Heyas folks --

My Soekris net5501 finally arrived today, and apart from having to  
add the product ID of the ethernet controller to if_vr, mostly  
everything seems to work. I've included a dmesg below for the curious.

The only major pieces that don't appear to be supported yet are the  
hw crypto block and the SATA port.

Cheers,
Jared


Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,  
2005,
     2006, 2007
     The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
     The Regents of the University of California.  All rights reserved.

NetBSD 4.99.20 (GENERIC) #0: Fri Jun 15 17:09:12 EDT 2007
	jmcneill@jared-d-mcneills-computer.local:/Users/jmcneill/NetBSD/src/ 
sys/arch/i386/compile/obj/GENERIC
total memory = 511 MB
rbus: rbus_min_start set to 0x40000000
avail memory = 492 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfac40
mainbus0 (root)
ACPI Error (tbxfroot-0775): No valid RSDP was found [20060217]
ACPI Exception (tbxfroot-0531): AE_NOT_FOUND, RSDP structure not  
found - Flags=8 [20060217]
ACPI Exception (tbxface-0162): AE_NO_ACPI_TABLES, Could not get the  
RSDP [20060217]
ACPI Exception (tbxface-0211): AE_NO_ACPI_TABLES, Could not load  
tables [20060217]
ACPI: unable to load tables: AE_NO_ACPI_TABLES
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Geode LX (586-class), 499.93 MHz, id 0x5a2
cpu0: features 88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 88a93d<PGE,CMOV,MPC,MMX>
cpu0: "Geode(TM) Integrated Processor by AMD PCS"
cpu0: I-cache 64 KB 32B/line 16-way, D-cache 64 KB 32B/line 16-way
cpu0: L2 cache 128 KB 32B/line 4-way
cpu0: ITLB 16 4 KB entries fully associative
cpu0: DTLB 16 4 KB entries fully associative
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 1 function 0
pchb0: Advanced Micro Devices Geode LX Host-PCI Bridge (rev. 0x31)
Advanced Micro Devices Geode LX AES Security Block (entertainment  
crypto) at pci0 dev 1 function 2 not configured
vr0 at pci0 dev 6 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr0: interrupting at irq 11
vr0: Ethernet address: 00:00:24:c8:b3:80
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0034, rev. 3
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1 at pci0 dev 7 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr1: interrupting at irq 5
vr1: Ethernet address: 00:00:24:c8:b3:81
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x0002c6, model 0x0034, rev. 3
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2 at pci0 dev 8 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr2: interrupting at irq 9
vr2: Ethernet address: 00:00:24:c8:b3:82
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface
ukphy2: OUI 0x0002c6, model 0x0034, rev. 3
ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr3 at pci0 dev 9 function 0: VIA VT6105M (Rhine III) 10/100 Ethernet
vr3: interrupting at irq 12
vr3: Ethernet address: 00:00:24:c8:b3:83
ukphy3 at vr3 phy 1: Generic IEEE 802.3u media interface
ukphy3: OUI 0x0002c6, model 0x0034, rev. 3
ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 20 function 0
pcib0: Advanced Micro Devices CS5536 PCI-ISA Bridge (rev. 0x03)
viaide0 at pci0 dev 20 function 2
viaide0: Advanced Micro Devices CS5536 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel wired to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel wired to compatibility mode
viaide0: secondary channel ignored (disabled)
ohci0 at pci0 dev 20 function 4: Advanced Micro Devices CS5536 OHCI  
USB Controller (rev. 0x02)
ohci0: interrupting at irq 15
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 20 function 5: Advanced Micro Devices CS5536 EHCI  
USB Controller (rev. 0x02)
ehci0: interrupting at irq 15
ehci0: pre-2.0 USB rev
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: reported by CPUID; using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <SanDisk SDCFB-512>
wd0: drive supports 4-sector PIO transfers, LBA addressing
wd0: 488 MB, 993 cyl, 16 head, 63 sec, 512 bytes/sect x 1000944 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2
wd0(viaide0:0:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs