--pgp-sign-Multipart_Fri_Oct__5_18:05:22_2007-1
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

Here's the output of a boot of a recent -current kernel on an IBM x336.

Note the noise about ichsmb0 device, and iic0 too.


>> NetBSD/i386 BIOS Boot, Revision 3.3
>> (woods@once, Sun Sep  2 19:02:05 EDT 2007)
>> Memory: 629/151026688 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in ... interrupted!
type "?" or "help" for help.
> boot /netbsd-4.99.31-GENERIC.MP-20071005.0 -s=20
booting hd0a:/netbsd-4.99.31-GENERIC.MP-20071005.0 (howto 0x2)
11246372+437188+364280 [572976+513517]=3D0xc88258
WARNING: skipping large memory map entry: 0x100000000/0x30000000/0x1
BIOS CFG: Model-SubM-Rev: fc-01-0c, 0x5874<EBDA,KBDINT,RTC,IC2,CPUF,MMF,KBD=
F>
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.31 (GENERIC.MP) #0: Fri Oct  5 16:01:22 EDT 2007
        woods@once:/build/woods/once/current-i386-i386-ppro-obj/building/wo=
rk/woods/m-NetBSD-current/sys/arch/i386/compile/GENERIC.MP
total memory =3D 3327 MB
rbus: rbus_min_start set to 0xc0000000
avail memory =3D 3249 MB
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Intel (686-class), 3000.40 MHz, id 0xf43
cpu0: "Intel(R) Xeon(TM) CPU 3.00GHz"
cpu1 at mainbus0 apid 6: (application processor)
cpu1: Intel (686-class), 3000.12 MHz, id 0xf43
cpu1: "Intel(R) Xeon(TM) CPU 3.00GHz"
cpu2 at mainbus0 apid 1: (application processor)
cpu2: Intel (686-class), 3000.11 MHz, id 0xf43
cpu2: "Intel(R) Xeon(TM) CPU 3.00GHz"
cpu3 at mainbus0 apid 7: (application processor)
cpu3: Intel (686-class), 3000.12 MHz, id 0xf43
cpu3: "Intel(R) Xeon(TM) CPU 3.00GHz"
ioapic0 at mainbus0 apid 14
ioapic1 at mainbus0 apid 13
ioapic2 at mainbus0 apid 12
acpi0 at mainbus0: Advanced Configuration and Power Interface
ACPI-Fast 24-bit timer
CPU3 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU2 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU1 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
CPU0 (ACPI Object Type 'Processor' [0x0c]) at acpi0 not configured
PCI0 (PNP0A08) [PCI Express/PCI-X Mode-2 Host Bridge] at acpi0 not configur=
ed
SIOM (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not =
configured
pckbc1 at acpi0 (PS2K, PNP0303): kbd port
pckbc1: io 0x64,0x60 irq 1
pckbc2 at acpi0 (PS2M, PNP0F13): aux port
pckbc2: irq 12
com3 at acpi0 (COM2, PNP0501-2)
com3: io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com3: console
PIC1 (PNP0000) [AT Interrupt Controller] at acpi0 not configured
PIC2 (PNP0003) [APIC] at acpi0 not configured
PIC3 (PNP0003) [APIC] at acpi0 not configured
PIC4 (PNP0003) [APIC] at acpi0 not configured
DMA0 (PNP0200) [AT DMA Controller] at acpi0 not configured
attimer1 at acpi0 (TMR, PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
RTC (PNP0B00) [AT Real-Time Clock] at acpi0 not configured
pcppi1 at acpi0 (SPKR, PNP0800)
pcppi1: io 0x61
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (COPR, PNP0C04)
npx1: io 0xf0-0xff irq 13
SBD1 (PNP0C02) [Plug and Play motherboard register resources] at acpi0 not =
configured
apm0 at acpi0: Power Management spec V1.2
pckbc: cmd word write error
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel E7525 Memory Controller Hub (rev. 0x0c)
Intel E7525 Error Reporting Device (undefined subclass 0x00, revision 0x0c)=
 at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: Intel E7525 PCI Express Port A (rev. 0x0c)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 4 function 0: Intel E7525 PCI Express Port B (rev. 0x0c)
pci2 at ppb1 bus 3
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
ppb2 at pci2 dev 0 function 0: Intel 6700PXH PCI Express-to-PCI Bridge #0 (=
rev. 0x09)
pci3 at ppb2 bus 4
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
mpt0 at pci3 dev 1 function 0: Symbios Logic 53c1030
mpt0: interrupting at ioapic1 pin 4 (irq 11)
scsibus0 at mpt0: 16 targets, 8 luns per target
ppb3 at pci2 dev 0 function 2: Intel 6700PXH PCI Express-to-PCI Bridge #1 (=
rev. 0x09)
pci4 at ppb3 bus 5
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
ppb4 at pci4 dev 1 function 0: IBM 133 PCI-X Bridge (rev. 0x02)
pci5 at ppb4 bus 6
pci5: i/o space, memory space enabled, rd/line, wr/inv ok
wm0 at pci5 dev 4 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm0: interrupting at ioapic2 pin 0 (irq 11)
wm0: Ethernet address 00:04:23:b2:91:f0
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
wm1 at pci5 dev 4 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm1: interrupting at ioapic2 pin 1 (irq 11)
wm1: Ethernet address 00:04:23:b2:91:f1
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
wm2 at pci5 dev 6 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm2: interrupting at ioapic2 pin 2 (irq 3)
wm2: Ethernet address 00:04:23:b2:91:f2
makphy2 at wm2 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
wm3 at pci5 dev 6 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm3: interrupting at ioapic2 pin 3 (irq 3)
wm3: Ethernet address 00:04:23:b2:91:f3
makphy3 at wm3 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
ppb5 at pci0 dev 6 function 0: Intel product 0x3599 (rev. 0x0c)
pci6 at ppb5 bus 7
pci6: i/o space, memory space enabled, rd/line, wr/inv ok
bge0 at pci6 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge0: interrupting at ioapic0 pin 16 (irq 11)
bge0: ASIC BCM5751 A1 (0x4101), Ethernet address 00:14:5e:33:69:ca
brgphy0 at bge0 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
ppb6 at pci0 dev 7 function 0: Intel product 0x359a (rev. 0x0c)
pci7 at ppb6 bus 8
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
bge1 at pci7 dev 0 function 0: Broadcom BCM5721 Gigabit Ethernet
bge1: interrupting at ioapic0 pin 16 (irq 11)
bge1: ASIC BCM5751 A1 (0x4101), Ethernet address 00:14:5e:33:69:cb
brgphy1 at bge1 phy 1: BCM5750 1000BASE-T media interface, rev. 0
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000bas=
eT-FDX, auto
Intel product 0x359b (miscellaneous system, revision 0x0c) at pci0 dev 8 fu=
nction 0 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller (rev.=
 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller (rev.=
 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 3)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller (rev.=
 0x02)
ehci0: interrupting at ioapic0 pin 23 (irq 3)
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
ppb7 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
pci8 at ppb7 bus 1
pci8: i/o space, memory space enabled
vga1 at pci8 dev 1 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x0=
0)
wsdisplay0 at vga1 kbdmux 1
direct rendering for vga1 unsupported
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 82801EB Serial ATA Controller (rev. 0x02)
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
ichsmb0 at pci0 dev 31 function 3: Intel 82801EB/ER SMBus Controller (rev. =
0x02)
ichsmb0: interrupting at ioapic0 pin 17 (irq 11)
iic0 at ichsmb0: I2C bus
ichsmb0: exec: op 1, addr 0x10, cmdlen 1, len 1, flags 0x08: timeout, statu=
s 0x41<BUSY,INUSE>
ichsmb0: abort failed, status 0x41<BUSY,INUSE>
iic0: no devices found
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
Too many symbols for tree, skipping 1363 symbols
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4246N, , 0Y03> cdrom=
 removable
sd0 at scsibus0 target 0 lun 0: <IBM-ESXS, MAX3073NC     FN, CA06> disk fix=
ed
sd0: 70006 MB, 49158 cyl, 4 head, 729 sec, 512 bytes/sect x 143374000 secto=
rs
sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queue=
ing
sd1 at scsibus0 target 1 lun 0: <IBM-ESXS, MAX3073NC     FN, CA06> disk fix=
ed
sd1: 70006 MB, 49158 cyl, 4 head, 729 sec, 512 bytes/sect x 143374000 secto=
rs
sd1: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queue=
ing
ses0 at scsibus0 target 8 lun 0: <IBM, 25P3495a S320  1, 1> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
RAIDframe: NOTICE: no RAID sets found, no root RAID possible...
boot device: sd0
root on sd0a dumps on sd0b
root file system type: ffs
init: starting single user mode...
#=20


--=20
						Greg A. Woods

H:+1 416 218-0098 W:+1 416 489-5852 x122 VE3TCP RoboHack <woods@robohack.ca>
Planix, Inc. <woods@planix.com>       Secrets of the Weird <woods@weird.com>

--pgp-sign-Multipart_Fri_Oct__5_18:05:22_2007-1
Content-Type: application/pgp-signature
Content-Transfer-Encoding: 7bit

-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0i for non-commercial use
MessageID: oDqw8jS2+s5bK0sBoBf4B1ZZnf8RphxD

iQA/AwUBRwa1I2Z9cbd4v/R/EQKaEACggcIwU7Ti6Z7sDabuns7WfzZ2R/UAoOH+
wshh372aRJqp30GeW8TdoEO5
=VuZR
-----END PGP SIGNATURE-----

--pgp-sign-Multipart_Fri_Oct__5_18:05:22_2007-1--