Subject: Re: NetBSD 2.0 test drive at HP site
To: Geert Hendrickx <ghen@telenet.be>
From: Hubert Feyrer <hubert@feyrer.de>
List: netbsd-advocacy
Date: 02/05/2005 14:01:06
On Sat, 5 Feb 2005, Geert Hendrickx wrote:
> Confirmed:

I'll take the liberty to append a bit more information, as it's not only 
interesting to see the two CPUs used, but also the onboard RAID 
controller:

$ /sbin/dmesg
NetBSD 2.0 (GENERIC.MP) #0: Wed Dec  1 11:06:48 UTC 2004
         builds@build:/big/builds/ab/netbsd-2-0-RELEASE/i386/200411300000Z-obj/big/builds/ab/netbsd-2-0-RELEASE/src/sys/arch/i386/compile/GENERIC.MP
total memory = 2047 MB
avail memory = 1996 MB
BIOS32 rev. 0 found at 0xf0000
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (COMPAQ   PROLIANT    )
cpu0 at mainbus0: apid 3 (boot processor)
cpu0: Intel Pentium III (686-class), 1263.53 MHz, id 0x6b1
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium III (686-class), 1263.44 MHz, id 0x6b1
cpu1: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu1: features 383fbff<FXSR,SSE>
cpu1: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu1: L2 cache 512 KB 32B/line 8-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 0 is type PCI 
mpbios: bus 3 is type PCI 
mpbios: bus 9 is type ISA 
ioapic0 at mainbus0 apid 8 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 35 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 8
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pci1 at pchb1 bus 3
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
fxp0 at pci1 dev 4 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at ioapic0 pin 17 (irq 5)
fxp0: Ethernet address 00:02:a5:8b:d2:9b
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci1 dev 5 function 0: i82559 Ethernet, rev 8
fxp1: interrupting at ioapic0 pin 24 (irq 7)
fxp1: Ethernet address 00:02:a5:8b:d2:9a
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cac0 at pci0 dev 1 function 0: Compaq Integrated Array
cac0: interrupting at ioapic0 pin 19 (irq 3)
ld0 at cac0 unit 0: standalone disk or RAID0 array
ld0: 34719 MB, 8817 cyl, 128 head, 63 sec, 512 bytes/sect x 71106240 sectors
vga1 at pci0 dev 3 function 0: ATI Technologies 3D Rage IIC (rev. 0x7a)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Compaq product 0xa0f0 (miscellaneous system) at pci0 dev 4 function 0 not configured
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 ISA bridge (rev. 0x51)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at rccide0 channel 1
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 9.0C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0 
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-224E, , 9.0C> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(rccide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: ld0 
root on ld0a dumps on ld0b
root file system type: ffs
cpu1: CPU 0 running 
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Accounting started
$ 
$ 
$ df -m
Filesystem    1M-blocks     Used     Avail Capacity  Mounted on
/dev/ld0a           996       36       910     3%    /
/dev/ld0f           496       63       407    13%    /var
/dev/ld0e          3972      355      3418     9%    /usr
/dev/ld0g         26203     5051     19842    20%    /tmp
spe253:/house    156227    50833    101051    33%    /house
$
$
$ /sbin/sysctl hw.ncpu
hw.ncpu = 2
$ 
$ 
$ top
load averages:  0.46,  0.21,  0.12                                     07:55:02
30 processes:  28 sleeping, 2 on processor
CPU0 states:  0.0% user,  0.0% nice,  0.0% system,  0.0% interrupt,  100% idle
CPU1 states:  100% user,  0.0% nice,  0.0% system,  0.0% interrupt,  0.0% idle
Memory: 19M Act, 548K Wired, 2552K Exec, 14M File, 1957M Free
Swap: 2048M Total, 2048M Free

   PID USERNAME PRI NICE   SIZE   RES STATE      TIME   WCPU    CPU COMMAND
  1819 hubertf   53    0   128K  580K CPU/0      0:21 97.50% 65.09% sh
  1804 hubertf   18    0   220K  756K pause/3    0:09  8.79%  8.79% ksh
     9 root      18    0     0K   40M syncer/3   0:07  0.00%  0.00% [ioflush]
  1590 hubertf   28    0   264K 1040K CPU/3      0:00  0.00%  0.00% top
  1663 hubertf   18    0   196K  796K pause/0    0:00  0.00%  0.00% csh
     2 root      14    0     0K   40M crypto/3   0:00  0.00%  0.00% [cryptoret]
   369 root      10    0     0K   40M nfsidl/0   0:00  0.00%  0.00% [nfsio]
   213 root      10    0     0K   40M nfsidl/3   0:00  0.00%  0.00% [nfsio]
   349 root      10    0     0K   40M nfsidl/0   0:00  0.00%  0.00% [nfsio]
   344 root      10    0     0K   40M nfsidl/3   0:00  0.00%  0.00% [nfsio]
     5 root      10    0     0K   40M pmsres/3   0:00  0.00%  0.00% [pms0]
   653 root      10    0   220K  724K nanosl/3   0:00  0.00%  0.00% cron
     1 root      10    0    60K  720K wait/3     0:00  0.00%  0.00% init
   671 root       3    0   196K  824K ttyin/3    0:00  0.00%  0.00% csh
   666 root       3    0    48K  700K ttyin/3    0:00  0.00%  0.00% getty
   624 root       3    0    48K  700K ttyin/3    0:00  0.00%  0.00% getty

-- 
NetBSD - Free AND Open!      (And of course secure, portable, yadda yadda)