This is a multi-part message in MIME format.
--------------060508070807000306050007
Content-Type: text/plain; charset=ISO-8859-2; format=flowed
Content-Transfer-Encoding: 7bit

Hi,

Peter Seebach wrote:
> Does NetBSD/amd64 run on EMT64 chips?  Is it stable on multiprocessor systems?
> I need to build a multiprocessor system, and the motherboard I was going to
> use has been replaced by a new board for use with EMT64 chips.
> 
> -s

here is a dmesg from a machine with 2 Xeon processors, running 
NetBSD-3.0 amd64 (distribution kernel GENERIC.MP) ...

r.

--------------060508070807000306050007
Content-Type: text/plain;
 name="dmesg.boot"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.boot"

NetBSD 3.0 (GENERIC.MP) #0: Sun Dec 18 21:55:15 UTC 2005
	builds@works.netbsd.org:/home/builds/ab/netbsd-3-0-RELEASE/amd64/200512182024Z-obj/home/builds/ab/netbsd-3-0-RELEASE/src/sys/arch/amd64/compile/GENERIC.MP
total memory = 2047 MB
avail memory = 1956 MB
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.4) (INTEL    SE7320VP20  )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2793.10 MHz
cpu0: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu0: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu0: L2 cache 1 MB 64B/line 8-way
cpu0: calibrating local timer
cpu0: apic clock running at 199 MHz
cpu0: 32 page colors
cpu1 at mainbus0: apid 6 (application processor)
cpu1: starting
cpu1:                   Intel(R) Xeon(TM) CPU 2.80GHz, 2793.00 MHz
cpu1: features: bffbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features: bffbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,NOX,B21,MMXX,MMX>
cpu1: features: bffbfbff<FXSR,SSE,SSE2,B27,B28,LONG,3DNOW>
cpu1: L2 cache 1 MB 64B/line 8-way
mpbios: bus 0 is type PCI   
mpbios: bus 1 is type PCI   
mpbios: bus 2 is type PCI   
mpbios: bus 3 is type PCI   
mpbios: bus 4 is type PCI   
mpbios: bus 5 is type ISA   
ioapic0 at mainbus0 apid 8 (I/O APIC)
ioapic0: pa 0xfec00000, version 20, 24 pins
ioapic1 at mainbus0 apid 9 (I/O APIC)
ioapic1: pa 0xfec10000, version 20, 24 pins
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x3592 (rev. 0x0c)
Intel product 0x3593 (undefined subclass 0x00, revision 0x0c) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: Intel product 0x3595 (rev. 0x0c)
pci1 at ppb0 bus 1
pci1: no spaces enabled!
ppb1 at pci0 dev 3 function 0: Intel product 0x3596 (rev. 0x0c)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
Galileo (Marvell) Technology product 0x4361 (ethernet network, revision 0x17) at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 0: Intel 6300ESB PCI-X Bridge (rev. 0x02)
pci3 at ppb2 bus 3
pci3: no spaces enabled!
uhci0 at pci0 dev 29 function 0: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci0: interrupting at ioapic0 pin 16 (irq 7)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 6300ESB USB UHCI Controller (rev. 0x02)
uhci1: interrupting at ioapic0 pin 19 (irq 7)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
Intel 6300ESB Watchdog Timer (miscellaneous system, revision 0x02) at pci0 dev 29 function 4 not configured
Intel 6300ESB Advanced Interrupt Controller (interrupt system, interface 0x20, revision 0x02) at pci0 dev 29 function 5 not configured
Intel 6300ESB USB EHCI Controller (USB serial bus, interface 0x20, revision 0x02) at pci0 dev 29 function 7 not configured
ppb3 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x0a)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
vga0 at pci4 dev 2 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wm0 at pci4 dev 3 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
wm0: interrupting at ioapic0 pin 17 (irq 7)
wm0: 32-bit 33MHz PCI bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:0e:0c:4b:d0:ed
igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: Intel 6300ESB LPC Interface Bridge (rev. 0x02)
piixide0 at pci0 dev 31 function 2
piixide0: Intel 6300ESB Serial ATA Controller (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel configured to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel configured to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
Intel 6300ESB SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
ioapic0: enabling
ioapic1: enabling
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <ST3200826AS>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd1 at atabus0 drive 1: <ST3200826AS>
wd1: drive supports 16-sector PIO transfers, LBA48 addressing
wd1: 186 GB, 387621 cyl, 16 head, 63 sec, 512 bytes/sect x 390721968 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 6 (Ultra/133)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
wd1(piixide0:0:1): using PIO mode 4, Ultra-DMA mode 6 (Ultra/133) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <SR244W, , T01A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
raid0: RAID Level 1
raid0: Components: /dev/wd0a /dev/wd1a
raid0: Total Sectors: 386527488 (188734 MB)
boot device: raid0
root on raid0a dumps on raid0b
root file system type: ffs
cpu1: CPU 6 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--------------060508070807000306050007--