Subject: amd64 reboot when using acpi
To: None <current-users@netbsd.org>
From: Brett Lymn <blymn@baesystems.com.au>
List: current-users
Date: 06/09/2007 22:37:00
I have a Tyan S2895 motherboard, recent multiprocessor kernels will
spontaneously reboot if I have ACPI enabled in the kernel - even if I
have DDB enabled the machine just reboots.
I attached a serial console and managed to grab part of the trap
message before the machine reboots. It said:
fatal double fault in supervisor mode
trap type 13 code 0 rip ffffffff80102766 cs 8 rflags 10246 cr2 ffff80004eaa4ff8 cpl c rsp ffff80004eaa5000
The rip address seems to be this:
ffffffff80102210 T Xrecurse_legacy6
ffffffff801024f0 T Xrecurse_legacy7
ffffffff801027e0 T Xrecurse_legacy8
ffffffff80102ad0 T Xrecurse_legacy9
Doing a bit of digging around, the trap occurs when CPU 1 is started
up, pretty much as soon as CPU 1 starts the kernel explodes and we
reboot. A uniprocessor kernel with ACPI works fine as does a
multiprocessor kernel without ACPI. I would be able to live with the
latter but for the fact that there seems to be an interrupt issue that
causes my ahc(4) device to be non-functional, with ACPI enabled I am
guessing the interrupt routing is being fixed up because the scsi card
works fine. Has anyone any hints for what the problem may be?
Here is a copy of the output when I boot an ACPI kernel:
boot netbsd.acpi -sx
booting hd0a:netbsd.acpi (howto 0x80002)
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
2006, 2007
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
NetBSD 4.99.20 (SIREN.ACPI.MP) #2: Sat Jun 9 20:23:15 CST 2007
toor@siren:/usr/src/sys/arch/amd64/compile/SIREN.ACPI.MP
total memory = 4094 MB
avail memory = 3847 MB
mainbus0 (root)
mainbus0: scanning 0x9ac00 to 0x9aff0 for MP signature
mainbus0: scanning 0x9a800 to 0x9abf0 for MP signature
mainbus0: scanning 0xf0000 to 0xffff0 for MP signature
mainbus0: MP floating pointer found in bios at 0xf7860
mainbus0: MP config table at 0x9e431, 412 bytes long
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 280, 2411.23 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2: 1<SSE3>
cpu0: testing for erratum 89
cpu0: erratum 89 present
cpu0: testing for erratum 122
cpu0: WARNING: AMD errata present, BIOS upgrade may be
cpu0: WARNING: necessary to ensure reliable operation
cpu0: 16 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: starting
cpu1: Dual Core AMD Opteron(tm) Processor 280, 2411.11 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2: 1<SSE3>
cpu1: testing for erratum 122
cpu2 at mainbus0 apid 2: (application processor)
cpu2: starting
cpu2: Dual Core AMD Opteron(tm) Processor 280, 2411.11 MHz
cpu2: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu2: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu2: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu2: features2: 1<SSE3>
cpu2: testing for erratum 122
cpu3 at mainbus0 apid 3: (application processor)
cpu3: starting
cpu3: Dual Core AMD Opteron(tm) Processor 280, 2411.11 MHz
cpu3: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu3: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu3: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu3: features2: 1<SSE3>
cpu3: testing for erratum 122
ioapic0 at mainbus0 apid 4
, virtual wire modeioapic1 at mainbus0 apid 5
, virtual wire modeioapic2 at mainbus0 apid 6
, virtual wire modeioapic3 at mainbus0 apid 7
, virtual wire modeacpi0 at mainbus0: Advanced Configuration and Power Interface
ACPI-Fast 24-bit timer
mpacpi: could not get bus number, assuming bus 0
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: found subordinate bus 17 at level 2
mpacpi: found subordinate bus 19 at level 2
mpacpi: found root PCI bus 128 at level 1
mpacpi: found subordinate bus 129 at level 2
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: failed to derive bus number, ignoring
mpacpi: 7 PCI busses
mpacpi: ISA interrupt override 9 -> 9
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
mpacpi: configuring PCI bus 17 int routing
mpacpi: configuring PCI bus 19 int routing
mpacpi: configuring PCI bus 128 int routing
mpacpi: configuring PCI bus 129 int routing
ioapic0: pin 0 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
linkdev LSMB attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LSMB attached to pci0 device 1 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LUS0 attached to pci0 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LUS2 attached to pci0 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LMAC attached to pci0 device 10 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LACI attached to pci0 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LMCI attached to pci0 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LPID attached to pci0 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LTID attached to pci0 device 7 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LSI1 attached to pci0 device 8 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK1 attached to pci1 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK2 attached to pci1 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK3 attached to pci1 device 4 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK4 attached to pci1 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK4 attached to pci1 device 5 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK3 attached to pci2 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK4 attached to pci2 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK1 attached to pci2 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK2 attached to pci2 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 0 attached to pci17 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 1 attached to pci17 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 2 attached to pci17 device 4 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic1: pin 3 attached to pci17 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 0 attached to pci19 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 1 attached to pci19 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 2 attached to pci19 device 4 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 3 attached to pci19 device 4 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 1 attached to pci19 device 9 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 2 attached to pci19 device 9 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 3 attached to pci19 device 9 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 0 attached to pci19 device 9 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 2 attached to pci19 device 6 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic2: pin 3 attached to pci19 device 6 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LMAC attached to pci128 device 10 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK3 attached to pci129 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK4 attached to pci129 device 0 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK1 attached to pci129 device 0 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
linkdev LNK2 attached to pci129 device 0 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 [System Board] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0100 [AT Timer] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
PNP0800 [AT-style speaker sound] at acpi0 not configured
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
PNP0C04 [Math Coprocessor] at acpi0 not configured
PNP0A05 [Generic Container Device] at acpi0 not configured
PNP0501 [16550A-compatible COM port] at acpi0 not configured
PNP0700 [PC standard floppy disk controller] at acpi0 not configured
PNP0303 [IBM Enhanced (101/102-key, PS/2 mouse support)] at acpi0 not configured
PNP0F13 [PS/2 Port for PS/2-style Mice] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1mainbus0: added to list as bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0
pcib0: NVIDIA nForce4 PCI-ISA bridge (rev. 0xa3)
amdpm0 at pci0 dev 1 function 1: NVIDIA nForce4 SMBus (rev. 0xa2)
amdpm_smbus_attach...
amdpm0: system management at 0x8000
linkdev LSMB returned ACPI global int 20
amdpm0: interrupting at ioapic0 pin 20 (irq 12)
iic0 at amdpm0: I2C bus
amdpm0: random number generator enabled (apprx. 0ms)
ohci0 at pci0 dev 2 function 0: NVIDIA nForce4 USB Host Controller (rev. 0xa2)
linkdev LUS0 returned ACPI global int 21
ohci0: interrupting at ioapic0 pin 21 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: NVIDIA OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 10 ports with 10 removable, self powered
ehci0 at pci0 dev 2 function 1: NVIDIA nForce4 USB2 Host Controller (rev. 0xa3)
linkdev LUS2 returned ACPI global int 22
ehci0: interrupting at ioapic0 pin 22 (irq 7)
ehci0: BIOS refuses to give up ownership, using force
ehci0: companion controller, 4 ports each: ohci0
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: NVIDIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 10 ports with 10 removable, self powered
auich0 at pci0 dev 4 function 0: nForce4 AC-97 Audio
linkdev LACI returned ACPI global int 23
auich0: interrupting at ioapic0 pin 23 (irq 12)
auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
viaide0 at pci0 dev 6 function 0
viaide0: NVIDIA nForce4 IDE Controller (rev. 0xf2)
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
viaide1 at pci0 dev 7 function 0
viaide1: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
linkdev LTID returned ACPI global int 21
viaide1: using ioapic0 pin 21 (irq 11) for native-PCI interrupt
atabus2 at viaide1 channel 0
atabus3 at viaide1 channel 1
viaide2 at pci0 dev 8 function 0
viaide2: NVIDIA nForce4 Serial ATA Controller (rev. 0xf3)
linkdev LSI1 returned ACPI global int 22
viaide2: using ioapic0 pin 22 (irq 11) for native-PCI interrupt
atabus4 at viaide2 channel 0
atabus5 at viaide2 channel 1
ppb0 at pci0 dev 9 function 0: NVIDIA nForce4 PCI Host Bridge (rev. 0xa2)
pci1 at ppb0 bus 1ppb0: added to list as bus 1
pci1: i/o space, memory space enabled
fwohci0 at pci1 dev 5 function 0: Texas Instruments TSB43AA22/A IEEE 1394 Host Controller (rev. 0x00)
linkdev LNK4 returned ACPI global int 16
fwohci0: interrupting at ioapic0 pin 16 (irq 11)
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:e0:81:00:00:26:e4:75
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
ieee1394if0 at fwohci0: IEEE1394 bus
fwip0 at ieee1394if0: IP over IEEE1394
fwohci0: Initiate bus reset
nfe0 at pci0 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xa3)
linkdev LMAC returned ACPI global int 23
nfe0: interrupting at ioapic0 pin 23 (irq 11)
nfe0: Ethernet address 00:e0:81:70:2d:34
makphy0 at nfe0 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb1 at pci0 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci2 at ppb1 bus 2ppb1: added to list as bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
vga0 at pci2 dev 0 function 0: NVIDIA product 0x0193 (rev. 0xa2)
vga0: WARNING: ignoring 64-bit BAR @ 0x14
vga0: WARNING: ignoring 64-bit BAR @ 0x1c
wsdisplay0 at vga0 kbdmux 1
direct rendering for vga0 unsupported
pchb0 at pci0 dev 24 function 0
pchb0: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb1 at pci0 dev 24 function 1
pchb1: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb2 at pci0 dev 24 function 2
pchb2: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 3
pchb3: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
pchb4 at pci0 dev 25 function 0
pchb4: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb5 at pci0 dev 25 function 1
pchb5: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb6 at pci0 dev 25 function 2
pchb6: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb7 at pci0 dev 25 function 3
pchb7: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
pci3 at mainbus0 bus 17mainbus0: added to list as bus 17
pci3: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ppb2 at pci3 dev 4 function 0: Intel S21152BA,S21154AE/BE PCI-PCI Bridge (rev. 0x00)
pci4 at ppb2 bus 18ppb2: added to list as bus 18
pci4: i/o space, memory space enabled, rd/line, wr/inv ok
fxp0 at pci4 dev 4 function 0: i82550 Ethernet, rev 13
fxp0: interrupting at ioapic1 pin 0 (irq 12)
fxp0: Ethernet address 00:02:b3:a6:16:a3
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci4 dev 5 function 0: i82550 Ethernet, rev 13
fxp1: interrupting at ioapic1 pin 1 (irq 11)
fxp1: Ethernet address 00:02:b3:a6:16:a4
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 4
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci5 at mainbus0 bus 19mainbus0: added to list as bus 19
pci5: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc0 at pci5 dev 9 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc0: interrupting at ioapic2 pin 1 (irq 11)
ahc0: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
pci6 at mainbus0 bus 128mainbus0: added to list as bus 128
pci6: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
NVIDIA nForce4 Memory Controller (miscellaneous memory, revision 0xa3) at pci6 dev 0 function 0 not configured
NVIDIA product 0x00d3 (miscellaneous memory, revision 0xa3) at pci6 dev 1 function 0 not configured
nfe1 at pci6 dev 10 function 0: NVIDIA nForce4 Ethernet (rev. 0xa3)
linkdev LMAC returned ACPI global int 52
nfe1: interrupting at ioapic3 pin 20 (irq 5)
nfe1: Ethernet address 00:e0:81:70:2d:35
makphy1 at nfe1 phy 1: Marvell 88E1111 Gigabit PHY, rev. 2
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci6 dev 14 function 0: NVIDIA nForce4 PCIe Host Bridge (rev. 0xa3)
pci7 at ppb3 bus 129ppb3: added to list as bus 129
pci7: i/o space, memory space enabled, rd/line, wr/inv ok
NVIDIA product 0x0193 (VGA display, revision 0xa2) at pci7 dev 0 function 0 not configured
Link Device LSMB:
Index IRQ Rtd Ref IRQs
0 20 Y 2 20 21 22 23 polarity 0 trigger 0
Link Device LUS0:
Index IRQ Rtd Ref IRQs
0 21 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LUS2:
Index IRQ Rtd Ref IRQs
0 22 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LMAC:
Index IRQ Rtd Ref IRQs
0 23 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LACI:
Index IRQ Rtd Ref IRQs
0 23 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LMCI:
Index IRQ Rtd Ref IRQs
0 255 N 1 20 21 22 23 polarity 0 trigger 0
Link Device LPID:
Index IRQ Rtd Ref IRQs
0 255 N 1 20 21 22 23 polarity 0 trigger 0
Link Device LTID:
Index IRQ Rtd Ref IRQs
0 21 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LSI1:
Index IRQ Rtd Ref IRQs
0 22 Y 1 20 21 22 23 polarity 0 trigger 0
Link Device LNK1:
Index IRQ Rtd Ref IRQs
0 255 N 2 16 17 18 19 polarity 0 trigger 0
Link Device LNK2:
Index IRQ Rtd Ref IRQs
0 255 N 2 16 17 18 19 polarity 0 trigger 0
Link Device LNK3:
Index IRQ Rtd Ref IRQs
0 255 N 2 16 17 18 19 polarity 0 trigger 0
Link Device LNK4:
Index IRQ Rtd Ref IRQs
0 16 Y 3 16 17 18 19 polarity 0 trigger 0
Link Device LMAC:
Index IRQ Rtd Ref IRQs
0 52 Y 1 52 53 54 55 polarity 0 trigger 0
Link Device LNK3:
Index IRQ Rtd Ref IRQs
0 255 N 1 48 49 50 51 polarity 0 trigger 0
Link Device LNK4:
Index IRQ Rtd Ref IRQs
0 255 N 1 48 49 50 51 polarity 0 trigger 0
Link Device LNK1:
Index IRQ Rtd Ref IRQs
0 255 N 1 48 49 50 51 polarity 0 trigger 0
Link Device LNK2:
Index IRQ Rtd Ref IRQs
0 255 N 1 48 49 50 51 polarity 0 trigger 0
cpu0: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint1 0<vector=0,delmode=0,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int1 91<vector=91,delmode=0,dest=0> 0<target=0>
ioapic0: int4 d0<vector=d0,delmode=0,dest=0> 0<target=0>
ioapic0: int6 66<vector=66,delmode=0,dest=0> 0<target=0>
ioapic0: int9 a090<vector=90,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic0: int14 63<vector=63,delmode=0,dest=0> 0<target=0>
ioapic0: int15 64<vector=64,delmode=0,dest=0> 0<target=0>
ioapic0: int16 c065<vector=65,delmode=0,irrpending,level,dest=0> 0<target=0>
ioapic0: int20 8060<vector=60,delmode=0,level,dest=0> 0<target=0>
ioapic0: int21 c061<vector=61,delmode=0,irrpending,level,dest=0> 0<target=0>
ioapic0: int22 c062<vector=62,delmode=0,irrpending,level,dest=0> 0<target=0>
ioapic0: int23 8070<vector=70,delmode=0,level,dest=0> 0<target=0>
ioapic1: enabling
ioapic1: int0 a071<vector=71,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic1: int1 a072<vector=72,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic2: enabling
ioapic2: int1 a067<vector=67,delmode=0,actlo,level,dest=0> 0<target=0>
ioapic3: enabling
ioapic3: int20 8073<vector=73,delmode=0,level,dest=0> 0<target=0>
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
ieee1394if0: bus manager 0 (me)
auich0: measured ac97 link rate at 47999 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <PIONEER DVD-RW DVR-110D, EGDC052619WL, 1.08> cdrom removable
viaide1 port 1: device present, speed: 1.5Gb/s
viaide2 port 1: device present, speed: 1.5Gb/s
wd0 at atabus3 drive 0: <ST3120026AS>
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd1 at atabus5 drive 0: <ST3750640AS>
wd1: quirks 2<FORCE_LBA48>
wd1: 698 GB, 1453521 cyl, 16 head, 63 sec, 512 bytes/sect x 1465149168 sectors
uhidev0 at uhub0 port 4 configuration 1 interface 0
uhidev0: Razer Razer Diamondback Optical Mouse, rev 2.00/1.00, addr 2, iclass 3/1
ums0 at uhidev0: 7 buttons and Z dir.
wsmouse0 at ums0 mux 0
sd0 at scsibus0 target 0 lun 0: <HP, 18.2GB A 80-F305, > disk fixed
sd0: 17366 MB, 11941 cyl, 8 head, 372 sec, 512 bytes/sect x 35566480 sectors
sd0: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST373307LC, 0006> disk fixed
sd1: 70007 MB, 49855 cyl, 4 head, 718 sec, 512 bytes/sect x 143374744 sectors
sd1: sync (50.00ns offset 63), 16-bit (40.000MB/s) transfers, tagged queueing
cd1 at scsibus0 target 6 lun 0: <PLEXTOR, CD-R PX-R820T, 1.06> cdrom removable
cd1: sync (100.00ns offset 8), 8-bit (10.000MB/s) transfers
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 1 running
kernel: double fault trap, code=0
Stopped in pid 18.1
--
Brett Lymn