Subject: Re: HEADS UP: jmcneill-pm branch merged
To: Jared D. McNeill <jmcneill@invisible.ca>
From: M Graff <explorer@flame.org>
List: current-users
Date: 12/11/2007 22:45:38
This is a multi-part message in MIME format.
--------------090001030200050606050604
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Jared D. McNeill wrote:

> Do you have any debug information on the crash at all? I have a funny
> feeling that it may be the DMI parser, it seems to have issues with
> buggy firmware.

Unfortunately, no.  It crashes nearly immediately on startup, and for
some reason is not dropping me into ddb.  It should be doing so, but it
seems to just reset the machine.

I've attached a dmesg output if that helps.  I can test any patches you
want to throw my way as well, fairly quickly since the ice storm seems
to have calmed down.  Power is good.

- --Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.7 (MingW32)

iD8DBQFHX2dxuzMQWQwZDN0RAo5oAJ9zdmzcSKpkLFpcl+B0OkN4KNTprACgm5R8
qV/RozgsFDjkwCa+yiGZW68=
=eVK8
-----END PGP SIGNATURE-----

--------------090001030200050606050604
Content-Type: text/plain;
 name="dmesg.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.txt"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.41 (GENERIC.MP) #0: Mon Dec 10 02:06:39 UTC 2007
	explorer@speedy.home.flame.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 2047 MB
avail memory = 1998 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6c0
SMBIOS rev. 2.3 @ 0xf08e0 (30 entries)
TYAN PAULANER (X2.0)
mainbus0 (root)
cpu0 at mainbus0 apid 1: (boot processor)
cpu0: AMD Athlon MP 2000+ (686-class), 1666.85 MHz, id 0x662
cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "AMD Athlon(tm) MP 2000+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: AMD Power Management features: 1<TS>
cpu0: calibrating local timer
cpu0: apic clock running at 266 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 0: (application processor)
cpu1: AMD Athlon MP 2000+ (686-class), 1666.88 MHz, id 0x662
cpu1: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu1: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu1: "AMD Athlon(tm) Processor"
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 256 KB 64B/line 16-way
cpu1: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu1: AMD Power Management features: 1<TS>
ioapic0 at mainbus0 apid 2: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20070320
mpacpi: could not get bus number, assuming bus 0
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
acpi0: fixed-feature sleep button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
acpibut0 at acpi0 (PWRB, PNP0C0C): ACPI Power Button
MEM (PNP0C01) [System Board] at acpi0 not configured
PCI0 (PNP0A03) [PCI/PCI-X Host Bridge] at acpi0 not configured
LNKA (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKB (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKC (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
LNKD (PNP0C0F) [PCI interrupt link device] at acpi0 not configured
PIC (PNP0000) [AT Interrupt Controller] at acpi0 not configured
DMA1 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
SYSR (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not configured
pckbc1 at acpi0 (PS2M, PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PS2K, PNP0303): kbd port
pckbc2: io 0x60,0x64 irq 1
SIO (PNP0A05) [Generic Container Device] at acpi0 not configured
COM1 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
COM2 (PNP0501) [16550A-compatible COM port] at acpi0 not configured
LPT (PNP0400) [Standard LPT printer port] at acpi0 not configured
FDC0 (PNP0700) [PC standard floppy disk controller] at acpi0 not configured
apm0 at acpi0: Power Management spec V1.2
pcppi1: attached to attimer1
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD762 Northbridge (rev. 0x11)
agp0 at pchb0: aperture at 0xe8000000, size 0x8000000
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD762 AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 5 function 0: Number 9 Computer Company product 0x5348 (rev. 0x02)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga1 unsupported
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD768 PCI-ISA/LPC Bridge (rev. 0x05)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD768 IDE Controller (rev. 0x04)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
amdpm0 at pci0 dev 7 function 3: Advanced Micro Devices AMD768 Power Management Controller (rev. 0x03)
timecounter: Timecounter "amdpm0" frequency 3579545 Hz quality 1000
amdpm0: 24-bit timer
amdpm0: random number generator enabled (apprx. 61ms)
pdcsata0 at pci0 dev 9 function 0
pdcsata0: Promise PDC20375 SATA150 controller (rev. 0x02)
pdcsata0: interrupting at ioapic0 pin 21 (irq 9)
pdcsata0: bus-master DMA support present
atabus2 at pdcsata0 channel 0
atabus3 at pdcsata0 channel 1
atabus4 at pdcsata0 channel 2
ppb1 at pci0 dev 16 function 0: Advanced Micro Devices AMD768 PCI-PCI Bridge (rev. 0x05)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ohci0 at pci2 dev 0 function 0: Advanced Micro Devices AMD768 USB Controller (rev. 0x07)
ohci0: interrupting at ioapic0 pin 19 (irq 10)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
emuxki0 at pci2 dev 4 function 0: Creative Labs SBLive! EMU 10000 (audio multimedia, revision 0x08)
emuxki0: interrupting at ioapic0 pin 16 (irq 5)
emuxki0: ac97: TriTech TR28602 codec; no 3D stereo
audio0 at emuxki0: full duplex, mmap, independent
joy0 at pci2 dev 4 function 1: Creative Labs PCI Gameport Joystick (rev 0x08)
joy0: joystick not connected
3D Labs GLINT Permedia 3 (VGA display, revision 0x01) at pci2 dev 6 function 0 not configured
ex0 at pci2 dev 8 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x78)
ex0: interrupting at ioapic0 pin 19 (irq 10)
ex0: MAC address 00:e0:81:22:d1:f1
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex0: WARNING: powerhook_establish is deprecated
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: WARNING: powerhook_establish is deprecated
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
com1: WARNING: powerhook_establish is deprecated
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
pdcsata0 port 1: device present, speed: 1.5Gb/s
wd0 at atabus0 drive 0: <HDS722525VLAT80>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 232 GB, 484518 cyl, 16 head, 63 sec, 512 bytes/sect x 488395055 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Pioneer DVD-ROM ATAPIModel DVD-106S 012, , E1.22> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1 at atabus3 drive 0Kernelized RAIDframe activated
pad0: outputs: 44100Hz, 16-bit, stereo
audio1 at pad0: half duplex
pdcsata0:1:0: lost interrupt
	type: ata tc_bcount: 512 tc_skip: 0
: <ST3120023AS>
wd1: quirks 1<SPLIT_MOD15_WRITE>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1(pdcsata0:1:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--------------090001030200050606050604--