-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

>> NetBSD/i386 BIOS Boot, Revision 3.2
>> (explorer@speedy.flame.org, Wed Nov 17 14:16:02 PST 2004)
>> Memory: 635/2096064 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in 0
type "?" or "help" for help.
> boot -s
booting hd0a:netbsd (howto 0x2)
8680176+296612+399924 [397872+386878]=0x9b2dec
kenter: 0x00002000
acpi: wakecode is installed at 0x2000, size=376
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 4.99.5 (GENERIC.MP) #0: Wed Dec  6 16:05:11 CST 2006

explorer@speedy.home.flame.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 2047 MB
avail memory = 2002 MB
timecounter: Timecounters tick every 1.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd6a0
PCI BIOS rev. 2.1 found at 0xfd7c0
PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 0 bytes (-2 entries)
pcibios_pir_init: bad IRQ table size
mainbus0 (root)
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: AMD Athlon (686-class), 1526.61 MHz, id 0x662
cpu0: "AMD Athlon(tm) Processor"
cpu0: AMD Power Management features: 1<TS>
cpu0: calibrating local timer
cpu0: apic clock running at 265 MHz
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: AMD Athlon (686-class), 1526.53 MHz, id 0x662
cpu1: "AMD Athlon(tm) Processor"
cpu1: AMD Power Management features: 1<TS>
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 24 pins
acpi0 at mainbus0: Advanced Configuration and Power Interface
acpi0: fixed-feature power button present
acpi0: fixed-feature sleep button present
timecounter: Timecounter "ACPI-Safe" frequency 3579545 Hz quality 900
ACPI-Safe 24-bit timer
mpacpi: could not get bus number, assuming bus 0
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
attimer1 at acpi0 (PNP0100): AT Timer
attimer1: io 0x40-0x43 irq 0
PNP0B00 at acpi0 not configured
pcppi1 at acpi0 (PNP0800)
pcppi1: io 0x61
pcppi1: children must have an explicit unit
midi0 at pcppi1: PC speaker (CPU-intensive output)
sysbeep0 at pcppi1
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
PNP0C02 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0A05 at acpi0 not configured
com3 at acpi0 (PNP0501-1)
com3: io 0x3f8-0x3ff irq 4
com: ns16550a, working fifo
com3: console
lpt3 at acpi0 (PNP0401)
lpt3: io 0x378-0x37f,0x778-0x77f irq 7 drq 3
fdc1 at acpi0 (PNP0700)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pcppi1: attached to attimer1
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Advanced Micro Devices AMD762 Northbridge (rev. 0x11)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Advanced Micro Devices AMD762 AGP Bridge
(rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
pcib0 at pci0 dev 7 function 0
pcib0: Advanced Micro Devices AMD766 Southbridge (rev. 0x02)
viaide0 at pci0 dev 7 function 1
viaide0: Advanced Micro Devices AMD766 IDE Controller (rev. 0x01)
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at viaide0 channel 1
Advanced Micro Devices AMD766 Power Management Controller (miscellaneous
bridge, revision 0x01) at pci0 dev 7 function 3 not configured
ohci0 at pci0 dev 7 function 4: Advanced Micro Devices AMD766 USB Host
Controller (rev. 0x07)
ohci0: interrupting at ioapic0 pin 19 (irq 11)
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Advanced Micro OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ppb1 at pci0 dev 8 function 0: Distributed Processing Technology PCI-PCI
Bridge (rev. 0x01)
pci2 at ppb1 bus 2
pci2: memory space enabled, rd/line, wr/inv ok
iop0 at pci0 dev 8 function 1: I2O adapter <ADAPTEC 3210S>
iop0: interrupting at ioapic0 pin 16 (irq 5)
vga1 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
ex0 at pci0 dev 15 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex0: interrupting at ioapic0 pin 18 (irq 10)
ex0: MAC address 00:e0:81:03:ec:f2
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci0 dev 16 function 0: 3Com 3c980C-TXM 10/100 Ethernet (rev. 0x78)
ex1: interrupting at ioapic0 pin 19 (irq 11)
ex1: MAC address 00:e0:81:03:ec:f3
exphy1 at ex1 phy 24: 3Com internal media interface
exphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
isa0 at pcib0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
timecounter: Timecounter "clockinterrupt" frequency 1000 Hz quality 0
iop0: configuring...
dpti0 at iop0 tid 0: DPT/Adaptec RAID management interface
ld0 at iop0 tid 521: <ADAPTEC, RAID-5, 370F> direct access, fixed
ld0: 205 GB, 26773 cyl, 255 head, 63 sec, 512 bytes/sect x 430116864 sectors
iopsp0 at iop0 tid 8: SCSI port <ADAPTEC, AIC-7899, 00000001>
iopsp0: 16-bit, max sync rate 80MHz, initiator ID 7
iopsp0: target 0 (tid 513): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp0: target 0,0 (tid 513): in use by tid 529
iopsp0: target 1 (tid 514): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp0: target 1,0 (tid 514): in use by tid 530
iopsp0: target 2 (tid 519): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp0: target 2,0 (tid 519): in use by tid 535
iopsp0: target 3 (tid 520): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp0: target 3,0 (tid 520): in use by tid 536
scsibus0 at iopsp0: 16 targets, 8 luns per target
iopsp1 at iop0 tid 9: SCSI port <ADAPTEC, AIC-7899, 00000001>
iopsp1: 16-bit, max sync rate 80MHz, initiator ID 7
iopsp1: target 0 (tid 515): 8-bit, asynchronous
iopsp1: target 1 (tid 516): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp1: target 1,0 (tid 516): in use by tid 532
iopsp1: target 2 (tid 517): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp1: target 2,0 (tid 517): in use by tid 533
iopsp1: target 3 (tid 518): 16-bit, synchronous at 20MHz, offset 0x3f
iopsp1: target 3,0 (tid 518): in use by tid 534
scsibus1 at iopsp1: 16 targets, 8 luns per target
IPsec: Initialized Security Association Processing.
sd0 at scsibus1 target 0 lun 0: <IBM, DDYS-T36950N, S96H> disk fixed
sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

sd0: drive offline
sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x1b 00 00 00 01 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

opendisk: can't open dev sd0 (5)
sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x1b 00 00 00 01 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

opendisk: can't open dev sd0 (5)
sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

sd0(iopsp1:0:0:0):  Check Condition on CDB: 0x1b 00 00 00 01 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Logical Unit Not Ready, Cause Not Reportable

opendisk: can't open dev sd0 (5)
boot device: ld0
root on ld0a dumps on ld0b
root file system type: ffs
cpu1: CPU 0 running
Enter pathname of shell or RETUR

Note that disk sd0 really is dead, and is in fact not used or even
mounted.  Note also that the last line (with the word 'RETURN' cut off)
is the last I see over my serial console before it is totally dead,
locked up tight.

- --Michael
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2.2 (MingW32)

iD8DBQFFd43LuzMQWQwZDN0RArB4AKC0TgUCLJW8yRnwTk0V1Hg8iD3aagCgs/qK
49gMY4mLlP/AhfghfivJPz4=
=GiN3
-----END PGP SIGNATURE-----