Hi,

I just upgraded my firewall / router to current and found that the GENERIC 
kernel would hang during boot.  Removing the device

	piixpcib* at pci?

fixed the problem.  Is this something that is expected or should I try to 
track down the cause further?

I have attached the dmesg output, below.

Thanks,

Sverre

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.21 (FESK) #0: Fri Jul  7 14:29:23 MDT 2006
        toor@abbor.fesk.com:/usr/src/objdir/sys/arch/i386/compile.i386/FESK
total memory = 65148 KB
avail memory = 54920 KB
timecounter: Timecounters tick every 10.000 msec
timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
BIOS32 rev. 0 found at 0xfd7bd
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 400.93 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (rev. 0x02)
agp0 at pchb0: aperture at 0xf8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82443BX AGP Interface (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Matrox MGA G200 AGP (rev. 0x01)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 4 function 0
pcib0: Intel 82371AB (PIIX4) PCI-ISA Bridge (rev. 0x02)
piixide0 at pci0 dev 4 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
allocated pic pic0 type edge pin 14 level 6 to cpu0 slot 14 idt entry 46
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
allocated pic pic0 type edge pin 15 level 6 to cpu0 slot 15 idt entry 47
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 4 function 2: Intel 82371AB (PIIX4) USB Host Controller 
(rev. 0x01)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 4 function 3: Power Management Controller
timecounter: Timecounter "piixpm0" frequency 3579545 Hz quality 900
timecounter: selected timecounter "piixpm0" frequency 3579545 Hz quality 900
piixpm0 24-bit timer
piixpm0: interrupting at SMI
iic0 at piixpm0: I2C bus
siop0 at pci0 dev 11 function 0: Symbios Logic 53c825 (fast wide scsi)
allocated pic pic0 type level pin 11 level 6 to cpu0 slot 11 idt entry 43
siop0: interrupting at irq 11
scsibus0 at siop0: 16 targets, 8 luns per target
ex0 at pci0 dev 13 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x0)
allocated pic pic0 type level pin 10 level 7 to cpu0 slot 10 idt entry 42
ex0: interrupting at irq 10
ex0: MAC address 00:10:5a:9d:79:21
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcn0 at pci0 dev 14 function 0: AMD PCnet-PCI Ethernet
pcn0: Am79c970 PCnet-PCI rev 1, Ethernet address 00:80:ad:11:1a:55
allocated pic pic0 type level pin 9 level 7 to cpu0 slot 9 idt entry 41
pcn0: interrupting at irq 9
pcn0: 10base5, 10baseT, auto
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
allocated pic pic0 type edge pin 7 level 9 to cpu0 slot 7 idt entry 39
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
allocated pic pic0 type edge pin 4 level 13 to cpu0 slot 4 idt entry 36
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
allocated pic pic0 type edge pin 1 level 9 to cpu0 slot 1 idt entry 33
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker (CPU-intensive output)
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff
npx0: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
allocated pic pic0 type edge pin 6 level 6 to cpu0 slot 6 idt entry 38
pcppi0: attached to attimer0
isapnp0: read port 0x203
wdc2 at isapnp0 irq 0: unexpected configuration
sb1 at isapnp0 port 0x220/16,0x388/8,0x534/4 irq 5 drq 1,3
allocated pic pic0 type edge pin 5 level 11 to cpu0 slot 5 idt entry 37
sb1: AZT1008 PnP SOUND DEVICE AUDIO: dsp v3.01
audio0 at sb1: half duplex, mmap, independent
mpu at sb1 not configured
opl0 at sb1: model OPL3
midi1 at opl0: SB Yamaha OPL3 (CPU-intensive output)
mpu0 at isapnp0 port 0x300/2 irq 3
mpu0: AZT1008 PnP SOUND DEVICE MPU401 MIDI
midi2 at mpu0: Roland MPU-401 MIDI UART (CPU-intensive output)
allocated pic pic0 type edge pin 3 level 11 to cpu0 slot 3 idt entry 35
joy0 at isapnp0 port 0x200/8
joy0: AZT1008 PnP SOUND DEVICE GAME PORT
joy0: joystick not connected
timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
allocated pic pic0 type level pin 0 level 12 to cpu0 slot 0 idt entry 32
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <IBM-DTTA-350640>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6149 MB, 13328 cyl, 15 head, 63 sec, 512 bytes/sect x 12594960 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <MATSHITA CR-588, , LP12> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(piixide0:1:0): using PIO mode 4, DMA mode 2 (using DMA)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)