Subject: Re: ural device timeout on -current
To: Kouichirou Hiratsuka <email@example.com>
From: dixie <firstname.lastname@example.org>
Date: 10/21/2005 14:49:14
Kouichirou Hiratsuka wrote:
>At Fri, 14 Oct 2005 13:15:56 +0900,
>FUKAUMI Naoki wrote:
>>At Wed, 17 Aug 2005 16:20:41 +0200,
>>>Hi there, I got a BUFFALO WLI-U2-KG54-AI, rev 2.00/1.15 succesfully
>>>attached but when I try to assign an address, either manually or via
>>>dhclient it goes on timeout.
>>>Here's the full dmesg output:
>>>ral0: timeout waiting for BBP/RF to wakeup
>>># ifconfig ral0 inet 192.168.1.15
>>>ifconfig: SIOCAIFADDR: Input/output error
>>>I'm on a 3.99.7 macppc machine.
>>>Please to/cc me because I'm not subscribed to this list.
>>I don't have WLI-U2-KG54-AI. Some devices listed in if_ural.c are not
>>tested. Some devices may not be supported by (u)ral(4).
>>I'll buy WLI-U2-KG54-AI soon and check it on my machine.
>I bought this today. It has a flash drive in order to install a
>Windows device driver. The flash drive can be disabled by the
>switch on it. If the flash drive is off, its device ID is changed
>to 0x0067. In this state, I can use it with the following patch.
> Kouichirou Hiratsuka
>--- usbdevs.orig 2005-10-20 00:42:35.000000000 +0900
>+++ usbdevs 2005-10-20 00:42:50.000000000 +0900
>@@ -1270,7 +1270,7 @@
> product MELCO KB11 0x0044 WLI-USB-KB11 WLAN
> product MELCO KG54YB 0x005e WLI-U2-KG54-YB WLAN
> product MELCO KG54 0x0066 WLI-U2-KG54 WLAN
>-product MELCO KG54AI 0x006d WLI-U2-KG54-AI WLAN
>+product MELCO KG54AI 0x0067 WLI-U2-KG54-AI WLAN
> /* Metricom products */
> product METRICOM RICOCHET_GS 0x0001 Ricochet GS
The device did not attach with the flash drive disabled so I kept it
Thank you, I'll try your patch as soon as possible :)