Subject: Re: ural device timeout on -current
To: FUKAUMI Naoki <email@example.com>
From: Kouichirou Hiratsuka <firstname.lastname@example.org>
Date: 10/20/2005 01:37:25
At Fri, 14 Oct 2005 13:15:56 +0900,
FUKAUMI Naoki wrote:
> At Wed, 17 Aug 2005 16:20:41 +0200,
> dixie wrote:
> > Hi there, I got a BUFFALO WLI-U2-KG54-AI, rev 2.00/1.15 succesfully
> > attached but when I try to assign an address, either manually or via
> > dhclient it goes on timeout.
> > Here's the full dmesg output:
> > ral0: timeout waiting for BBP/RF to wakeup
> > # ifconfig ral0 inet 192.168.1.15
> > ifconfig: SIOCAIFADDR: Input/output error
> > I'm on a 3.99.7 macppc machine.
> > Please to/cc me because I'm not subscribed to this list.
> > Thank you.
> I don't have WLI-U2-KG54-AI. Some devices listed in if_ural.c are not
> tested. Some devices may not be supported by (u)ral(4).
> I'll buy WLI-U2-KG54-AI soon and check it on my machine.
I bought this today. It has a flash drive in order to install a
Windows device driver. The flash drive can be disabled by the
switch on it. If the flash drive is off, its device ID is changed
to 0x0067. In this state, I can use it with the following patch.
--- usbdevs.orig 2005-10-20 00:42:35.000000000 +0900
+++ usbdevs 2005-10-20 00:42:50.000000000 +0900
@@ -1270,7 +1270,7 @@
product MELCO KB11 0x0044 WLI-USB-KB11 WLAN
product MELCO KG54YB 0x005e WLI-U2-KG54-YB WLAN
product MELCO KG54 0x0066 WLI-U2-KG54 WLAN
-product MELCO KG54AI 0x006d WLI-U2-KG54-AI WLAN
+product MELCO KG54AI 0x0067 WLI-U2-KG54-AI WLAN
/* Metricom products */
product METRICOM RICOCHET_GS 0x0001 Ricochet GS