I have a Cisco 350 Wireless Adapter that I'm trying to use with
2.0.2 on my laptop.  Whenever I try to fetch a file via FTP the
following message is logged and ftp receives nothing:

an0: discarding oversize frame (len=1516)

Does anybody know what to do about this?  I am using a Cisco 350 Access
Point.  It is running 12.05.  This is the VxWorks version of the OS.  I
can upgrade it to the IOS version of the OS if that would help.  Here
is a full dmesg:

NetBSD 2.0.2 (JNLAP) #1: Tue Apr 26 16:47:55 PDT 2005
	jnemeth@jnlap:/sys/arch/i386/compile/JNLAP
total memory = 97724 KB
avail memory = 92680 KB
BIOS32 rev. 0 found at 0xfd820
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium II (686-class), 298.44 MHz, id 0x652
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
cpu0: I-cache 16 KB 32B/line 4-way, D-cache 16 KB 32B/line 4-way
cpu0: L2 cache 512 KB 32B/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 32 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82443BX Host Bridge/Controller (AGP disabled) (rev. 0x02)
pchb0: fixing Idle/Pipeline DRAM Leadoff Timing
cbb0 at pci0 dev 2 function 0: Texas Instruments PCI1250 PCI-CardBus Bridge (rev. 0x02)
cbb1 at pci0 dev 2 function 1: Texas Instruments PCI1250 PCI-CardBus Bridge (rev. 0x02)
vga0 at pci0 dev 3 function 0: Neomagic MagicMedia 256AV VGA (rev. 0x20)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 6 function 0
pcib0: Intel 82371AB PCI-to-ISA Bridge (PIIX4) (rev. 0x02)
piixide0 at pci0 dev 6 function 1
piixide0: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel ignored (disabled)
Intel 82371AB USB Host Controller (PIIX4) (USB serial bus, revision 0x01) at pci0 dev 6 function 2 not configured
Intel 82371AB Power Management Controller (PIIX4) (miscellaneous bridge, revision 0x02) at pci0 dev 6 function 3 not configured
cbb0: interrupting at irq 11
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 11
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
isa0 at pcib0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1: dsp v3.02
audio0 at sb0: half duplex, mmap, independent
opl0 at sb0: model OPL3
midi0 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
apm0 at mainbus0: Power Management spec V1.2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 1: <SANYO CRD-S372BV, , 1.24VA> cdrom removable
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: 3Com Corporation, 3C589D, TP/BNC LAN Card Ver. 2a, 000002
pcmcia1: Manufacturer code 0x101, product 0x589
pcmcia1: function 0: network adapter, ccr addr 10000 mask 3
pcmcia1: function 0, config table entry 1: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
pcmcia1: function 0, config table entry 3: I/O card; irq mask ffff; iomask 4, iospace 0-f; io8 io16 irqlevel
ep0 at pcmcia1 function 0: 3Com 3c589 10Mbps Ethernet
ep0: address 00:10:4b:a0:2b:20, 8KB byte-wide FIFO, 5:3 Rx:Tx split
ep0: 10baseT, 10base5, 10base2 (default 10baseT)
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
wd0 at atabus0 drive 0: <TOSHIBA MK4006MAV>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 3909 MB, 7944 cyl, 16 head, 63 sec, 512 bytes/sect x 8007552 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd0(piixide0:0:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
pcmcia1: CIS version PCMCIA 2.0 or 2.1
pcmcia1: CIS info: Cisco Systems, 350 Series Wireless LAN Adapter
pcmcia1: Manufacturer code 0x15f, product 0xa
pcmcia1: function 0: network adapter, ccr addr 3e0 mask 7
pcmcia1: function 0, config table entry 5: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqlevel
an0 at pcmcia1 function 0: Cisco Systems, 350 Series Wireless LAN Adapter
an0: Cisco Systems 350 Series (firmware 5.02.19)
an0: 802.11 address: 00:0f:8f:ef:a2:4b, channel: 1-11
an0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
an0: discarding oversize frame (len=1516)