at aha?
#scsibus* at ahb?
scsibus* at ahc?
#scsibus* at aic?
#scsibus* at bha?
#scsibus* at isp?
#scsibus* at nca?
#scsibus* at ncr?
#scsibus* at pcscp?
#scsibus* at sea?
#scsibus* at uha?
#scsibus* at wds?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
ch*	at scsibus? target ? lun ?	# SCSI autochangers
#ss*	at scsibus? target ? lun ?	# SCSI scanners
uk*	at scsibus? target ? lun ?	# SCSI unknown


# IDE and Related Devices
# PCI IDE controllers - see pciide(4) for suppored hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci ? dev ? function ? flags 0x0000

# ISA Plug-and-Play IDE controllers
#wdc*	at isapnp? 

# PCMCIA IDE controllers
#wdc*	at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
#wdc0	at isa? port 0x1f0 irq 14
#wdc1	at isa? port 0x170 irq 15

# IDE drives.
# Flags are used only with controlers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The first 4 bytes of the flags define the PIO mode to use, the
# second DMA mode and the third UltraDMA mode. For each group of 4 bytes,
# the 3 lower define the mode to use, and the last one must be 1 for the
# setting to be used. For DMA and UDMA, 0xf means 'disable'.
# 0x0fac means 'use PIO mode 4 DMA mode 2, disable UltraDMA'.
# 0x0000 means "use whatever the drive claims to support.
#wd*	at wdc? channel ? drive ? flags 0x0000
wd*	at pciide? channel ? drive ? flags 0x0000

# ATAPI bus support
#atapibus* at wdc? channel ?
#atapibus* at pciide? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
#cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
#sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
#uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?			# the drives themselves
# some machines need you to do this instead of fd*
#fd0	at fdc0 drive 0

# ISA CD-ROM devices
#mcd0	at isa? port 0x300 irq 10	# Mitsumi CD-ROM drives

# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0	at isa? port 0x308 irq 5 drq 1	# Archive and Wangtek QIC tape drives


# Network Interfaces

# PCI network interfaces
#de*	at pci? dev ? function ?	# DEC 21x4x-based Ethernet
#en*	at pci? dev ? function ?	# ENI/Adaptec ATM
#ep*	at pci? dev ? function ?	# 3Com 3c59x
#ex*	at pci? dev ? function ?	# 3Com 90x[B]
#epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
#esh*	at pci? dev ? function ?	# Essential HIPPI card
#fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI
#fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
#le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
#tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
#vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet

# EISA network interfaces
#ep*	at eisa? slot ?			# 3Com 3c579 Ethernet
#fea*	at eisa? slot ?			# DEC DEFEA FDDI

# ISA Plug-and-Play network interfaces
#ep*	at isapnp?			# 3Com 3c509 Ethernet
#ne*	at isapnp?			# NE2000-compatible Ethernet

# PCMCIA network interfaces
#ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
#mbe*	at pcmcia? function ?		# MB8696x based Ethernet
#ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
#sm*	at pcmcia? function ?		# Megahertz Ethernet

# ISA network interfaces
#ate0	at isa? port 0x2a0 irq ?		# AT1700
#cs0	at isa? port 0x300 iomem ? irq ? drq ?	# CS8900 Ethernet
#ec0	at isa? port 0x250 iomem 0xd8000 irq 9	# 3Com 3c503 Ethernet
#eg0	at isa? port 0x280 irq 9		# 3C505 ethernet cards
#el0	at isa? port 0x300 irq 9		# 3C501 ethernet cards
#ep0	at isa? port ? irq ?			# 3C509 ethernet cards
#ef0	at isa? port 0x360 iomem 0xd0000 irq 7	# 3C507
#ai0	at isa? port 0x360 iomem 0xd0000 irq 7	# StarLAN
#fmv0	at isa? port 0x2a0 irq ?		# FMV-180 series
#ix0	at isa? port 0x300 irq 10		# EtherExpress/16
#iy0	at isa? port 0x360 irq ?		# EtherExpress PRO 10 ISA
#lc0	at isa? port 0x320 iomem ? irq ?	# DEC EtherWORKS III (LEMAC)
#depca0	at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5	# DEPCA
#le*	at depca?
#nele0	at isa? port 0x320 irq 9 drq 7		# NE2100
#le*	at nele?
#bicc0	at isa? port 0x320 irq 10 drq 7		# BICC IsoLan
#le*	at bicc?
#ne0	at isa? port 0x280 irq 9		# NE[12]000 ethernet cards
#ne1	at isa? port 0x300 irq 10
#sm0	at isa? port 0x300 irq 10		# SMC91C9x Ethernet
#we0	at isa? port 0x280 iomem 0xd0000 irq 9	# WD/SMC Ethernet
#we1	at isa? port 0x300 iomem 0xcc000 irq 10

# MII/PHY support
#exphy*	at mii? phy ?			# 3Com internal PHYs
#icsphy*	at mii? phy ?		# Integrated Circuit Systems ICS1890
#inphy*	at mii? phy ?			# Intel 82555 PHYs
#lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
#nsphy*	at mii? phy ?			# NS83840 PHYs
#qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
#sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
#tlphy*	at mii? phy ?			# ThunderLAN PHYs
#ukphy*	at mii? phy ?			# generic unknown PHYs

# USB Controller and Devices

# PCI USB controllers
#uhci*	at pci?				# Universal Host Controller (Intel)
#ohci*	at pci?				# Open Host Controller

# USB bus support
#usb*	at uhci?
#usb*	at ohci?

# USB Hubs
#uhub*	at usb?
#uhub*	at uhub? port ? configuration ? interface ?

# USB Mice
#ums*	at uhub? port ? configuration ? interface ?
#wsmouse*	at ums?

# USB Keyboards
#ukbd*	at uhub? port ? configuration ? interface ?
#wskbd*	at ukbd? console ?

# USB Generic HID devices
#uhid*	at uhub? port ? configuration ? interface ?

# USB Printer
#ulpt*	at uhub? port ? configuration ? interface ?

# USB Generic driver
#ugen*	at uhub? port ? configuration ? interface ?

# Audio Devices

# PCI audio devices
#eap*	at pci? dev ? function ?	# Ensoniq AudioPCI
#sv*	at pci? dev ? function ?	# S3 SonicVibes

# ISA Plug-and-Play audio devices
#ess*	at isapnp?			# ESS Tech ES1887, ES1888, ES888 audio
#guspnp*	at isapnp?			# Gravis Ultra Sound PnP audio
sb*	at isapnp?			# SoundBlaster-compatible audio
#wss*	at isapnp?			# Windows Sound System
#ym*	at isapnp?			# Yamaha OPL3-SA3 audio

# ISA audio devices
#aria0	at isa? port 0x290 irq 10 		# Aria
#gus0	at isa? port 0x220 irq 7 drq 1 drq2 6	# Gravis Ultra Sound
#pas0	at isa? port 0x220 irq 7 drq 1		# ProAudio Spectrum
#pss0	at isa? port 0x220 irq 7 drq 6  	# Personal Sound System
#sp0	at pss0 port 0x530 irq 10 drq 0		# 	sound port driver
sb0	at isa? port 0x220 irq 5 drq 1 drq2 5	# SoundBlaster
#wss0	at isa? port 0x530 irq 10 drq 0	drq2 1	# Windows Sound System

# OPL[23] FM syntheziers
#opl0	at isa? port 0x388	# use only if not attached to sound card
#opl*	at ess?
opl*	at sb?
#opl*	at sv?

# USB Audio devices
#uaudio*	at uhub? port ? configuration ? interface ?

# Audio support
#audio*	at aria?
#audio*	at eap?
#audio*	at ess?
#audio*	at gus?
#audio*	at guspnp?
#audio*	at pas?
audio*	at sb?
#audio*	at sp?
#audio*	at sv?
#audio*	at uaudio?
#audio*	at wss?
#audio*	at ym?

# MIDI support
midi*	at pcppi?		# MIDI interface to the PC speaker
midi*	at sb?			# SB MPU401 port
midi*	at opl?			# OPL FM synth

# The spkr driver provides a simple tone interface to the built in speaker.
spkr0	at pcppi?		# PC speaker


# Mice

# ISA busmice
#lms0	at isa? port 0x23c irq 5	# Logitech bus mouse
#lms1	at isa? port 0x238 irq 5
#mms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
#mms1	at isa? port 0x238 irq 5
#wsmouse*	at lms?
#wsmouse*	at mms?
# backwards compatible versions
olms0	at isa? port 0x23c irq 5	# Logitech bus mouse
olms1	at isa? port 0x238 irq 5
omms0	at isa? port 0x23c irq 5	# Microsoft InPort mouse
omms1	at isa? port 0x238 irq 5
#opms0	at pc? irq 12		# PS/2 auxiliary port mouse
#opms0	at vt? irq 12		# PS/2 auxiliary port mouse


# Joysticks

# ISA Plug-and-Play joysticks
joy*	at isapnp?			# Game ports (usually on audio cards)

# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0	at isa? port 0x201


# Miscellaneous Devices

# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1


# Pull in optional local configuration
include	"arch/i386/conf/GENERIC.local"


# Pseudo-Devices

# disk/mass storage pseudo-devices
pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	raid		4	# RAIDframe disk driver
pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
#pseudo-device	bpfilter	8	# Berkeley packet filter
#pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
#pseudo-device	sl		2	# Serial Line IP
#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
#pseudo-device	tun		2	# network tunneling over tty
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	ipip		2	# IP Encapsulation within IP (RFC 2003)

# miscellaneous pseudo-devices
pseudo-device	pty		64	# pseudo-terminals
pseudo-device	tb		1	# tablet line discipline
pseudo-device	sequencer	1	# MIDI sequencer

# rnd is EXPERIMENTAL at this point.
#pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)

# a pseudo device needed for Coda	# also needs CODA (above)
pseudo-device	vcoda		4	# coda minicache <-> venus comm.

	
>Fix:
... if I only knew a fix...
	
>Audit-Trail:
>Unformatted: