--mP3DRpeJDSE+ciuQ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline

On Fri, Jan 06, 2006 at 11:15:44AM -0500, Chris Tribo wrote:
> 
> Is it really an IOP device or is it a PERC/MegaRaid controller that  
> we don't know about yet? In the later case you can set the PERC/ 
> MegaRaid BIOS to present the disks as I2O instead of MegaRaid, Though  
> I didn't have any luck with this on a PERC 3/DC in a 2550, it would  
> show the raw disks on SCSI channel B and not the ld units.
> 
> Can you post a dmesg?

OK - here it is...

Cheers,

Patrick

> >!DSPAM:43be8c55278401104717710!

--mP3DRpeJDSE+ciuQ
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.pos"

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.15 (INSTALL) #3: Mon Jan  2 12:56:21 GMT 2006
	prlw1@quartz.itdept.newn.cam.ac.uk:/usr/obj/sys/arch/i386/compile.i386/INSTALL
total memory = 2047 MB
avail memory = 2003 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium III (686-class), 794.71 MHz, id 0x686
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 256 KB 32B/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pchb1 at pci0 dev 0 function 1
pchb1: ServerWorks CNB20-HE PCI/AGP bridge (rev. 0x06)
pci1 at pchb1 bus 1
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
ahc1 at pci1 dev 2 function 0: Adaptec aic7899 Ultra160 SCSI adapter
ahc1: interrupting at irq 5
ahc1: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
ahc2 at pci1 dev 2 function 1: Adaptec aic7899 Ultra160 SCSI adapter
ahc2: interrupting at irq 11
ahc2: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs
scsibus1 at ahc2: 16 targets, 8 luns per target
ppb0 at pci1 dev 10 function 0: Intel i960 RN PCI-PCI (rev. 0x02)
pci2 at ppb0 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
iop0 at pci1 dev 10 function 1: I2O adapter <MegaRAID>
iop0: interrupting at irq 5
fxp0 at pci0 dev 2 function 0: i82559 Ethernet, rev 8
fxp0: interrupting at irq 11
fxp0: May need receiver lock-up workaround
fxp0: Ethernet address 00:b0:d0:ab:4f:cc
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 4
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 14 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 15 function 0
pcib0: ServerWorks OSB4 southbridge (rev. 0x50)
rccide0 at pci0 dev 15 function 1
rccide0: ServerWorks OSB4 IDE Controller (rev. 0x00)
rccide0: bus-master DMA support present
rccide0: primary channel configured to compatibility mode
rccide0: primary channel interrupting at irq 14
atabus0 at rccide0 channel 0
rccide0: secondary channel configured to compatibility mode
rccide0: secondary channel interrupting at irq 15
atabus1 at rccide0 channel 1
ohci0 at pci0 dev 15 function 2: ServerWorks OSB4/CSB5 USB Host Controller (rev. 0x04)
ohci0: interrupting at irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
iop0: configuring...
iop0: unable to retrieve HRT
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
md0: internal 5000 KB image area
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
uhub1 at uhub0 port 1
uhub1: Dell Dell USB Keyboard Hub, class 9/0, rev 1.10/1.00, addr 2
uhub1: 3 ports with 2 removable, bus powered
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Dell Dell USB Keyboard Hub, rev 1.10/1.00, addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub1 port 1 configuration 1 interface 1atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <CRD-8482B, , 1.05> cdrom removable

uhidev1: Dell Dell USB Keyboard Hub, rev 1.10/1.00, addr 3, iclass 3/0
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2uhidev1: 3 report ids
uhid at uhidev1 reportid 1 not configured
uhid at uhidev1 reportid 2 not configured
uhid at uhidev1 reportid 3 not configured
, Ultra-DMA mode 2 (Ultra/33)
cd0(rccide0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33) (using DMA)
uhidev2 at uhub0 port 2 configuration 1 interface 0
uhidev2: Logitech Optical USB Mouse, rev 2.00/3.40, addr 4, iclass 3/1
uhid at uhidev2 not configured
scsibus1 target 6 lun 0: <ARCHIVE, Python 06408-XXX, 8130> tape removable not configured
boot device: fd0
root on md0a dumps on md0b
root file system type: ffs
warning: no /dev/console

--mP3DRpeJDSE+ciuQ--