Just wanted to report devpm success on my laptop:


# vpddecode 2.8
BIOS Build ID: IGET30WW 
Product Name: Thinkpad 380Z
Machine Type/Model: 2635JBU


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.26 (GENERIC) #47: Mon Aug  6 21:01:31 EDT 2007
	jmcneill@silver.invisible.ca:/export/home/jmcneill/branches/jmcneill-pm/src/sys/arch/i386/compile/GENERIC
total memory = 97724 KB
rbus: rbus_min_start set to 0x20000000
avail memory = 84980 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd820
Generic PC
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 298.44 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
cpu0: generic device class power management enabled
cpu0: supported states: D0 D3
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <IBM   ,TP380Z  ,00000001>, AslId <    ,00000000>
acpi0: generic device class power management enabled
acpi0: supported states: D0 D3
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: could not get bus number, assuming bus 0
acpi_pci_link: WARNING: powerhook_establish is deprecated; please see devpm(4)
LNKD: ACPI: Found matching pin for 0.6.INTD at func 2: 11
acpi_pci_link: WARNING: powerhook_establish is deprecated; please see devpm(4)
LNKA: ACPI: Found matching pin for 0.2.INTA at func 0: 11
acpi_pci_link: WARNING: powerhook_establish is deprecated; please see devpm(4)
LNKB: ACPI: Found matching pin for 0.2.INTB at func 1: 11
LNKA: ACPI: Found matching pin for 0.3.INTA at func 0: 11
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpilid0: generic device class power management enabled
acpilid0: supported states: D0 D3
acpibut0 at acpi0 (PNP0C0E): ACPI Sleep Button
acpibut0: generic device class power management enabled
acpibut0: supported states: D0 D3
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
com3 at acpi0 (PNP0501)
com3: io 0x3f8-0x3ff irq 4
com3: ns16550a, working fifo
com3: WARNING: powerhook_establish is deprecated; please see devpm(4)
com3: WARNING: power management not supported
lpt3 at acpi0 (PNP0400)
lpt3: io 0x3bc-0x3bf irq 7
lpt3: WARNING: power management not supported
CSC0010 at acpi0 not configured
wss1 at acpi0 (CSC0000): NeoMagic 256AV audio
wss1: io 0x530-0x537,0x388-0x38b,0x220-0x233 irq 5 drq 1,0
wss1: CS4237B
audio0 at wss1: full duplex, mmap
audio0: audio device class power management enabled
audio0: supported states: D0 D3
opl0 at wss1: model OPL3
midi0 at opl0: WSS Yamaha OPL3 (CPU-intensive output)
midi0: WARNING: power management not supported
opl0: WARNING: power management not supported
wss1: WARNING: power management not supported
CSC0003 at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
attimer1: generic device class power management enabled
attimer1: supported states: D0 D3
PNP0200 [AT DMA Controller] at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
midi1 at pcppi1: PC speaker (CPU-intensive output)
midi1: WARNING: power management not supported
sysbeep0 at pcppi1
sysbeep0: WARNING: power management not supported
pcppi1: WARNING: power management not supported
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: reported by CPUID; using exception 16
npx1: generic device class power management enabled
npx1: supported states: D0 D3
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc1: generic device class power management enabled
pckbc1: supported states: D0 D3
pckbc2 at acpi0 (IBM3781): aux port
pckbc2: irq 12
pckbc2: generic device class power management enabled
pckbc2: supported states: D0 D3
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpiec0: generic device class power management enabled
acpiec0: supported states: D0 D3
acpibat0 at acpi0 (PNP0C0A-0): ACPI Battery (Control Method)
acpibat0: generic device class power management enabled
acpibat0: supported states: D0 D3
acpiacad0 at acpi0 (ACPI0003-0): ACPI AC Adapter
acpiacad0: generic device class power management enabled
acpiacad0: supported states: D0 D3
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
PNP0C0B [ACPI Fan] at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: active cooling level 0: 90.0C
acpitz0: active cooling level 1: 89.0C
acpitz0: critical 98.0C passive 93.5C
acpitz0: generic device class power management enabled
acpitz0: supported states: D0 D3
acpitz1 at acpi0: ACPI Thermal Zone
acpitz1: critical 58.0C
acpitz1: generic device class power management enabled
acpitz1: supported states: D0 D3
acpitz2 at acpi0: ACPI Thermal Zone
acpitz2: critical 60.0C
acpitz2: generic device class power management enabled
acpitz2: supported states: D0 D3
apm0 at acpi0: Power Management spec V1.2
acpibat0: battery info: IBM Corporation , LION, ThinkPad Battery 
acpiacad0: AC adapter online.
apm0: generic device class power management enabled
apm0: supported states: D0 D3
pcppi1: attached to attimer1
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
pckbd0: generic device class power management enabled
pckbd0: supported states: D0 D1 D3
wskbd0 at pckbd0: console keyboard
wskbd0: generic device class power management enabled
wskbd0: supported states: D0 D3
pms0 at pckbc1 (aux slot)
pckbc1: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse0: generic device class power management enabled
wsmouse0: supported states: D0 D3
pms0: generic device class power management enabled
pms0: supported states: D0 D3
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pci0: generic device class power management enabled
pci0: supported states: D0 D3
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x02)
pchb0: generic device class power management enabled
pchb0: supported states: D0 D3
cbb0 at pci0 dev 2 function 0: Texas Instruments PCI1250 PCI-CardBus Bridge (rev. 0x02)
cbb0: WARNING: power management not supported
cbb1 at pci0 dev 2 function 1: Texas Instruments PCI1250 PCI-CardBus Bridge (rev. 0x02)
cbb1: WARNING: power management not supported
vga1 at pci0 dev 3 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
wsdisplay0: generic device class power management enabled
wsdisplay0: supported states: D0 D3
vga1: display device class power management enabled
vga1: supported states: D0 D3
direct rendering for vga1 unsupported
piixpcib0 at pci0 dev 6 function 0
piixpcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixpcib0: generic device class power management enabled
piixpcib0: supported states: D0 D3
piixpcib0: SpeedStep SMI enabled
piixpcib0: WARNING: powerhook_establish is deprecated; please see devpm(4)
piixide0 at pci0 dev 6 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
atabus0: generic device class power management enabled
atabus0: supported states: D0 D1 D3
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
piixide0: generic device class power management enabled
piixide0: supported states: D0 D3
uhci0 at pci0 dev 6 function 2: Intel 82371AB (PIIX4) USB Host Controller (rev. 0x01)
uhci0: interrupting at irq 11
uhci0: generic device class power management enabled
uhci0: supported states: D0 D3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhub0: generic device class power management enabled
uhub0: supported states: D0 D3
usb0: generic device class power management enabled
usb0: supported states: D0 D3
piixpm0 at pci0 dev 6 function 3
piixpm0: Intel 82371AB (PIIX4) Power Management Controller (rev. 0x02)
piixpm0: WARNING: powerhook_establish is deprecated; please see devpm(4)
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
iic0: WARNING: power management not supported
piixpm0: WARNING: power management not supported
cbb0: interrupting at irq 11
cbb0: WARNING: powerhook_establish is deprecated; please see devpm(4)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1
cardbus0: WARNING: power management not supported
pcmcia0 at cardslot0
pcmcia0: WARNING: power management not supported
cardslot0: WARNING: power management not supported
cbb1: interrupting at irq 11
cbb1: WARNING: powerhook_establish is deprecated; please see devpm(4)
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4
cardbus1: WARNING: power management not supported
pcmcia1 at cardslot1
pcmcia1: WARNING: power management not supported
cardslot1: WARNING: power management not supported
isa0 at piixpcib0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
sb0: WARNING: powerhook_establish is deprecated; please see devpm(4)
audio1 at sb0: half duplex, mmap, independent
audio1: audio device class power management enabled
audio1: supported states: D0 D3
midi2 at sb0: SB MIDI UART (CPU-intensive output)
midi2: WARNING: power management not supported
opl1 at sb0: model OPL3
midi3 at opl1: SB Yamaha OPL3 (CPU-intensive output)
midi3: WARNING: power management not supported
opl1: WARNING: power management not supported
sb0: WARNING: power management not supported
pas: can't map base register 388 in probe
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: WARNING: power management not supported
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fdc0: WARNING: power management not supported
isa0: WARNING: power management not supported
isapnp0: no ISA Plug 'n Play devices found
mainbus0: generic device class power management enabled
mainbus0: supported states: D0 D3
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <SANYO CRD-S372BV, , 1.24VA> cdrom removable
cd0: WARNING: power management not supported
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
atapibus0: WARNING: power management not supported
wd0 at atabus0 drive 0: <TOSHIBA MK2016GAP>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: WARNING: power management not supported
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA)
ep0 at pcmcia1 function 0: <3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002>
ep0: address 00:10:4b:a0:2b:20, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
ep0: WARNING: powerhook_establish is deprecated; please see devpm(4)
ep0: WARNING: power management not supported
an0 at pcmcia0 function 0: <Cisco Systems, 350 Series Wireless LAN Adapter>
an0: Cisco Systems 350 Series (firmware 5.30.14)
an0: 802.11 address: 00:0f:8f:ef:a2:4b, channel: 1-11
an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: WARNING: powerhook_establish is deprecated; please see devpm(4)
an0: WARNING: power management not supported
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
fd0: WARNING: power management not supported
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
acpi0: entering state 3
Suspending devices: audio1 uhub0 wsmouse0 wskbd0 usb0 atabus0 wsdisplay0 pms0 pckbd0 audio0 uhci0 piixide0 piixpcib0 vga1 pchb0 apm0 acpitz2 acpitz1 acpitz0 acpiacad0 acpibat0 acpiec0 pckbc2 pckbc1 npx1 attimer1 acpibut0 acpilid0 pci0 acpi0 cpu0 mainbus0.
Resuming devices: mainbus0 mainbus0 cpu0 acpi0 acpilid0 acpibut0 audio0 attimer1 npx1 pckbc1 pckbd0 wskbd0 pms0 wsmouse0 pckbc2 acpiec0 acpibat0 acpiacad0 acpitz0 acpitz1 acpitz2 apm0 pci0 pchb0 vga1 wsdisplay0 piixpcib0 audio1 piixide0 atabus0 uhci0 usb0 uhub0.