--uAKRQypu60I7Lcqm
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: inline

Hi!

Today i updated my netbsd installation from 2.0.2 to current (cvs from
today). I had several problems and i hope you can help me.

Building the toolchain:

The compilation of disklabel failed because of an outdated disktab.h in
/usr/include. So i copied the version from the current-source-tree over
to /usr/include. Building the toolchain then worked. I hope this was a
"good" solution for this problem.

Postinstall:

I fixed the uid and guid issues manually, but i don't know how to fix
the problems with X11 properly. I attached the output from postintall to
this e-mail.

Etcupdate:

etcupdate failed because a file called "etcsubmit.cf" couldn't be found.
The output of etcupdate is also attached.

Kernel doesn't recognize my atheros-based WLAN-card anymore:

It's a Linksys WPC55AG (cardbus) which works fine with NetBSD 2.0.2
and FreeBSD 5.4. I attached the dmesg output of a GENERIC-kernel with
ath, PCIBIOS, PCIBIOSVERBOSE, PCIBIOS_BUS_FIXUP, PCIBIOS_INTR_FIXUP,
PCIBIOS_INTR_GUESS enabled.

Greetings
Martin
-- 
Jabber-ID: tenco@jabber.ccc.de
	http://www.jabber.org
An Anarchist FAQ Webpage:
	http://www.anarchismfaq.org

--uAKRQypu60I7Lcqm
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename=dmesg

Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 3.99.6 (RESCUE) #5: Wed Jun 15 15:26:05 CEST 2005
	root@lotophag.homeunix.net:/usr/src/sys/arch/i386/compile/RESCUE
total memory = 479 MB
avail memory = 463 MB
BIOS32 rev. 0 found at 0xe8b10
PCI BIOS rev. 2.1 found at 0xe8b24
pcibios: config mechanism [1][x], special cycles [x][x], last bus 1
PCI IRQ Routing Table rev. 1.0 found at 0xfe840, size 144 bytes (7 entries)
PCI Interrupt Router at 000:17:0 (VIA Technologies VT8231 IDE Controller compatible)
pci_intr_fixup: no compatible PCI ICU found: ICU vendor 0x1106 product 0x8231
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:09:0 0x1524 0x1410   A  0x02  11  1    fixed up
000:11:0 0x1106 0x3044   A  0x03   5  1    already assigned
000:16:0 0x1106 0x3038   A  0x01  10  1    already assigned
000:16:1 0x1106 0x3038   B  0x02  11  1    already assigned
000:16:3 0x1106 0x3104   D  0x05  11  1    already assigned
000:17:5 0x1106 0x3059   C  0x03   5  1    already assigned
000:17:6 0x1106 0x3068   C  0x03   5  1    already assigned
000:18:0 0x1106 0x3065   A  0x01  10  1    already assigned
001:00:0 0x5333 0x8d04   A  0x01  10  1    fixed up
------------------------------------------
PCI fixup examining 1106:3156
PCI fixup examining 1106:b091
PCI fixup examining 5333:8d04
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 1524:1410
PCI bridge 1: primary 0, secondary 2, subordinate 2
PCI fixup examining 1106:3044
PCI fixup examining 1106:3038
PCI fixup examining 1106:3038
PCI fixup examining 1106:3104
PCI fixup examining 1106:3177
PCI fixup examining 1106:571
PCI fixup examining 1106:3059
PCI fixup examining 1106:3068
PCI fixup examining 1106:3065
PCI bus #2 is the last bus
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP-M 2000+ (686-class), 1658.61 MHz, id 0x681
cpu0: features c3cbf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features c3cbf9ff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbf9ff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: "mobile AMD Athlon(tm) XP-M 2000+"
cpu0: I-cache 64 KB 64B/line 2-way, D-cache 64 KB 64B/line 2-way
cpu0: L2 cache 256 KB 64B/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3156 (rev. 0x00)
agp0 at pchb0: aperture at 0xa0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8633 (Apollo Pro 266) CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: S3 product 0x8d04 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
cbb0 at pci0 dev 9 function 0: ENE Technology CB1410 CardBus Controller (rev. 0x00)
VIA Technologies VT6306 IEEE 1394 Host Controller (Firewire serial bus, interface 0x10, revision 0x80) at pci0 dev 11 function 0 not configured
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci0: interrupting at irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 product 0x0000, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci1: interrupting at irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1106 product 0x0000, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3: VIA Technologies VT8237 EHCI USB Controller (rev. 0x82)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: vendor 0x1106 product 0x0000, class 9/0, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8235 ATA133 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
auvia0 at pci0 dev 17 function 5: VIA Technologies VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 5
auvia0: ac97: VIA Technologies VT1612A codec; headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
auvia0: ac97: ext id 205<AMAP,SPDIF,VRA>
audio0 at auvia0: full duplex, mmap, independent
VIA Technologies VT82C686A MC-97 Modem Controller (miscellaneous communications, revision 0x80) at pci0 dev 17 function 6 not configured
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:40:d0:3d:4b:f5
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cbb0: bad Vcc request. sock_ctrl 0x0, sock_status 0x30000a20
cbb0: disabling socket
new status 0x30000a20
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 2 device 0
pcmcia0 at cardslot0
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
attimer0 at isa0 port 0x40-0x43: AT Timer
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
pcppi0: attached to attimer0
isapnp0: no ISA Plug 'n Play devices found
Kernelized RAIDframe activated
cbb0: wait took 0.031626s
cbb0: bad Vcc request. sock_ctrl 0x30, sock_status 0x30000a69
cbb0: disabling socket
new status 0x30000a69
uhidev0 at uhub1 port 2 configuration 1 interface 0
uhidev0: Microsoft product 0x007d, rev 2.00/0.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus0 drive 0: <IC25N060ATMR04-0>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD DRIVE GCC-4240N, , 0110> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
boot device: wd0
root on wd0e dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--uAKRQypu60I7Lcqm
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename="etcupdate.log-Wed_Jun_15_13:14:59_CEST_2005"

*** WARNING: /tmp/temproot already exists

Continue previously aborted update? (y/[n]) Remove the old /tmp/temproot? (y/[n]) *** Creating /tmp/temproot
*** Populating /tmp/temproot from /usr/src/etc/
install: etcsubmit.cf: stat: No such file or directory

--uAKRQypu60I7Lcqm
Content-Type: text/plain; charset=iso-8859-15
Content-Disposition: attachment; filename="postinstall.log-Wed_Jun_15_13:14:18_CEST_2005"

Source directory: /usr/src
Target directory: //
x11 fix:
	Migrate ///usr/X11R6/lib/X11/fs to ///etc/X11/fs [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/lbxproxy to ///etc/X11/lbxproxy [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/proxymngr to ///etc/X11/proxymngr [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/rstart to ///etc/X11/rstart [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/twm to ///etc/X11/twm [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/xdm to ///etc/X11/xdm [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/xinit to ///etc/X11/xinit [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/xserver to ///etc/X11/xserver [NOT FIXED]
	Migrate ///usr/X11R6/lib/X11/xsm to ///etc/X11/xsm [NOT FIXED]
postinstall fixes passed:
postinstall fixes failed: x11

--uAKRQypu60I7Lcqm--