Dear Newsgroup,

I noticed that my soundcard does not work with the current Kernel (2.0G
GENERIC/i386) from Sunday, 5th September. 
The Audio device is detected properly but no sound.
Audio works fine with my old Kernel (2.0E GENERIC/i386) anyway.

Regards, Zafer Aydogan.


dmesg:
NetBSD 2.0G (GENERIC) #0: Sat Sep  4 23:58:11 CEST 2004
        zafer@mia.aydogan.net:/usr/obj/sys/arch/i386/compile/GENERIC
total memory = 511 MB
avail memory = 493 MB
BIOS32 rev. 0 found at 0xfb0e0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 1500.10 MHz, id 0xf12
cpu0: features 3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 3febfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features 3febfbff<FXSR,SSE,SSE2,SS,HTT,TM>
cpu0: "Intel(R) Pentium(R) 4 CPU 1.50GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64B/line 4-way
cpu0: L2 cache 256 KB 64B/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82845 Host (rev. 0x03)
agp0 at pchb0: aperture at 0xd0000000, size 0x4000000
ppb0 at pci0 dev 1 function 0: Intel 82845 AGP (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev.
0x15)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0x12)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
ex0 at pci2 dev 1 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x78)
ex0: interrupting at irq 11
ex0: MAC address 00:0a:5e:1d:e3:89
exphy0 at ex0 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
cmpci0 at pci2 dev 9 function 0: C-Media Electronics, Inc. CMI8738/C3DX PCI
Audio Device (rev. 0x10)
cmpci0: interrupting at irq 5
audio0 at cmpci0: full duplex, mmap, independent
opl0 at cmpci0: model OPL3: LR swapped
midi0 at opl0: CMPCI Yamaha OPL3
mpu0 at cmpci0
midi1 at mpu0: CMPCI MPU-401 MIDI UART
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801BA LPC Interface Bridge (rev. 0x12)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801BA IDE Controller (ICH2) (rev. 0x12)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
uhci0 at pci0 dev 31 function 2: Intel 82801BA USB Controller (rev. 0x12)
uhci0: interrupting at irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
Intel 82801BA SMBus Controller (SMBus serial bus, revision 0x12) at pci0 dev
31 function 3 not configured
uhci1 at pci0 dev 31 function 4: Intel 82801BA USB Controller (rev. 0x12)
uhci1: interrupting at irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
wd0 at atabus0 drive 0: <WDC WD400EB-00CPF0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38166 MB, 77545 cyl, 16 head, 63 sec, 512 bytes/sect x 78165360 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA
data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <LTN526D, , YSR5> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <Hewlett-Packard CD-Writer Plus 8100, YMW3D6Y0RU,
1.0g> cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 3, DMA mode 1
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
cd1(piixide0:1:1): using PIO mode 0, DMA mode 1 (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)