With current kernel, amd64 platform, moderate activity, I get:

===========================================================================
kernel: privileged instruction fault trap, code=0

Stopped in pid 4.22.1 (cvs) at  netbsd:uiomove+0xd3: testb  %cl, 0xffffffff8514247c(%rbx)
===========================================================================

This was doing a CVS update of pkgsrc, but I also see hangs when
working in X. (I don't have a serial console, so I can't see the
message in that case.) A kernel from a few weeks ago works fine on
the same hardware:

NetBSD capo 4.99.13 NetBSD 4.99.13 (CAPO64) #3: Tue Mar  6 08:43:08 EST 2007  gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64 amd64

   dmesg output and kernel config (not really GENERIC) included
below.

					Gary Duzan



Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.13 (CAPO64) #3: Tue Mar  6 08:43:08 EST 2007
	gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64
total memory = 2047 MB
avail memory = 1967 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.13 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3
ioapic1: pa 0xfec10000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000625>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0C04 [Math Coprocessor] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: expected BUFFER, got 4
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1695 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured
pchb1 at pci0 dev 4 function 0
pchb1: Acer Labs product 0x1689 (rev. 0x00)
agp at pchb1 not configured
ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 11)
rtk0: Ethernet address 00:50:ba:60:0e:19
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4)
skc0: interrupt moderation is 0 us
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured
auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at ioapic0 pin 18 (irq 7)
auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo
auacer0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auacer0: full duplex, independent
Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured
aceride0 at pci0 dev 18 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at aceride0 channel 1
pciide0 at pci0 dev 18 function 1
pciide0: Acer Labs product 0x5289 (rev. 0x10)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus3 at pciide0 channel 1
ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ioapic0 pin 21 (irq 4)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ioapic0 pin 22 (irq 11)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pchb2 at pci0 dev 24 function 0
pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 1
pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 2
pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 3
pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BENQ    DVD LS DW1655, KWW3609559SC0, BCGB> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub3: device problem, disabling port 3
boot device: wd1
root on wd1a dumps on wd0b
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
skc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
syncing disks... 5 done
unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.13 (CAPO64) #3: Tue Mar  6 08:43:08 EST 2007
	gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64
total memory = 2047 MB
avail memory = 1967 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.13 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3
ioapic1: pa 0xfec10000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000625>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0C04 [Math Coprocessor] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: expected BUFFER, got 4
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1695 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured
pchb1 at pci0 dev 4 function 0
pchb1: Acer Labs product 0x1689 (rev. 0x00)
agp at pchb1 not configured
ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 11)
rtk0: Ethernet address 00:50:ba:60:0e:19
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4)
skc0: interrupt moderation is 0 us
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured
auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at ioapic0 pin 18 (irq 7)
auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo
auacer0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auacer0: full duplex, independent
Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured
aceride0 at pci0 dev 18 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at aceride0 channel 1
pciide0 at pci0 dev 18 function 1
pciide0: Acer Labs product 0x5289 (rev. 0x10)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus3 at pciide0 channel 1
ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ioapic0 pin 21 (irq 4)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ioapic0 pin 22 (irq 11)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pchb2 at pci0 dev 24 function 0
pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 1
pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 2
pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 3
pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BENQ    DVD LS DW1655, KWW3609559SC0, BCGB> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3
uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhub4: device problem, disabling port 2
uscanner0 at uhub4 port 4
uscanner0: Hewlett Packard HP ScanJet 5200C, rev 1.00/1.00, addr 3
boot device: wd1
root on wd1a dumps on wd0b
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
skc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
uhidev0 at uhub4 port 3 configuration 1 interface 0
uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhidev0: bad input length 4 != 0
syncing disks... 5 3 done
unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.16 (CAPO64) #6: Fri Mar 30 05:28:12 EDT 2007
	gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64
total memory = 2047 MB
avail memory = 1967 MB
sysctl_createv: sysctl_create(machine) returned 17
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.16 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2: 1<SSE3>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2: 1<SSE3>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3
ioapic1: pa 0xfec10000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000625>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0C04 [Math Coprocessor] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: expected BUFFER, got 4
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1695 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured
pchb1 at pci0 dev 4 function 0
pchb1: Acer Labs product 0x1689 (rev. 0x00)
agp at pchb1 not configured
ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 11)
rtk0: Ethernet address 00:50:ba:60:0e:19
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4)
skc0: interrupt moderation is 0 us
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured
auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at ioapic0 pin 18 (irq 7)
auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo
auacer0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auacer0: full duplex, independent
Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured
aceride0 at pci0 dev 18 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at aceride0 channel 1
pciide0 at pci0 dev 18 function 1
pciide0: Acer Labs product 0x5289 (rev. 0x10)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus3 at pciide0 channel 1
ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ioapic0 pin 21 (irq 4)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ioapic0 pin 22 (irq 11)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pchb2 at pci0 dev 24 function 0
pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 1
pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 2
pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 3
pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BENQ    DVD LS DW1655, KWW3609559SC0, BCGB> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3
uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhub4: device problem, disabling port 3
uscanner0 at uhub4 port 4
uscanner0: Hewlett Packard Scanjet 5200C, rev 1.00/1.00, addr 3
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
boot device: wd1
root on wd1a dumps on wd0b
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
skc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
uhidev0: bad input length 4 != 0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.16 (CAPO64) #6: Fri Mar 30 05:28:12 EDT 2007
	gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64
total memory = 2047 MB
avail memory = 1967 MB
sysctl_createv: sysctl_create(machine) returned 17
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.15 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: features2: 1<SSE3>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: features2: 1<SSE3>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3
ioapic1: pa 0xfec10000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000625>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0C04 [Math Coprocessor] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: expected BUFFER, got 4
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1695 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured
pchb1 at pci0 dev 4 function 0
pchb1: Acer Labs product 0x1689 (rev. 0x00)
agp at pchb1 not configured
ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
direct rendering for vga0 unsupported
ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 11)
rtk0: Ethernet address 00:50:ba:60:0e:19
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4)
skc0: interrupt moderation is 0 us
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured
auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at ioapic0 pin 18 (irq 7)
auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo
auacer0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auacer0: full duplex, independent
Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured
aceride0 at pci0 dev 18 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at aceride0 channel 1
pciide0 at pci0 dev 18 function 1
pciide0: Acer Labs product 0x5289 (rev. 0x10)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus3 at pciide0 channel 1
ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ioapic0 pin 21 (irq 4)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ioapic0 pin 22 (irq 11)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pchb2 at pci0 dev 24 function 0
pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 1
pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 2
pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 3
pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BENQ    DVD LS DW1655, KWW3609559SC0, BCGB> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3
uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhub4: device problem, disabling port 2
uscanner0 at uhub4 port 4
uscanner0: Hewlett Packard Scanjet 5200C, rev 1.00/1.00, addr 3
uhub4: device problem, disabling port 3
boot device: wd1
root on wd1a dumps on wd0b
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
uhidev0 at uhub4 port 3 configuration 1 interface 0
uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 4, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
skc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)
uhidev0: bad input length 4 != 0
uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e
uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e
uvm_fault(0xffffffff805ebb00, 0xffffffff85142000, 1) -> e
syncing disks... done
unmounting file systems...Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
    2006, 2007
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.13 (CAPO64) #3: Tue Mar  6 08:43:08 EST 2007
	gary@capo:/usr/obj/sys/arch/amd64/compile.amd64/CAPO64
total memory = 2047 MB
avail memory = 1967 MB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
mainbus0 (root)
cpu0 at mainbus0 apid 0: (boot processor)
cpu0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.11 MHz
cpu0: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu0: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 512 KB 64B/line 16-way
cpu0: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
cpu0: calibrating local timer
cpu0: apic clock running at 200 MHz
cpu0: 8 page colors
cpu1 at mainbus0 apid 1: (application processor)
cpu1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+, 2000.07 MHz
cpu1: features: f7dbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: f7dbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,MMXX,MMX>
cpu1: features: f7dbfbff<FXSR,SSE,SSE2,HTT,LONG,3DNOW2,3DNOW>
cpu1: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu1: L2 cache 512 KB 64B/line 16-way
cpu1: ITLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: DTLB 32 4 KB entries fully associative, 8 4 MB entries fully associative
cpu1: AMD Power Management features: f<TTP,VID,FID,TS>
cpu0: AMD Cool`n'Quiet Technology 2000 MHz
cpu0: available frequencies (Mhz): 1000 1800 2000
ioapic0 at mainbus0 apid 2
ioapic0: pa 0xfec00000, version 11, 24 pins
ioapic1 at mainbus0 apid 3
ioapic1: pa 0xfec10000, version 11, 16 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: using Intel ACPI CA subsystem version 20060217
acpi0: X/RSDT: OemId <A M I ,OEMRSDT ,09000625>, AslId <MSFT,00000097>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
timecounter: Timecounter "ACPI-Fast" frequency 3579545 Hz quality 1000
ACPI-Fast 32-bit timer
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 [PCI/PCI-X Host Bridge] at acpi0 not configured
PNP0000 [AT Interrupt Controller] at acpi0 not configured
PNP0200 [AT DMA Controller] at acpi0 not configured
attimer0 at acpi0 (PNP0100): AT Timer
attimer0: io 0x40-0x43 irq 0
PNP0B00 [AT Real-Time Clock] at acpi0 not configured
pcppi0 at acpi0 (PNP0800)
pcppi0: io 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
PNP0C04 [Math Coprocessor] at acpi0 not configured
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
fdc1: expected BUFFER, got 4
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
pckbc0 at acpi0 (PNP0303): kbd port
pckbc0: io 0x60,0x64 irq 1
pckbc1 at acpi0 (PNP0F03): aux port
pckbc1: irq 12
PNP0C02 [Plug and Play motherboard register resources] at acpi0 not configured
PNP0C01 [System Board] at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C-170): ACPI Power Button
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
PNP0C0F [PCI interrupt link device] at acpi0 not configured
pcppi0: attached to attimer0
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Acer Labs product 0x1695 (rev. 0x00)
ppb0 at pci0 dev 1 function 0: Acer Labs product 0x524b (rev. 0x00)
pci1 at ppb0 bus 1
pci1: memory space enabled, rd/line, wr/inv ok
ppb1 at pci0 dev 2 function 0: Acer Labs product 0x524c (rev. 0x00)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
ppb2 at pci0 dev 3 function 0: Acer Labs product 0x524d (rev. 0x00)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled, rd/line, wr/inv ok
unknown vendor 0x197b product 0x2360 (SATA mass storage, interface 0x01, revision 0x02) at pci3 dev 0 function 0 not configured
pchb1 at pci0 dev 4 function 0
pchb1: Acer Labs product 0x1689 (rev. 0x00)
agp at pchb1 not configured
ppb3 at pci0 dev 5 function 0: Acer Labs product 0x5246 (rev. 0x00)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 0 function 0: ATI Technologies Radeon 7000/VE QY (rev. 0x00)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
ppb4 at pci0 dev 6 function 0: Acer Labs M5249 Hypertransport to PCI bridge (rev. 0x00)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
rtk0 at pci5 dev 5 function 0: D-Link Systems DFE 530TX+ (rev. 0x10)
rtk0: interrupting at ioapic0 pin 20 (irq 11)
rtk0: Ethernet address 00:50:ba:60:0e:19
rlphy0 at rtk0 phy 7: Realtek internal PHY
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
skc0 at pci5 dev 6 function 0: ioapic0 pin 21 (irq 4)
skc0: interrupt moderation is 0 us
skc0: DGE-530T Gigabit Ethernet Adapter rev. (0x9)
sk0 at skc0 port A: Ethernet address 00:15:e9:bd:0c:1e
makphy0 at sk0 phy 0: Marvell 88E1011 Gigabit PHY, rev. 5
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1563 PCI-ISA Bridge (rev. 0x70)
Acer Labs M7101 Power Management Controller (miscellaneous bridge) at pci0 dev 7 function 1 not configured
auacer0 at pci0 dev 8 function 0: Acer Labs M5455 Audio controller
auacer0: interrupting at ioapic0 pin 18 (irq 7)
auacer0: ac97: Avance Logic ALC850 codec; no 3D stereo
auacer0: ac97: ext id 9c6<AC97_23,LDAC,SDAC,CDAC,SPDIF,DRA>
audio0 at auacer0: full duplex, independent
Acer Labs product 0x5263 (ethernet network, revision 0x40) at pci0 dev 17 function 0 not configured
aceride0 at pci0 dev 18 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc7)
aceride0: bus-master DMA support present
aceride0: primary channel configured to compatibility mode
aceride0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at aceride0 channel 0
aceride0: secondary channel configured to compatibility mode
aceride0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at aceride0 channel 1
pciide0 at pci0 dev 18 function 1
pciide0: Acer Labs product 0x5289 (rev. 0x10)
pciide0: bus-master DMA support present, but unused (no driver support)
pciide0: primary channel configured to native-PCI mode
pciide0: using ioapic0 pin 19 (irq 5) for native-PCI interrupt
atabus2 at pciide0 channel 0
pciide0: secondary channel configured to native-PCI mode
atabus3 at pciide0 channel 1
ohci0 at pci0 dev 19 function 0: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci0: interrupting at ioapic0 pin 20 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 19 function 1: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci1: interrupting at ioapic0 pin 21 (irq 4)
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ohci2 at pci0 dev 19 function 2: Acer Labs M5237 USB 1.1 Host Controller (rev. 0x03)
ohci2: interrupting at ioapic0 pin 22 (irq 11)
ohci2: OHCI version 1.0, legacy support
usb2 at ohci2: USB revision 1.0
uhub2 at usb2
uhub2: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 19 function 3: Acer Labs M5239 USB 2.0 Host Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 5)
ehci0: BIOS has given up ownership
ehci0: EHCI version 1.0
ehci0: companion controllers, 3 ports each: ohci0 ohci1 ohci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Acer Labs EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 8 ports with 8 removable, self powered
pchb2 at pci0 dev 24 function 0
pchb2: Advanced Micro Devices AMD64 HyperTransport configuration (rev. 0x00)
pchb3 at pci0 dev 24 function 1
pchb3: Advanced Micro Devices AMD64 Address Map configuration (rev. 0x00)
pchb4 at pci0 dev 24 function 2
pchb4: Advanced Micro Devices AMD64 DRAM configuration (rev. 0x00)
pchb5 at pci0 dev 24 function 3
pchb5: Advanced Micro Devices AMD64 Miscellaneous configuration (rev. 0x00)
isa0 at pcib0
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
fd0 at fdc1 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
wd0 at atabus0 drive 0: <ST320423A>
wd0: drive supports 32-sector PIO transfers, LBA addressing
wd0: 19536 MB, 39693 cyl, 16 head, 63 sec, 512 bytes/sect x 40011300 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at atabus0 drive 1: <MAXTOR 6L080L4>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 76345 MB, 155114 cyl, 16 head, 63 sec, 512 bytes/sect x 156355584 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA)
wd1(aceride0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <BENQ    DVD LS DW1655, KWW3609559SC0, BCGB> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(aceride0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhub4 at uhub3 port 3
uhub4: Standard Microsystems product 0xa700, class 9/0, rev 2.00/0.00, addr 2
uhub4: multiple transaction translators
uhub4: 4 ports with 4 removable, self powered
uhidev0 at uhub4 port 3 configuration 1 interface 0
uhidev0: Primax Electronics product 0x4d09, rev 1.00/0.10, addr 3, iclass 3/1
ums0 at uhidev0: 5 buttons and Z dir.
wsmouse1 at ums0 mux 0
uhub4: device problem, disabling port 4
boot device: wd1
root on wd1a dumps on wd0b
ulpt0 at uhub1 port 2 configuration 1 interface 0
ulpt0: HewLett Packard HP LaserJet 1200, rev 1.10/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
skc0: interrupt moderation is 1000 us
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsdisplay0: screen 5 added (80x25, vt100 emulation)
wsdisplay0: screen 6 added (80x25, vt100 emulation)
wsdisplay0: screen 7 added (80x25, vt100 emulation)

# $NetBSD: GENERIC,v 1.21 2004/01/14 22:29:03 jonathan Exp $
#
# GENERIC machine description file
# 
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include	"arch/amd64/conf/std.amd64"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident 		"GENERIC-$Revision: 1.21 $"

maxusers	32		# estimated number of users

# AMD PowerNow! K8
options 	POWERNOW_K8
#options 	POWERNOW_DEBUG

# delay between "rebooting ..." message and hardware reset, in milliseconds
#options 	CPURESET_DELAY=2000

# This option allows you to force a serial console at the specified
# I/O address.   see console(4) for details.
#options 	CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
#	you don't want the option below ON iff you are using the
#	serial console option of the new boot strap code.
#options 	CONS_OVERRIDE	# Always use above! independent of boot info

# The following options override the memory sizes passed in from the boot
# block.  Use them *only* if the boot block is unable to determine the correct
# values.  Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options 	REALBASEMEM=639		# size of base memory (in KB)
#options 	REALEXTMEM=15360	# size of extended memory (in KB)

# Standard system options

options 	INSECURE	# disable kernel security levels - X needs this

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

options 	KTRACE		# system call tracing via ktrace(1)
options 	SYSTRACE	# system call vetting via systrace(1)

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing
#options 	SHMMAXPGS=2048	# 2048 pages is the default
options 	P1003_1B_SEMAPHORE

options 	NKMEMPAGES_MIN=32868

options 	LKM		# loadable kernel modules

#options 	USERCONF	# userconf(4) support
#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# Enable experimental buffer queue strategy for better responsiveness under 
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options 	NEW_BUFQ_STRATEGY

# Diagnostic/debugging support options
#options 	DIAGNOSTIC	# expensive kernel consistency checks
#options 	DEBUG		# expensive debugging checks/support
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)

#
# Because gcc omits the frame pointer for any -O level, the line below
# is needed to make backtraces in DDB work.
#
#makeoptions 	COPTS="-O2 -fno-omit-frame-pointer"
options 	DDB		# in-kernel debugger
options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
#options 	KGDB		# remote debugger
#options 	KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
makeoptions	DEBUG="-g"	# compile full symbol table

options 	MSGBUFSIZE=65504

# Compatibility options
options 	COMPAT_15	# NetBSD 1.5,
options 	COMPAT_16
options 	COMPAT_20
options 	COMPAT_30
options 	COMPAT_43	# and 4.3BSD
options 	COMPAT_386BSD_MBRPART # recognize old partition ID
options 	COMPAT_BSDPTY

options 	COMPAT_NETBSD32
options 	COMPAT_LINUX
options 	COMPAT_LINUX32	# req. COMPAT_LINUX and COMPAT_NETBSD32
options 	EXEC_ELF32
options 	EXEC_AOUT
#options 	EXEC_NOMID

# File systems
file-system 	FFS		# UFS
file-system 	EXT2FS		# second extended file system (linux)
file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
#file-system 	NTFS		# Windows/NT file system (experimental)
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
#file-system 	OVERLAY		# overlay file system
#file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
#file-system 	UNION		# union file system
file-system	CODA		# Coda File System; also needs vcoda (below)

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independent support
options 	SOFTDEP		# FFS soft updates support.
options 	NFSSERVER	# Network File System server
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
#options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
options		ACPIVERBOSE	# verboase ACPI configuration messages
options 	MIIVERBOSE	# verbose PHY autoconfig messages
options 	PCIVERBOSE	# verbose PCI device autoconfig messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	PCMCIAVERBOSE	# verbose PCMCIA configuration messages
options 	SCSIVERBOSE	# human readable SCSI error messages
options 	USBVERBOSE	# verbose USB device autoconfig messages
#options 	I2OVERBOSE	# verbose I2O driver messages

#options 	NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM

#
# wscons options
#
# builtin terminal emulations
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options 	WSDISPLAY_COMPAT_PCVT		# emulate some ioctls
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD		# can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options 	VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options 	VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
#options 	WSDISPLAY_CHARFUNCS		# mouse console support
# enable VGA raster mode capable of displaying multilingual text on console
#options 	VGA_RASTERCONSOLE

# Kernel root file system and dump configuration.
config		netbsd	root on wd1a type ffs dumps on wd0b
#config		netbsd	root on ? type ?
#config		netbsd	root on sd0a type ffs
#config		netbsd	root on ? type nfs

#
# Device configuration
#

mainbus0 at root

options 	MULTIPROCESSOR

acpi0 		at mainbus0
options 	ACPI_SCANPCI		# MPBIOS configures PCI roots
options 	PCI_INTR_FIXUP		# PCI interrupt routing via ACPI
#options 	ACPI_ACTIVATE_DEV	# If set, activate inactive devices

# ACPI devices
acpiacad* 	at acpi?		# ACPI AC Adapter
acpibat* 	at acpi?		# ACPI Battery
acpibut* 	at acpi?		# ACPI Button
acpiec* 	at acpi?		# ACPI Embedded Controller
#acpilid* 	at acpi?		# ACPI Lid Switch
acpitz* 	at acpi?		# ACPI Thermal Zone

# Mainboard devices
com* 		at acpi?		# Serial communications interface
fdc* 		at acpi?		# Floppy disk controller
lpt* 		at acpi?		# Parallel port
pckbc*  	at acpi?		# PC keyboard controller
attimer*  	at acpi?		# AT Timer
pcppi*  	at acpi?		# AT-style speaker sound
pckbc*  	at acpi?		# PC keyboard controller
#wss* 		at acpi?		# NeoMagic 256AV in wss mode

#options 	MPBIOS
#options 	MPBIOS_SCANPCI		# MPBIOS configures PCI roots
cpu* 		at mainbus?
ioapic* 	at mainbus? apid ?

#apm0	at mainbus0			# Advanced power management

# Tuning for power management, see apm(4) for more details.
#options 	APM_NO_IDLE		# Don't call BIOS CPU idle function
#options 	APM_V10_ONLY		# Use only the APM 1.0 calls
#options 	APM_NO_POWEROFF		# Don't power off on halt(8)
#options 	APM_POWER_PRINT		# Print stats on the console
#options 	APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts


# Basic Bus Support

# PCI bus support
pci*	at mainbus? bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
#puc*	at pci? dev ? function ?	# PCI "universal" comm. cards

#aapic* 	at pci? dev ? function ?	# AMD 8131 IO apic

# XXX - this hangs the system
#agp*	at pchb?

# ISA bus support
isa0	at mainbus?
isa0	at pcib?

# CardBus bridge support
#cbb*		at pci? dev ? function ?
#cardslot*	at cbb?

# CardBus bus support
#cardbus*	at cardslot?
#pcmcia* 	at cardslot?

# Coprocessor Support

# Console Devices

# wscons
#pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
#options 	PMS_DISABLE_POWERHOOK	# Disable PS/2 reset on resume
vga*		at pci? dev ? function ?
wsdisplay*	at vga? console ?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0

#attimer0	at isa?
#pcppi0		at isa?
sysbeep0	at pcppi?

# Cryptographic Devices

# PCI cryptographic devices
#hifn*	at pci? dev ? function ?	# Hifn 7755/7811/795x
#ubsec*	at pci? dev ? function ?	# Broadcom 5501/5601/580x/582x

# Serial Devices

# PCI serial interfaces
#com*	at puc? port ?			# 16x50s on "universal" comm boards
#cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards
#cz*	at pci? dev ? function ?	# Cyclades-Z multi-port serial boards

# PCMCIA serial interfaces
#com*	at pcmcia? function ?		# Modems and serial cards

#pcmcom*	at pcmcia? function ?		# PCMCIA multi-port serial cards
#com*	at pcmcom? slave ?		# ...and the slave devices

# CardBus serial interfaces
#com*	at cardbus? dev ? function ?	# Modems and serial cards

# ISA serial interfaces
#options 	COM_HAYESP		# adds Hayes ESP serial board support
#com0	at isa? port 0x3f8 irq 4	# Standard PC serial ports
#com1	at isa? port 0x2f8 irq 3

# Parallel Printer Interfaces

# PCI parallel printer interfaces
#lpt*	at puc? port ?			# || ports on "universal" comm boards

# ISA parallel printer interfaces
#lpt0	at isa? port 0x378 irq 7	# standard PC parallel ports
#lpt1	at isa? port 0x278

# Hardware monitors

# LM7[89] and compatible hardware monitors
#lm0	at isa?	port 0x290		# other common ports: 0x280, 0x310

# I2O devices
#iop*	at pci? dev ? function ?	# I/O processor
#iopsp*	at iop? tid ?			# SCSI/FC-AL ports
#ld*	at iop? tid ?			# block devices
# XXX dpti.c wants a processor type that is not assigned for x86-64
#dpti*	at iop? tid 0			# DPT/Adaptec control interface


# SCSI Controllers and Devices

# PCI SCSI controllers
#adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
#ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
#ahd*	at pci? dev ? function ?	# Adaptec aic790x SCSI
#bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI
#dpt*	at pci? dev ? function ?	# DPT SmartCache/SmartRAID
#iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
#isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
#mly*	at pci? dev ? function ?	# Mylex AcceleRAID and eXtremeRAID
#mpt*	at pci? dev ? function ?	# LSILogic 9x9 and 53c1030
#pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
#siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI
#esiop*	at pci? dev ? function ?	# Symbios 53c875 and newer SCSI
#options 	SIOP_SYMLED		# drive the act. LED in software
#trm*	at pci? dev ? function ?	# Tekram DC-395U/UW/F, DC-315/U SCSI

# PCMCIA SCSI controllers
#aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI
#esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI

# CardBus SCSI cards
#adv*	at cardbus? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480

# SCSI bus support
scsibus* at scsi?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI autochangers
#ses*	at scsibus? target ? lun ?	# SCSI Enclosure Services devices
ss*	at scsibus? target ? lun ?	# SCSI scanners
uk*	at scsibus? target ? lun ?	# SCSI unknown


# RAID controllers and devices
#aac*	at pci? dev ? function ?	# Broken -- 32bit assumptions.
#cac*	at pci? dev ? function ?	# Compaq PCI array controllers
#icp*	at pci? dev ? function ?	# ICP-Vortex GDT & Intel RAID
#mlx*	at pci? dev ? function ?	# Mylex DAC960 & DEC SWXCR family
#twe*	at pci? dev ? function ?	# 3ware Escalade RAID controllers

#ld*	at cac? unit ?
#ld*	at icp? unit ?
#ld*	at twe? unit ?
#ld*	at mlx? unit ?

#icpsp*	at icp? unit ?			# SCSI pass-through

# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
#acardide* at pci? dev ? function ?	# Acard IDE controllers
aceride* at pci? dev ? function ?	# Acer Lab IDE controllers
ahcisata* at pci? dev ? function ?	# AHCI SATA controllers
#artsata* at pci? dev ? function ?	# Intel i31244 SATA controller
#cmdide* at pci? dev ? function ?	# CMD tech IDE controllers
#cypide* at pci? dev ? function ?	# Cypress IDE controllers
#hptide* at pci? dev ? function ?	# Triones/HighPoint IDE controllers
#optiide* at pci? dev ? function ?	# Opti IDE controllers
piixide* at pci? dev ? function ?	# Intel IDE controllers
pdcide* at pci? dev ? function ?	# Promise IDE controllers
pdcsata* at pci? dev ? function ?	# Promise SATA150 controllers
#satalink* at pci? dev ? function ?	# SiI SATALink controllers
#siside* at pci? dev ? function ?	# SiS IDE controllers
#slide*  at pci? dev ? function ?	# Symphony Labs IDE controllers
viaide* at pci? dev ? function ?	# VIA/AMD/Nvidia IDE controllers

# PCMCIA IDE controllers
#wdc*	at pcmcia? function ?

# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
#wdc0	at isa? port 0x1f0 irq 14 flags 0x00
#wdc1	at isa? port 0x170 irq 15 flags 0x00

# ATA (IDE) bus support
atabus* at ata?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at atabus? drive ? flags 0x0000

# ATAPI bus support
atapibus* at atapi?

# ATA RAID configuration support, as found on some Promise controllers.  
pseudo-device ataraid  
ld*     at ataraid? vendtype ? unit ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
#st*	at atapibus? drive ? flags 0x0000	# ATAPI tape drives
uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown


# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
#fdc1	at isa? port 0x370 irq ? drq ?
fd*	at fdc? drive ?			# the drives themselves
# some machines need you to do this instead of fd*
#fd0	at fdc0 drive 0

# Network Interfaces

# PCI network interfaces
#an*	at pci? dev ? function ?	# Aironet PC4500/PC4800 (802.11)
#bge* 	at pci? dev ? function ?	# Broadcom 570x gigabit Ethernet
#bce* 	at pci? dev ? function ?	# Broadcom 440x 10/100 Etherner
#en*	at pci? dev ? function ?	# ENI/Adaptec ATM
#ep*	at pci? dev ? function ?	# 3Com 3c59x
#epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
#esh*	at pci? dev ? function ?	# Essential HIPPI card
#ex*	at pci? dev ? function ?	# 3Com 90x[BC]
#fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI
#fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
#gsip*	at pci? dev ? function ?	# NS83820 Gigabit Ethernet
#hme*	at pci? dev ? function ?	# Sun Microelectronics STP2002-STQ
#le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
#lmc*	at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
#mtd*	at pci? dev ? function ?	# Myson MTD803 3-in-1 Ethernet
#ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
nfe*	at pci?	dev ? function ?	# NVIDIA nForce Ethernet
#ntwoc*	at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial
#pcn*	at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
re*	at pci? dev ? function ?	# Realtek 8139C+/8169/8169S/8110S
rtk*	at pci? dev ? function ?	# Realtek 8129/8139
skc* 	at pci? dev ? function ?	# SysKonnect SK9821 Gigabit Ethernet
sk* 	at skc?				# SysKonnect SK9821 Gigabit Ethernet
#sf*	at pci? dev ? function ?	# Adaptec AIC-6915 Ethernet
#sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
#ste*	at pci? dev ? function ?	# Sundance ST-201 Ethernet
#stge*	at pci? dev ? function ?	# Sundance/Tamarack TC9021 Gigabit
#ti*	at pci? dev ? function ?	# Alteon ACEnic gigabit Ethernet
#tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
tlp*	at pci? dev ? function ?	# DECchip 21x4x and clones
#vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet
#wi*	at pci? dev ? function ?	# Intersil Prism Mini-PCI (802.11b)
#wm*	at pci? dev ? function ?	# Intel 82543/82544 gigabit

# PCMCIA network interfaces
#an*	at pcmcia? function ?		# Aironet PC4500/PC4800 (802.11)
#awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS)
#cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer
#ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
#mbe*	at pcmcia? function ?		# MB8696x based Ethernet
#ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
#ray*	at pcmcia? function ?		# Raytheon Raylink (802.11)
#sm*	at pcmcia? function ?		# Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr*	at pcmcia? function ?		# TROPIC based Token-Ring
#wi*	at pcmcia? function ?		# Lucent/Intersil WaveLan IEEE (802.11)
#xi*	at pcmcia? function ?		# Xircom CreditCard Ethernet

#mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
#com*	at mhzc?
#sm*	at mhzc?

# CardBus network cards
#ex*	at cardbus? dev ? function ?	# 3Com 3C575TX
#fxp*	at cardbus? dev ? function ?	# Intel i8255x
#rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139
#tlp*	at cardbus? dev ? function ?	# DECchip 21143

# MII/PHY support

acphy*	at mii? phy ?			# DAltima AC101 and AMD Am79c874 PHYs
amhphy*	at mii? phy ?			# AMD 79c901 Ethernet PHYs
bmtphy*	at mii? phy ?			# Broadcom BCM5201 and BCM5202 PHYs
brgphy*	at mii? phy ?			# Broadcom BCM5400-family PHYs
ciphy*	at mii? phy ?			# Cicada CS8201 Gig-E PHYs
dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
exphy*	at mii? phy ?			# 3Com internal PHYs
glxtphy* at mii? phy ?			# Level One LXT-1000 PHYs
gphyter* at mii? phy ?			# NS83861 Gig-E PHY
icsphy*	at mii? phy ?			# Integrated Circuit Systems ICS189x
igphy* 	at mii? phy ?			# Intel IGP01E1000
inphy*	at mii? phy ?			# Intel 82555 PHYs
iophy*	at mii? phy ?			# Intel 82553 PHYs
lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
makphy*	at mii? phy ?			# Marvell Semiconductor 88E1000 PHYs
nsphy*	at mii? phy ?			# NS83840 PHYs
nsphyter* at mii? phy ?			# NS83843 PHYs
pnaphy*	at mii? phy ?			# generic HomePNA PHYs
qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
rlphy*	at mii? phy ?			# Realtek 8139/8201L PHYs
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
tlphy*	at mii? phy ?			# ThunderLAN PHYs
tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs
urlphy* at mii? phy ?			# Realtek RTL8150L internal PHYs

# USB Controller and Devices

# PCI USB controllers
# The EHCI is not ready for prime time.
ehci*	at pci?	dev ? function ?	# Enhanced Host Controller
ohci*	at pci?	dev ? function ?	# Open Host Controller
#uhci*	at pci?	dev ? function ?	# Universal Host Controller (Intel)

# CardBus USB controllers
#ehci*	at cardbus? dev ? function ?	# Enhanced Host Controller
#ohci*	at cardbus? dev ? function ?	# Open Host Controller

# ISA USB controllers
#slhci0	at isa? port 0x300 irq 5	# ScanLogic SL811HS

# USB bus support
usb*	at ehci?
usb*	at ohci?
#usb*	at uhci?
#usb*	at slhci?

# USB Hubs
uhub*	at usb?
uhub*	at uhub? port ? configuration ? interface ?

# USB HID device
uhidev*	at uhub? port ? configuration ? interface ?

# USB Mice
ums*	at uhidev? reportid ?
wsmouse* at ums? mux 0

# USB Keyboards
ukbd*	at uhidev? reportid ?
wskbd*	at ukbd? console ? mux 1

# USB Generic HID devices
uhid*	at uhidev? reportid ?

# USB Printer
ulpt*	at uhub? port ? configuration ? interface ?

# USB Modem
umodem*	at uhub? port ? configuration ?
ucom*	at umodem?

# USB Mass Storage
umass*	at uhub? port ? configuration ? interface ?
wd* at umass?
scsibus* at umass? channel ?

# USB audio
uaudio*	at uhub? port ? configuration ?

# USB MIDI
umidi* at uhub? port ? configuration ?

# USB IrDA
# USB-IrDA bridge spec
#uirda* at uhub? port ? configuration ? interface ?
#irframe* at uirda?

# SigmaTel STIr4200 USB/IrDA Bridge
#ustir* at uhub? port ?
#irframe* at ustir?

# USB Ethernet adapters
#aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
#cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
#kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters
#uax*	at uhub? port ?		# ASIX AX88172 based adapters
#url*	at uhub? port ?		# Realtek RTL8150L based adapters
#udav*	at uhub? port ?		# Davicom DM9601 based adapters

# Prolific PL2301/PL2302 host-to-host adapter
upl*	at uhub? port ?

# Serial adapters
#ubsa*	at uhub? port ?		# Belkin serial adapter
#ucom*	at ubsa? portno ?

#uftdi*	at uhub? port ?		# FTDI FT8U100AX serial adapter
#ucom*	at uftdi? portno ?

#umct*	at uhub? port ?		# MCT USB-RS232 serial adapter
#ucom*	at umct? portno ?

#uplcom*	at uhub? port ?		# I/O DATA USB-RSAQ2 serial adapter
#ucom*	at uplcom? portno ?

#uvscom*	at uhub? port ?		# SUNTAC Slipper U VS-10U serial adapter
#ucom*	at uvscom? portno ?

# Diamond Multimedia Rio 500
#urio*	at uhub? port ?

# USB Handspring Visor
#uvisor*	at uhub? port ?
#ucom*	at uvisor?

# USB scanners
uscanner* at uhub? port ?

# USB scanners that use SCSI emulation, e.g., HP5300
usscanner* at uhub? port ?

# Y@P firmware loader
#uyap* at uhub? port ?

# D-Link DSB-R100 USB radio
#udsbr*	at uhub? port ?
#radio*	at udsbr?

# USB Generic driver
ugen*	at uhub? port ?


# IrDA and Consumer Ir devices

# Toshiba Oboe
#oboe* 	at pci? dev ? function ?	# broken -- vtophys
#irframe* at oboe?


# Audio Devices

# PCI audio devices
auacer* at pci? dev ? function ?	# ALi M5455 integrated AC'97 Audio
#auich*	at pci? dev ? function ?	# Intel/AMD/nVidia AC'97 Audio
#autri*	at pci? dev ? function ?	# Trident 4DWAVE based AC'97 Audio
#auvia*	at pci? dev ? function ?	# VIA AC'97 audio
#clcs*	at pci? dev ? function ?	# Cirrus Logic CS4280
#clct*	at pci? dev ? function ?	# Cirrus Logic CS4281
#cmpci*	at pci? dev ? function ?	# C-Media CMI8338/8738
#eap*	at pci? dev ? function ?	# Ensoniq AudioPCI
#emuxki*	at pci? dev ? function ?	# Creative SBLive! and PCI512
#esa*	at pci? dev ? function ?	# ESS Allegro-1 / Maestro-3 PCI Audio
#esm*	at pci? dev ? function ?	# ESS Maestro-1/2/2e PCI Audio Accelerator
#eso*	at pci? dev ? function ?	# ESS Solo-1 PCI AudioDrive
#fms*	at pci? dev ? function ?	# Forte Media FM801
#neo*	at pci? dev ? function ?	# NeoMagic 256 AC'97 Audio
#sv*	at pci? dev ? function ?	# S3 SonicVibes
#yds*	at pci? dev ? function ?	# Yamaha DS-1 PCI Audio

# PCMCIA audio devices
#esl*	at pcmcia? function ?			# ESS 1688 AudioDrive

# OPL[23] FM synthesizers
#opl0	at isa? port 0x388	# use only if not attached to sound card
#opl*	at cmpci? flags 1
#opl*	at esl?
#opl*	at eso?
#opl*	at fms?
#opl*	at sv?

# Audio support
audio*	at audiobus?

# MPU 401 UARTs
mpu*	at isa? port 0x330 irq 9	# MPU401 or compatible card
#mpu*	at cmpci?
#mpu*	at eso?
#mpu*	at yds?

# MIDI support
midi*	at midibus?
midi*	at pcppi?		# MIDI interface to the PC speaker

# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0	at pcppi?		# PC speaker


# FM-Radio devices
# PCI radio devices
#gtp*	at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card

# Radio support
#radio*	at gtp?


# TV cards

# Brooktree 848/849/878/879 based TV cards
#bktr* at pci? dev ? function ?
#radio* at bktr?


# Mice

# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#weasel* at pci?

# Pull in optional local configuration
include	"arch/amd64/conf/GENERIC.local"

# Pseudo-Devices

pseudo-device 	crypto			# opencrypto framework

# disk/mass storage pseudo-devices
#pseudo-device	ccd		4	# concatenated/striped disk devices
#pseudo-device	cgd		4	# cryptographic disk devices
#pseudo-device	raid		8	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
#Options to enable various other RAIDframe RAID types.
#options 	RF_INCLUDE_EVENODD=1
#options 	RF_INCLUDE_RAID5_RS=1
#options 	RF_INCLUDE_PARITYLOGGING=1
#options 	RF_INCLUDE_CHAINDECLUSTER=1
#options 	RF_INCLUDE_INTERDECLUSTER=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1

pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files

# network pseudo-devices
pseudo-device	bpfilter	8	# Berkeley packet filter
pseudo-device	ipfilter		# IP filter (firewall) and NAT
pseudo-device	loop			# network loopback
pseudo-device	ppp		2	# Point-to-Point Protocol
pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
#pseudo-device	sl		2	# Serial Line IP
#pseudo-device	strip		2	# Starmode Radio IP (Metricom)
#pseudo-device	irframetty		# IrDA frame line discipline
pseudo-device	tun		2	# network tunneling over tty
pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	sequencer	1	# MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well (BROKEN)
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms

# a pseudo device needed for Coda	# also needs CODA (above)
pseudo-device	vcoda		4	# coda minicache <-> venus comm.

# wscons pseudo-devices
pseudo-device	wsmux			# mouse & keyboard multiplexor
pseudo-device	wsfont