Hi,

after installing a current kernel (ca. 1 hour old) the machine
only boots to multiuser when I disable nfsd (?!) and trying to
reboot the beast I get the following:
The system seem to hang in "unmounting file systems...", so
I broke to db and typed "reboot".
The "Devices without power..." is spit out and then nothing
happens for a minute or two until the rest shows up...
What's on with this? A kernel from last Friday works flawlessly
on this machine...

Kurt


Mon Dec 10 13:56:27 MET 2007

NetBSD/amd64 (isunopti) (console)

login: Dec 10 14:31:34 shutdown: reboot by ks: 
Dec 10 14:31:34 isunopti shutdown: reboot by ks: 
Dec 10 14:31:41 isunopti syslogd: Exiting on signal 15
syncing disks... 2 done
unmounting file systems...
Stopped in pid 0.5 (system) at  netbsd:breakpoint+0x1:  ret
db{0}> ps
 PID           PPID     PGRP        UID S   FLAGS LWPS          COMMAND    WAIT
 13743            1    13743          0 4  0x4000    1           reboot
 1                0        1          0 4  0x4001    1             init    wait
>0               -1        0          0 2 0x20002   43           system       *
db{0}> reboot
Devices without power management support: com2 com3 hpet0 viaide0 amdpm0 aapic0 aapic1 pcppi0 ahd0 ahd1
ahd0: board is not responding
cmd fail
ahd0: ahd_timeout
ahd0:SCB 0x12 - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahd0: Dumping Card State at program address 0x27 Mode 0x11
Card was paused
HS_MAILBOX[0x0] INTCTL[0x0] SEQINTSTAT[0x0] SAVED_MODE[0x11] 
DFFSTAT[0x30] SCSISIGI[0x0] SCSIPHASE[0x0] SCSIBUS[0x0] 
LASTPHASE[0x1] SCSISEQ0[0x0] SCSISEQ1[0x0] SEQCTL0[0xa0] 
SEQINTCTL[0x0] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] SSTAT0[0x0] 
SSTAT1[0x8] SSTAT2[0x0] SSTAT3[0x0] PERRDIAG[0x0] 
SIMODE1[0x0] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0] 
LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0x0] 

SCB Count = 48 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x0 NEXTSCB 0x0
qinstart = 0x0 qinfifonext = 0xf60
panic: Loop 1

Stopped in pid 0.5 (system) at  netbsd:breakpoint+0x1:  ret
db{0}> 
Devices without power management support: com2 com3 hpet0 viaide0 amdpm0 aapic0 aapic1 pcppi0 ahd0 ahd1
bge0: block failed to stop: reg 0x3400, bit 0x00000002
bge0: block failed to stop: reg 0x2400, bit 0x00000002