Subject: Re: hyperthreading and MP
To: None <mlh@goathill.org>
From: Brian Stark <bpstark@pacbell.net>
List: current-users
Date: 06/26/2004 01:08:19
mlh@goathill.org wrote:
> I tried several times to build an ACPI enabled kernel for this and
> it gets part-way through booting the kernel and hard starts back to
> the bios.
Hi,
Getting NetBSD to recognize the hyperthreading capability of my system
took several iterations of building new kernels and testing. My system
is a Dell Inspiron 5150. I will post the output from dmesg and my kernel
config below. Not sure if they will be helpful to you, but at least you
can see what is working for me...
Brian Stark
bpstark at pacbell dot net
Here is the output from dmesg:
NetBSD 2.0F (REDSTONE.ACPI) #3: Fri Jun 25 21:41:00 PDT 2004
bstark@redstone.private.net:/usr/src/sys/arch/i386/compile/REDSTONE.ACPI
total memory = 255 MB
avail memory = 240 MB
BIOS32 rev. 0 found at 0xffe90
mainbus0 (root)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel Pentium 4 (686-class), 3056.59 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: features2 4400<CID>
cpu0: "Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz"
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: using thermal monitor 1
cpu0: calibrating local timer
cpu0: apic clock running at 132 MHz
cpu0: 16 page colors
cpu0: kstack at 0xc68b2000 for 16384 bytes
cpu0: idle pcb at 0xc68b2000, idle sp at 0xc68b5f98
cpu1 at mainbus0: apid 1 (application processor)
cpu1: starting
cpu1: Intel Pentium 4 (686-class), 3056.50 MHz, id 0xf29
cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu1: features2 4400<CID>
cpu1: "Mobile Intel(R) Pentium(R) 4 CPU 3.06GHz"
cpu1: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu1: L2 cache 512 KB 64b/line 8-way
cpu1: ITLB 4K/4M: 64 entries
cpu1: DTLB 4K/4M: 64 entries
cpu1: using thermal monitor 1
cpu1: kstack at 0xc68be000 for 16384 bytes
cpu1: idle pcb at 0xc68be000, idle sp at 0xc68c1f98
ioapic0 at mainbus0 apid 2 (I/O APIC)
ioapic0: pa 0xfec00000, virtual wire mode, version 20, 24 pins
ioapic0: misconfigured as apic 0
ioapic0: remapped to apic 2
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <DELL , CPi R ,27d30c0a>, AslId <ASL ,00000061>
acpi0: SCI interrupting at int 9
mpacpi: could not get bus number, assuming bus 0
mpacpi: found root PCI bus 0 at level 1
mpacpi: found subordinate bus 1 at level 2
mpacpi: found subordinate bus 2 at level 2
mpacpi: 3 PCI busses
mpacpi: configuring PCI bus 0 int routing
mpacpi: configuring PCI bus 1 int routing
mpacpi: configuring PCI bus 2 int routing
ioapic0: pin 2 attached to isa0 irq 0 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 1 attached to isa0 irq 1 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 3 attached to isa0 irq 3 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 4 attached to isa0 irq 4 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 5 attached to isa0 irq 5 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 6 attached to isa0 irq 6 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 7 attached to isa0 irq 7 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 8 attached to isa0 irq 8 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 9 attached to isa0 irq 9 (type 0<type=0> flags d<pol=1=Act Hi,trig=3=Level>)
ioapic0: pin 10 attached to isa0 irq 10 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 11 attached to isa0 irq 11 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 12 attached to isa0 irq 12 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 13 attached to isa0 irq 13 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 14 attached to isa0 irq 14 (type 0<type=0> flags 0<pol=0,trig=0>)
ioapic0: pin 15 attached to isa0 irq 15 (type 0<type=0> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
local apic: pin 1 attached to NMI (type 1<type=1=NMI> flags 0<pol=0,trig=0>)
ioapic0: pin 16 attached to pci0 device 31 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 31 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 31 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 31 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 29 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci0 device 29 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci0 device 29 INT_C (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 23 attached to pci0 device 29 INT_D (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci0 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 20 attached to pci1 device 0 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 4 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 16 attached to pci2 device 4 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 18 attached to pci2 device 2 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 19 attached to pci2 device 2 INT_B (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ioapic0: pin 17 attached to pci2 device 1 INT_A (type 0<type=0> flags f<pol=3=Act Lo,trig=3=Level>)
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
acpibut1 at acpi0 (PNP0C0E): ACPI Sleep Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0C01 at acpi0 not configured
pckbc1 at acpi0 (PNP0F13): aux port
pckbc1: irq 12
pckbc2 at acpi0 (PNP0303): kbd port
pckbc2: io 0x60,0x64,0x62,0x66 irq 1
PNP0B00 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C01 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xff irq 13
npx1: using exception 16
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
acpitz0: passive cooling mode only
acpitz0: critical 78.0C
pckbd0 at pckbc2 (kbd slot)
pckbc2: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc2 (aux slot)
pckbc2: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82855GM Host-to-Hub Controller (rev. 0x02)
agp0 at pchb0: can't find internal VGA device config space
Intel 82855GM GMCH Memory Controller (miscellaneous system, revision 0x02) at pci0 dev 0 function 1 not configured
Intel 82855GM GMCH Configuration Process (miscellaneous system, revision 0x02) at pci0 dev 0 function 3 not configured
ppb0 at pci0 dev 1 function 0: Intel product 0x3581 (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation product 0x0324 (rev. 0xa1)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
uhci0 at pci0 dev 29 function 0: Intel 82801DB/DBM USB UHCI Controller #1 (rev. 0x01)
uhci0: interrupting at ioapic0 pin 16 (irq 11)
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801DB/DBM USB UHCI Controller #2 (rev. 0x01)
uhci1: interrupting at ioapic0 pin 19 (irq 11)
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801DB/DBM USB UHCI Controller #3 (rev. 0x01)
uhci2: interrupting at ioapic0 pin 18 (irq 11)
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7: Intel 82801DB/DBM USB EHCI Controller (rev. 0x01)
ehci0: interrupting at ioapic0 pin 23 (irq 11)
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
ppb1 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x81)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
bce0 at pci2 dev 1 function 0: Broadcom BCM4401 10/100 Ethernet
bce0: interrupting at ioapic0 pin 17 (irq 11)
ukphy0 at bce0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000818, model 0x0036, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bce0: Ethernet address 00:0d:56:b1:2a:f9
cbb0 at pci2 dev 4 function 0: Texas Instruments PCI4510 PCI-CardBus Bridge w/ OHCI IEEE 1394 Controller (rev. 0x02)
Texas Instruments PCI4510 OHCI IEEE 1394 HOST Controller w/ PCI-CardBus Bridge (Firewire serial bus, interface 0x10) at pci2 dev 4 function 1 not configured
cbb0: interrupting at ioapic0 pin 16 (irq 11)
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801DB ISA Bridge (rev. 0x01)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801DBM IDE Controller (ICH4-M) (rev. 0x01)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
atabus1 at piixide0 channel 1
auich0 at pci0 dev 31 function 5: i82801DB/DBM (ICH4/ICH4M) AC-97 Audio
auich0: interrupting at ioapic0 pin 17 (irq 11)
auich0: ac97: SigmaTel STAC9750/51 codec; headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
auich0: ac97: ext id 601<AC97_22,AMAP,VRA>
Intel 82801DB/DBM AC97 Modem Controller (modem communications, revision 0x01) at pci0 dev 31 function 6 not configured
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
cpu0: prelint0 700<vector=0,delmode=7,dest=0> 0<target=0>
cpu0: prelint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: timer0 300c0<vector=c0,delmode=0,masked,dest=0> 0<target=0>
cpu0: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu0: lint0 10700<vector=0,delmode=7,masked,dest=0> 0<target=0>
cpu0: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu0: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
ioapic0: enabling
ioapic0: int1 190<vector=90,delmode=1,dest=0> 0<target=0>
ioapic0: int9 81a0<vector=a0,delmode=1,level,dest=0> 0<target=0>
ioapic0: int12 191<vector=91,delmode=1,dest=0> 0<target=0>
ioapic0: int14 164<vector=64,delmode=1,dest=0> 0<target=0>
ioapic0: int15 165<vector=65,delmode=1,dest=0> 0<target=0>
ioapic0: int16 a160<vector=60,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int17 a170<vector=70,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int18 a162<vector=62,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int19 a161<vector=61,delmode=1,actlo,level,dest=0> 0<target=0>
ioapic0: int23 b163<vector=63,delmode=1,pending,actlo,level,dest=0> 0<target=0>
auich0: measured ac97 link rate at 49450 Hz, will use 48000 Hz
audio0 at auich0: full duplex, mmap, independent
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
wi0 at pcmcia0 function 0: NETGEAR MA401RA Wireless PC, Card, ISL37300PEval-RevA
wi0: 802.11 address 00:09:5b:49:fc:88
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HL-DT-STCD-RW/DVD-ROM GCC-4241N, , A100> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
ehci0: handing over low speed device on port 3 to uhci1
uhub3: port 3, device disappeared after reset
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0, rev 1.10/2.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
wd0 at atabus1 drive 0: <HTS726060M9AT00>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 57231 MB, 116280 cyl, 16 head, 63 sec, 512 bytes/sect x 117210240 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
cpu1: prelint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: prelint1 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: timer0 200c0<vector=c0,delmode=0,dest=0> 0<target=0>
cpu1: pcint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: lint1 400<vector=0,delmode=4,dest=0> 0<target=0>
cpu1: err0 10000<vector=0,delmode=0,masked,dest=0> 0<target=0>
cpu1: CPU 1 running
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
Here is the contents of my kernel config "REDSTONE.ACPI" (this will
include the contents of kernel config file "REDSTONE" which will be
presented after this):
# $NetBSD: GENERIC.MP,v 1.4 2003/03/05 10:28:00 grant Exp $
#
# GENERIC.MP -- Generic, plus enable Multiprocessor support.
#
include "arch/i386/conf/REDSTONE"
options MULTIPROCESSOR
options COM_MPLOCK # com MP locking; REQUIRED on MP i386
ioapic* at mainbus?
#options APM_NO_IDLE
options DIAGNOSTIC # STRONGLY RECOMMENDED
#options LOCKDEBUG
options MPDEBUG
options MPVERBOSE
#options DEBUG
# Advanced Control and Power Interface
# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options MPBIOS # configure CPUs and APICs using MPBIOS
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
options MPACPI # configure CPUs and APICs using ACPI
# (acpi at mainbus must also be enabled)
options MPACPI_SCANPCI # find PCI roots using MPACPI
acpi0 at mainbus0
options ACPI_PCI_FIXUP # PCI interrupt routing via ACPI
options ACPI_ACTIVATE_DEV # If set, activate inactive devices
# ACPI devices
acpiacad* at acpi? # ACPI AC Adapter
acpibat* at acpi? # ACPI Battery
acpibut* at acpi? # ACPI Button
acpiec* at acpi? # ACPI Embedded Controller
acpilid* at acpi? # ACPI Lid Switch
acpitz* at acpi? # ACPI Thermal Zone
# Mainboard devices
com* at acpi? # Serial communications interface
#fdc* at acpi? # Floppy disk controller
lpt* at acpi? # Parallel port
npx* at acpi? # Math coprocessor
pckbc* at acpi? # PC keyboard controller
#wss* at acpi? # NeoMagic 256AV in wss mode
# Sony Vaio jog dial
#spic* at acpi? # Sony Programmable I/O Controller
#wsmouse* at spic?
# Toshiba Libretto devices
#vald* at acpi?
Here is the contents of my kernel config "REDSTONE":
# $NetBSD: GENERIC,v 1.592 2004/01/16 17:02:05 perry Exp $
#
# GENERIC machine description file
#
# This machine description file is used to generate the default NetBSD
# kernel. The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page. For further information about kernel options
# for this architecture, see the options(4) man page. For an explanation
# of each device driver in this file see the section 4 man page for the
# device.
include "arch/i386/conf/std.i386"
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
#ident "GENERIC-$Revision: 1.9 $"
maxusers 32 # estimated number of users
# CPU support. At least one is REQUIRED.
options I386_CPU
options I486_CPU
options I586_CPU
options I686_CPU
# CPU-related options.
#options MATH_EMULATE # floating point emulation
options VM86 # virtual 8086 emulation
options USER_LDT # user-settable LDT; used by WINE
# insert delay no-ops in interrupts; recommended on very old machines
#options PIC_DELAY
# Enhanced SpeedStep Technology in the Pentium M
options ENHANCED_SPEEDSTEP
options MTRR # memory-type range register syscall support
# doesn't work with MP just yet..
#options PERFCTRS # performance-monitoring counters support
# delay between "rebooting ..." message and hardware reset, in milliseconds
#options CPURESET_DELAY=2000
# This option allows you to force a serial console at the specified
# I/O address. see console(4) for details.
#options CONSDEVNAME="\"com\"",CONADDR=0x2f8,CONSPEED=57600
# you don't want the option below ON iff you are using the
# serial console option of the new boot strap code.
#options CONS_OVERRIDE # Always use above! independent of boot info
# The following options override the memory sizes passed in from the boot
# block. Use them *only* if the boot block is unable to determine the correct
# values. Note that the BIOS may *correctly* report less than 640k of base
# memory if the extended BIOS data area is located at the top of base memory
# (as is the case on most recent systems).
#options REALBASEMEM=639 # size of base memory (in KB)
#options REALEXTMEM=15360 # size of extended memory (in KB)
# Standard system options
options INSECURE # disable kernel security levels - X needs this
# San Diego uses 420 during the summer, 480 during the winter.
options RTC_OFFSET=420 # hardware clock is this many mins. west of GMT
options NTP # NTP phase/frequency locked loop
#options NO_TSC_TIME # Don't use TSC microtime, even if available.
# Improves time behavior under VMware.
options KTRACE # system call tracing via ktrace(1)
options SYSTRACE # system call vetting via systrace(1)
options SYSVMSG # System V-like message queues
options SYSVSEM # System V-like semaphores
options SEMMNI=256 # number of semaphore identifiers
options SEMMNS=2048 # number of semaphores in system
options SEMUME=256 # max number of undo entries per process
options SEMMNU=1024 # number of undo structures in system
options SYSVSHM # System V-like memory sharing
options SHMMAXPGS=32768 # 2048 pages is the default
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
options LKM # loadable kernel modules
options USERCONF # userconf(4) support
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
# Beep when it is safe to power down the system (requires sysbeep)
#options BEEP_ONHALT
# Some tunable details of the above feature (default values used below)
#options BEEP_ONHALT_COUNT=3 # Times to beep
#options BEEP_ONHALT_PITCH=1500 # Default frequency (in Hz)
#options BEEP_ONHALT_PERIOD=250 # Default duration (in msecs)
# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Likely stable but not yet the default.
#options NEW_BUFQ_STRATEGY
# Diagnostic/debugging support options
#options DIAGNOSTIC # expensive kernel consistency checks
#options DEBUG # expensive debugging checks/support
options KMEMSTATS # kernel memory statistics (vmstat -m)
options DDB # in-kernel debugger
#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
options DDB_HISTORY_SIZE=512 # enable history editing in DDB
#options KGDB # remote debugger
#options KGDB_DEVNAME="\"com\"",KGDB_DEVADDR=0x3f8,KGDB_DEVRATE=9600
#makeoptions DEBUG="-g" # compile full symbol table
# Compatibility options
#options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI
#options COMPAT_09 # NetBSD 0.9
#options COMPAT_10 # NetBSD 1.0
#options COMPAT_11 # NetBSD 1.1
#options COMPAT_12 # NetBSD 1.2, 386BSD, and BSDI
#options COMPAT_13 # NetBSD 1.3, 386BSD, and BSDI
#options COMPAT_14 # NetBSD 1.4
options COMPAT_15 # NetBSD 1.5
options COMPAT_16 # NetBSD 1.6
#options COMPAT_43 # 4.3BSD, 386BSD, and BSDI
#options COMPAT_386BSD_MBRPART # recognize old partition ID
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
options COMPAT_SVR4 # binary compatibility with SVR4
options COMPAT_IBCS2 # binary compatibility with SCO and ISC
options COMPAT_LINUX # binary compatibility with Linux
options COMPAT_FREEBSD # binary compatibility with FreeBSD
#options COMPAT_MACH # binary compatibility with Mach binaries
#options COMPAT_DARWIN # binary compatibility with Darwin binaries
#options EXEC_MACHO # exec MACH-O binaries
#options COMPAT_PECOFF # kernel support to run Win32 apps
# File systems
file-system FFS # UFS
file-system EXT2FS # second extended file system (linux)
file-system LFS # log-structured file system
file-system MFS # memory file system
file-system NFS # Network File System client
file-system NTFS # Windows/NT file system (experimental)
file-system CD9660 # ISO 9660 + Rock Ridge file system
file-system MSDOSFS # MS-DOS file system
file-system FDESC # /dev/fd
file-system KERNFS # /kern
file-system NULLFS # loopback file system
file-system OVERLAY # overlay file system
file-system PORTAL # portal filesystem (still experimental)
file-system PROCFS # /proc
file-system UMAPFS # NULLFS + uid and gid remapping
file-system UNION # union file system
file-system CODA # Coda File System; also needs vcoda (below)
file-system SMBFS # experimental - CIFS; also needs nsmb (below)
# File system options
options QUOTA # UFS quotas
#options FFS_EI # FFS Endian Independent support
options SOFTDEP # FFS soft updates support.
options NFSSERVER # Network File System server
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
# immutable) behave as system flags.
# Networking options
#options GATEWAY # packet forwarding
options INET # IP + ICMP + TCP + UDP
options INET6 # IPV6
options IPSEC # IP security
options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
#options IPSEC_DEBUG # debug for IP security
#options MROUTING # IP multicast routing
options NS # XNS
#options NSIP # XNS tunneling over IP
options ISO,TPIP # OSI
#options EON # OSI tunneling over IP
options CCITT,LLC,HDLC # X.25
options NETATALK # AppleTalk networking protocols
options PPP_BSDCOMP # BSD-Compress compression support for PPP
options PPP_DEFLATE # Deflate compression support for PPP
options PPP_FILTER # Active filter support for PPP (requires bpf)
options PFIL_HOOKS # pfil(9) packet filter hooks
options IPFILTER_LOG # ipmon(8) log support
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
# These options enable verbose messages for several subsystems.
# Warning, these may compile large string tables into the kernel!
#options ACPIVERBOSE # verbose ACPI device autoconfig messages
#options EISAVERBOSE # verbose EISA device autoconfig messages
options MIIVERBOSE # verbose PHY autoconfig messages
options PCIVERBOSE # verbose PCI device autoconfig messages
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
#options PCMCIAVERBOSE # verbose PCMCIA configuration messages
options SCSIVERBOSE # human readable SCSI error messages
options USBVERBOSE # verbose USB device autoconfig messages
#options PNPBIOSVERBOSE # verbose PnP BIOS messages
#options PNPBIOSDEBUG # more fulsome PnP BIOS debugging messages
#options I2OVERBOSE # verbose I2O driver messages
#options MCAVERBOSE # verbose MCA device autoconfig messages
options NFS_BOOT_DHCP,NFS_BOOT_BOOTPARAM
#
# wscons options
#
# builtin terminal emulations
#options WSEMUL_SUN # sun terminal emulation
options WSEMUL_VT100 # VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options WS_KERNEL_FG=WSCOL_WHITE
#options WS_KERNEL_BG=WSCOL_BLACK
# compatibility to other console drivers
options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
options WSDISPLAY_COMPAT_USL # VT handling
options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options PCDISPLAY_SOFTCURSOR
# modify the screen type of the console; defaults to "80x25"
#options VGA_CONSOLE_SCREENTYPE="\"80x24\""
# work around a hardware bug that loaded fonts don't work; found on ATI cards
#options VGA_CONSOLE_ATI_BROKEN_FONTSEL
# the following enables some functions to get mouse console support.
# if you want a really secure system, it may be better not to enable them,
# see wsmoused(8), section SECURITY CONSIDERATIONS for more info.
#options WSDISPLAY_CHARFUNCS # mouse console support
# enable VGA raster mode capable of displaying multilingual text on console
#options VGA_RASTERCONSOLE
# Kernel root file system and dump configuration.
config netbsd root on ? type ?
#config netbsd root on sd0a type ffs
#config netbsd root on ? type nfs
#
# Device configuration
#
mainbus0 at root
cpu* at mainbus?
#ioapic* at mainbus?
# Doesn't do anything yet.
#p64h2apic* at pci? dev? function? # P64H2 IOxAPIC
#apm0 at mainbus0 # Advanced power management
# Tuning for power management, see apm(4) for more details.
#options APM_NO_IDLE # Don't call BIOS CPU idle function
#options APM_V10_ONLY # Use only the APM 1.0 calls
#options APM_NO_POWEROFF # Don't power off on halt(8)
#options APM_POWER_PRINT # Print stats on the console
#options APM_DISABLE_INTERRUPTS=0 # Don't disable interrupts
# Basic Bus Support
# Advanced Control and Power Interface
# This option can be used to retrieve CPU and APIC information.
# that I/O APICs can be used if ACPI is enabled below.
# To use the I/O APIC(s), enable the ioapic line above.
#options MPBIOS # configure CPUs and APICs using MPBIOS
#options MPBIOS_SCANPCI # find PCI roots using MPBIOS
#options MPACPI # configure CPUs and APICs using ACPI
# (acpi at mainbus must also be enabled)
#options MPACPI_SCANPCI # find PCI roots using MPACPI
#acpi0 at mainbus0
#options ACPI_PCI_FIXUP # PCI interrupt routing via ACPI
#options ACPI_ACTIVATE_DEV # If set, activate inactive devices
#options ACPICA_PEDANTIC # force strict conformance to the Spec.
# ACPI devices
#acpiacad* at acpi? # ACPI AC Adapter
#acpibat* at acpi? # ACPI Battery
#acpibut* at acpi? # ACPI Button
#acpiec* at acpi? # ACPI Embedded Controller
#acpilid* at acpi? # ACPI Lid Switch
#acpitz* at acpi? # ACPI Thermal Zone
# Mainboard devices
#com* at acpi? # Serial communications interface
#fdc* at acpi? # Floppy disk controller
#lpt* at acpi? # Parallel port
#npx* at acpi? # Math coprocessor
#pckbc* at acpi? # PC keyboard controller
#wss* at acpi? # NeoMagic 256AV in wss mode
# Sony Vaio jog dial
#spic* at acpi? # Sony Programmable I/O Controller
#wsmouse* at spic?
# Toshiba Libretto devices
#vald* at acpi?
# Plug-and-Play BIOS and attached devices
#pnpbios* at mainbus?
# mainboard audio chips
#ess* at pnpbios? index ? # ESS AudioDrive
#sb* at pnpbios? index ? # NeoMagic 256AV in sb mode
#wss* at pnpbios? index ? # NeoMagic 256AV in wss mode
#ym* at pnpbios? index ? # OPL3-SA3
# com port
# If enabled, consider changing "com0", "com1", and "com2" under "ISA Serial
# Interfaces" to "com*", otherwise com2 will attach at pnpbios? and there
# will be no com0. A side effect is pcmcia (and other) com? previously
# starting at com3 may attach as com1 or com2.
#com* at pnpbios? index ? # serial ports
# parallel port
# The above "com*" comments apply, cf. "lpt0" under "ISA parallel
# "printer interfaces".
#lpt* at pnpbios? index ? # parallel ports
#pckbc* at pnpbios? index ? # PC keyboard/mouse controller
#fdc* at pnpbios? index ? # floppy controller
# IDE controller on Toshiba Portege 3000 series (crippled PCI device)
#pciide* at pnpbios? index ?
# PCI bus support
pci* at mainbus? bus ?
pci* at pchb? bus ?
pci* at ppb? bus ?
# Configure PCI using BIOS information
#options PCIBIOS # PCI BIOS support
#options PCIBIOSVERBOSE # PCI BIOS verbose info
#options PCIBIOS_ADDR_FIXUP # fixup PCI I/O addresses
#options PCIBIOS_BUS_FIXUP # fixup PCI bus numbering
#options PCIBIOS_INTR_FIXUP # fixup PCI interrupt routing
#options PCIBIOS_IRQS_HINT=0x0a00 # PCI interrupts hint. IRQ 9 or 11
#options PCIBIOS_INTR_GUESS # see pcibios(4)
#options PCIINTR_DEBUG # super-verbose PCI interrupt fixup
# System Controllers
elansc* at pci? dev ? function ? # AMD Elan SC520 System Controller
# PCI bridges
pchb* at pci? dev ? function ? # PCI-Host bridges
pceb* at pci? dev ? function ? # PCI-EISA bridges
pcib* at pci? dev ? function ? # PCI-ISA bridges
pcmb* at pci? dev ? function ? # PCI-MCA bridges
ppb* at pci? dev ? function ? # PCI-PCI bridges
# XXX 'puc's aren't really bridges, but there's no better place for them here
puc* at pci? dev ? function ? # PCI "universal" comm. cards
agp* at pchb?
# EISA bus support
eisa0 at mainbus?
eisa0 at pceb?
# ISA bus support
isa0 at mainbus?
isa0 at pceb?
isa0 at pcib?
# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?
pcmcia* at tcic? controller ? socket ?
# MCA bus support
#mca0 at mainbus?
# ISA PCMCIA controllers
pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000
pcic1 at isa? port 0x3e2 iomem 0xe0000 iosiz 0x4000
pcic2 at isa? port 0x3e4 iomem 0xe0000 iosiz 0x4000
tcic0 at isa? port 0x240 iomem 0xd0000 iosiz 0x10000
# PCI PCMCIA controllers
pcic0 at pci? dev? function ?
# ISA Plug-and-Play bus support
#isapnp0 at isa?
# ISA Plug-and-Play PCMCIA controllers
#pcic* at isapnp?
# CardBus bridge support
cbb* at pci? dev ? function ?
cardslot* at cbb?
# CardBus bus support
cardbus* at cardslot?
pcmcia* at cardslot?
# Coprocessor Support
# Math Coprocessor support
npx0 at isa? port 0xf0 irq 13 # x86 math coprocessor
# Console Devices
# ISA console
#pc0 at isa? port 0x60 irq 1 # pccons generic PC console driver
# Keyboard layout configuration for pccons
#options FRENCH_KBD
#options FINNISH_KBD
#options GERMAN_KBD
#options NORWEGIAN_KBD
# pccons-specific options:
#options XSERVER_DDB # PF12 gets you into DDB when X is running
#options XSERVER # X server support
# wscons
pckbc0 at isa? # pc keyboard controller
pckbd* at pckbc? # PC keyboard
pms* at pckbc? # PS/2 mouse for wsmouse
#options PMS_DISABLE_POWERHOOK # Disable PS/2 reset on resume
vga0 at isa?
vga* at pci? dev ? function ?
pcdisplay0 at isa? # CGA, MDA, EGA, HGA
#machfb* at pci? dev ? function ? # ATI Mach64 framebuffer driver
wsdisplay* at vga? console ?
wsdisplay* at pcdisplay? console ?
#wsdisplay* at machfb? console ?
wskbd* at pckbd? console ?
wsmouse* at pms? mux 0
pcppi0 at isa?
sysbeep0 at pcppi?
# Serial Devices
# PCI serial interfaces
com* at puc? port ? # 16x50s on "universal" comm boards
cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards
cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards
# ISA Plug-and-Play serial interfaces
#com* at isapnp? # Modems and serial boards
# PCMCIA serial interfaces
com* at pcmcia? function ? # Modems and serial cards
pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards
com* at pcmcom? slave ? # ...and the slave devices
# CardBus serial interfaces
#com* at cardbus? dev ? function ? # Modems and serial cards
# ISA serial interfaces
#options COM_HAYESP # adds Hayes ESP serial board support
com0 at isa? port 0x3f8 irq 4 # Standard PC serial ports
com1 at isa? port 0x2f8 irq 3
com2 at isa? port 0x3e8 irq 5
#com3 at isa? port 0x2e8 irq 9
#ast0 at isa? port 0x1a0 irq 5 # AST 4-port serial cards
#com* at ast? slave ?
#boca0 at isa? port 0x100 irq 5 # BOCA 8-port serial cards
#boca0 at isa? port 0x100 irq 5 # BOCA 16-port serial cards (BB2016)
#boca1 at isa? port 0x140 irq 5 # this line is also needed for BB2016
#com* at boca? slave ?
#tcom0 at isa? port 0x100 irq 7 # TC-800 8-port serial cards
#com* at tcom? slave ?
#rtfps0 at isa? port 0x1230 irq 10 # RT 4-port serial cards
#com* at rtfps? slave ?
#cy0 at isa? iomem 0xd4000 irq 12 # Cyclades serial cards
#addcom0 at isa? port 0x108 irq 5 # Addonics FlexPort 8S
#com* at addcom? slave ?
#moxa0 at isa? port 0x100 irq 5 # MOXA C168H serial card (experimental)
#com* at moxa? slave ?
# MCA serial interfaces
#com* at mca? slot ? # 16x50s on comm boards
# Parallel Printer Interfaces
# PCI parallel printer interfaces
lpt* at puc? port ? # || ports on "universal" comm boards
# ISA parallel printer interfaces
lpt0 at isa? port 0x378 irq 7 # standard PC parallel ports
lpt1 at isa? port 0x278
lpt2 at isa? port 0x3bc
# Hardware monitors
# LM7[89] and compatible hardware monitors
#lm0 at isa? port 0x290 # other common ports: 0x280, 0x310
# VIA VT82C686A hardware monitor
#viapm* at pci? dev ? function ?
#viaenv* at viapm?
# I2O devices
iop* at pci? dev ? function ? # I/O processor
iopsp* at iop? tid ? # SCSI/FC-AL ports
ld* at iop? tid ? # block devices
dpti* at iop? tid 0 # DPT/Adaptec control interface
# SCSI Controllers and Devices
# PCI SCSI controllers
adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI
ahd* at pci? dev ? function ? # Adaptec 29320, 39320 (aic790x) SCSI
bha* at pci? dev ? function ? # BusLogic 9xx SCSI
dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID
iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI
isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel
mly* at pci? dev ? function ? # Mylex AcceleRAID and eXtremeRAID
mpt* at pci? dev ? function ? # LSI Fusion SCSI/FC
pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI
siop* at pci? dev ? function ? # Symbios 53c8xx SCSI
esiop* at pci? dev ? function ? # Symbios 53c875 SCSI and newer
#options SIOP_SYMLED # drive the act. LED in software
trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI
# EISA SCSI controllers
ahb* at eisa? slot ? # Adaptec 174[02] SCSI
ahc* at eisa? slot ? # Adaptec 274x, aic7770 SCSI
bha* at eisa? slot ? # BusLogic 7xx SCSI
dpt* at eisa? slot ? # DPT EATA SCSI
uha* at eisa? slot ? # UltraStor 24f SCSI
# PCMCIA SCSI controllers
aic* at pcmcia? function ? # Adaptec APA-1460 SCSI
esp* at pcmcia? function ? # Qlogic ESP406/FAS408 SCSI
# ISA Plug-and-Play SCSI controllers
#aha* at isapnp? # Adaptec AHA-154[02
#aic* at isapnp? # Adaptec AHA-1520B
# ISA SCSI controllers
#adv0 at isa? port ? irq ? drq ? # AdvanSys APB-514[02] SCSI
#aha0 at isa? port 0x330 irq ? drq ? # Adaptec 154[02] SCSI
#aha1 at isa? port 0x334 irq ? drq ?
#ahc0 at isa? port ? irq ? # Adaptec 284x SCSI
#aic0 at isa? port 0x340 irq 11 # Adaptec 152[02] SCSI
#bha0 at isa? port 0x330 irq ? drq ? # BusLogic [457]4X SCSI
#bha1 at isa? port 0x334 irq ? drq ?
# The "nca" and "dpt" probes might give false hits or hang your machine.
#dpt0 at isa? port 0x170 irq ? drq ? # DPT SmartCache/SmartRAID
#nca0 at isa? port 0x360 irq 15 # Port-mapped NCR 53C80 controller
#nca1 at isa? iomem 0xd8000 irq 5 # Memory-mapped controller (T128, etc.)
#sea0 at isa? iomem 0xc8000 irq 5 # Seagate/Future Domain SCSI
#uha0 at isa? port 0x330 irq ? drq ? # UltraStor [13]4f SCSI
#uha1 at isa? port 0x340 irq ? drq ?
#wds0 at isa? port 0x350 irq 15 drq 6 # WD7000 and TMC-7000 controllers
#wds1 at isa? port 0x358 irq 11 drq 5
# CardBus SCSI cards
#adv* at cardbus? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI
#ahc* at cardbus? dev ? function ? # Adaptec ADP-1480
# MCA SCSI cards
#aha* at mca? slot ? # Adaptec AHA-1640
# SCSI bus support
scsibus* at scsi?
# SCSI devices
sd* at scsibus? target ? lun ? # SCSI disk drives
st* at scsibus? target ? lun ? # SCSI tape drives
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
ch* at scsibus? target ? lun ? # SCSI autochangers
ses* at scsibus? target ? lun ? # SCSI Enclosure Services devices
ss* at scsibus? target ? lun ? # SCSI scanners
uk* at scsibus? target ? lun ? # SCSI unknown
# RAID controllers and devices
aac* at pci? dev ? function ? # Adaptec AAC family
amr* at pci? dev ? function ? # AMI/LSI Logic MegaRAID
cac* at eisa? slot ? # Compaq EISA array controllers
cac* at pci? dev ? function ? # Compaq PCI array controllers
icp* at pci? dev ? function ? # ICP-Vortex GDT & Intel RAID
mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family
mlx* at eisa? slot ? # Mylex DAC960 & DEC SWXCR family
twe* at pci? dev ? function ? # 3ware Escalade RAID controllers
ld* at aac? unit ? # logical disk devices
ld* at amr? unit ?
ld* at cac? unit ?
ld* at icp? unit ?
ld* at twe? unit ?
ld* at mlx? unit ?
icpsp* at icp? unit ? # SCSI pass-through
# IDE and related devices
# PCI IDE controllers - see pciide(4) for supported hardware.
# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
# how to set up DMA modes for this chip. This may work, or may cause
# a machine hang with some controllers.
pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
acardide* at pci? dev ? function ? # Acard IDE controllers
aceride* at pci? dev ? function ? # Acer Lab IDE controllers
artsata* at pci? dev ? function ? # Intel i31244 SATA controller
cmdide* at pci? dev ? function ? # CMD tech IDE controllers
cypide* at pci? dev ? function ? # Cypress IDE controllers
hptide* at pci? dev ? function ? # Triones/HighPoint IDE controllers
optiide* at pci? dev ? function ? # Opti IDE controllers
piixide* at pci? dev ? function ? # Intel IDE controllers
pdcide* at pci? dev ? function ? # Promise IDE controllers
rccide* at pci? dev ? function ? # ServerWorks IDE controllers
satalink* at pci? dev ? function ? # SiI SATALink controllers
siside* at pci? dev ? function ? # SiS IDE controllers
slide* at pci? dev ? function ? # Symphony Labs IDE controllers
stpcide* at pci? dev ? function ? # STMicro STPC IDE controllers
viaide* at pci? dev ? function ? # VIA/AMD/Nvidia IDE controllers
# ISA Plug-and-Play IDE controllers
#wdc* at isapnp?
# PCMCIA IDE controllers
wdc* at pcmcia? function ?
# ISA ST506, ESDI, and IDE controllers
# Use flags 0x01 if you want to try to use 32bits data I/O (the driver will
# fall back to 16bits I/O if 32bits I/O are not functional).
# Some controllers pass the initial 32bit test, but will fail later.
wdc0 at isa? port 0x1f0 irq 14 flags 0x00
wdc1 at isa? port 0x170 irq 15 flags 0x00
# ATA (IDE) bus support
atabus* at ata?
# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd* at atabus? drive ? flags 0x0000
# ATA RAID configuration support, as found on some Promise controllers.
pseudo-device ataraid
ld* at ataraid? vendtype ? unit ?
# ATAPI bus support
atapibus* at atapi?
# ATAPI devices
# flags have the same meaning as for IDE drives.
cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
st* at atapibus? drive ? flags 0x0000 # ATAPI tape drives
uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown
# Miscellaneous mass storage devices
# ISA floppy
fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers
#fdc1 at isa? port 0x370 irq ? drq ?
fd* at fdc? drive ? # the drives themselves
# some machines need you to do this instead of fd*
#fd0 at fdc0 drive 0
# ISA CD-ROM devices
#mcd0 at isa? port 0x300 irq 10 # Mitsumi CD-ROM drives
# ISA tape devices
# note: the wt driver conflicts unpleasantly with SMC boards at the
# same I/O address. The probe reprograms their EEPROMs. Don't
# uncomment it unless you are actually using it.
#wt0 at isa? port 0x308 irq 5 drq 1 # Archive and Wangtek QIC tape drives
# MCA ESDI devices
#edc* at mca? slot ? # IBM ESDI Disk Controllers
#ed* at edc?
# Network Interfaces
# PCI network interfaces
an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11)
#ath* at pci? dev ? function ? # Atheros 5210/5211/5212 802.11
atw* at pci? dev ? function ? # ADMtek ADM8211 (802.11)
bce* at pci? dev ? function ? # Broadcom 4401 10/100 Ethernet
bge* at pci? dev ? function ? # Broadcom 570x gigabit Ethernet
en* at pci? dev ? function ? # ENI/Adaptec ATM
ep* at pci? dev ? function ? # 3Com 3c59x
epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet
esh* at pci? dev ? function ? # Essential HIPPI card
ex* at pci? dev ? function ? # 3Com 90x[BC]
fpa* at pci? dev ? function ? # DEC DEFPA FDDI
fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B
gsip* at pci? dev ? function ? # NS83820 Gigabit Ethernet
#hme* at pci? dev ? function ? # Sun Microelectronics STP2002-STQ
le* at pci? dev ? function ? # PCnet-PCI Ethernet
lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3
mtd* at pci? dev ? function ? # Myson MTD803 3-in-1 Ethernet
ne* at pci? dev ? function ? # NE2000-compatible Ethernet
ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial
pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet
rtk* at pci? dev ? function ? # Realtek 8129/8139
sf* at pci? dev ? function ? # Adaptec AIC-6915 Ethernet
sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet
skc* at pci? dev ? function ? # SysKonnect SK9821 Gigabit Ethernet
sk* at skc? # SysKonnect SK9821 Gigabit Ethernet
ste* at pci? dev ? function ? # Sundance ST-201 Ethernet
stge* at pci? dev ? function ? # Sundance/Tamarack TC9021 Gigabit
ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet
tl* at pci? dev ? function ? # ThunderLAN-based Ethernet
tlp* at pci? dev ? function ? # DECchip 21x4x and clones
vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet
wi* at pci? dev ? function ? # Intersil Prism Mini-PCI (802.11b)
wm* at pci? dev ? function ? # Intel 8254x gigabit
# EISA network interfaces
#ep* at eisa? slot ? # 3Com 3c579 Ethernet
#fea* at eisa? slot ? # DEC DEFEA FDDI
#tlp* at eisa? slot ? # DEC DE-425 Ethernet
# ISA Plug-and-Play network interfaces
#an* at isapnp? # Aironet 802.11
#ep* at isapnp? # 3Com 3c509 Ethernet
#fmv* at isapnp? # Fujitsu FMV-183
#le* at isapnp? # AMD PCnet-ISA Ethernet
#ne* at isapnp? # NE2000-compatible Ethernet
#tr* at isapnp? # IBM/3COM TROPIC Token-Ring
# PCMCIA network interfaces
an* at pcmcia? function ? # Aironet PC4500/PC4800 (802.11)
awi* at pcmcia? function ? # BayStack 650/660 (802.11FH/DS)
cnw* at pcmcia? function ? # Xircom/Netwave AirSurfer
ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet
mbe* at pcmcia? function ? # MB8696x based Ethernet
ne* at pcmcia? function ? # NE2000-compatible Ethernet
ray* at pcmcia? function ? # Raytheon Raylink (802.11)
sm* at pcmcia? function ? # Megahertz Ethernet
# tr at pcmcia has problems with Cardbus bridges
#tr* at pcmcia? function ? # TROPIC based Token-Ring
wi* at pcmcia? function ? # Lucent/Intersil WaveLan IEEE (802.11)
xi* at pcmcia? function ? # Xircom CreditCard Ethernet
mhzc* at pcmcia? function ? # Megahertz Ethernet/Modem combo cards
com* at mhzc?
sm* at mhzc?
# ISA network interfaces
#ate0 at isa? port 0x2a0 irq ? # AT1700
#cs0 at isa? port 0x300 iomem ? irq ? drq ? # CS8900 Ethernet
#ec0 at isa? port 0x250 iomem 0xd8000 irq 9 # 3Com 3c503 Ethernet
#eg0 at isa? port 0x280 irq 9 # 3C505 ethernet cards
#el0 at isa? port 0x300 irq 9 # 3C501 ethernet cards
#ep* at isa? port ? irq ? # 3C509 ethernet cards
#ef0 at isa? port 0x360 iomem 0xd0000 irq 7 # 3C507
#ai0 at isa? port 0x360 iomem 0xd0000 irq 7 # StarLAN
#fmv0 at isa? port 0x2a0 irq ? # FMV-181/182
#ix0 at isa? port 0x300 irq 10 # EtherExpress/16
#iy0 at isa? port 0x360 irq ? # EtherExpress PRO 10 ISA
#lc0 at isa? port 0x320 iomem ? irq ? # DEC EtherWORKS III (LEMAC)
#depca0 at isa? port 0x300 iomem 0xc8000 iosiz 0x8000 irq 5 # DEPCA
#le* at depca?
#nele0 at isa? port 0x320 irq 9 drq 7 # NE2100
#le* at nele?
#ntwoc0 at isa? port 0x300 irq 5 iomem 0xc8000 flags 1 # Riscom/N2 sync serial
#bicc0 at isa? port 0x320 irq 10 drq 7 # BICC IsoLan
#le* at bicc?
#ne0 at isa? port 0x280 irq 9 # NE[12]000 ethernet cards
#ne1 at isa? port 0x300 irq 10
#sm0 at isa? port 0x300 irq 10 # SMC91C9x Ethernet
#tr0 at isa? port 0xa20 iomem 0xd8000 irq ? # IBM TROPIC based Token-Ring
#tr1 at isa? port 0xa24 iomem 0xd0000 irq ? # IBM TROPIC based Token-Ring
#tr* at isa? port ? irq ? # 3COM TROPIC based Token-Ring
#we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet
#we1 at isa? port 0x300 iomem 0xcc000 irq 10
# CardBus network cards
#ath* at cardbus? dev ? function ? # Atheros 5210/5211/5212 802.11
#atw* at cardbus? dev ? function ? # ADMtek ADM8211 (802.11)
#ex* at cardbus? dev ? function ? # 3Com 3C575TX
#fxp* at cardbus? dev ? function ? # Intel i8255x
#rtk* at cardbus? dev ? function ? # Realtek 8129/8139
#tlp* at cardbus? dev ? function ? # DECchip 21143
# MCA network cards
#elmc* at mca? slot ? # 3Com EtherLink/MC (3c523)
#ep* at mca? slot ? # 3Com EtherLink III (3c529)
#we* at mca? slot ? # WD/SMC Ethernet
#ate* at mca? slot ? # Allied Telesis AT1720
#ne* at mca? slot ? # Novell NE/2 and clones
#tr* at mca? slot ? # IBM Token Ring adapter
#le* at mca? slot ? # SKNET Personal/MC2+
# MII/PHY support
acphy* at mii? phy ? # Altima AC101 and AMD Am79c874 PHYs
amhphy* at mii? phy ? # AMD 79c901 Ethernet PHYs
bmtphy* at mii? phy ? # Broadcom BCM5201 and BCM5202 PHYs
brgphy* at mii? phy ? # Broadcom BCM5400-family PHYs
dmphy* at mii? phy ? # Davicom DM9101 PHYs
exphy* at mii? phy ? # 3Com internal PHYs
gentbi* at mii? phy ? # Generic Ten-Bit 1000BASE-[CLS]X PHYs
glxtphy* at mii? phy ? # Level One LXT-1000 PHYs
gphyter* at mii? phy ? # NS83861 Gig-E PHY
icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x
igphy* at mii? phy ? # Intel IGP01E1000
inphy* at mii? phy ? # Intel 82555 PHYs
iophy* at mii? phy ? # Intel 82553 PHYs
lxtphy* at mii? phy ? # Level One LXT-970 PHYs
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
nsphy* at mii? phy ? # NS83840 PHYs
nsphyter* at mii? phy ? # NS83843 PHYs
pnaphy* at mii? phy ? # generic HomePNA PHYs
qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs
sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs
tlphy* at mii? phy ? # ThunderLAN PHYs
tqphy* at mii? phy ? # TDK Semiconductor PHYs
ukphy* at mii? phy ? # generic unknown PHYs
urlphy* at mii? phy ? # Realtek RTL8150L internal PHYs
# USB Controller and Devices
# PCI USB controllers
# The EHCI is not ready for prime time.
ehci* at pci? dev ? function ? # Enhanced Host Controller
ohci* at pci? dev ? function ? # Open Host Controller
uhci* at pci? dev ? function ? # Universal Host Controller (Intel)
# CardBus USB controllers
ehci* at cardbus? dev ? function ? # Enhanced Host Controller
#ohci* at cardbus? dev ? function ? # Open Host Controller
# ISA USB controllers
#slhci0 at isa? port 0x300 irq 5 # ScanLogic SL811HS
# USB bus support
usb* at ehci?
usb* at ohci?
usb* at uhci?
#usb* at slhci?
# USB Hubs
uhub* at usb?
uhub* at uhub? port ? configuration ? interface ?
# USB HID device
uhidev* at uhub? port ? configuration ? interface ?
# USB Mice
ums* at uhidev? reportid ?
wsmouse* at ums? mux 0
# USB Keyboards
ukbd* at uhidev? reportid ?
wskbd* at ukbd? console ? mux 1
# USB Generic HID devices
uhid* at uhidev? reportid ?
# USB Printer
ulpt* at uhub? port ? configuration ? interface ?
# USB Modem
umodem* at uhub? port ? configuration ?
ucom* at umodem?
# USB Mass Storage
umass* at uhub? port ? configuration ? interface ?
#wd* at umass?
# USB audio
uaudio* at uhub? port ? configuration ?
# USB MIDI
umidi* at uhub? port ? configuration ?
# USB IrDA
# USB-IrDA bridge spec
uirda* at uhub? port ? configuration ? interface ?
irframe* at uirda?
# SigmaTel STIr4200 USB/IrDA Bridge
ustir* at uhub? port ?
irframe* at ustir?
# USB Ethernet adapters
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
cue* at uhub? port ? # CATC USB-EL1201A based adapters
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
uax* at uhub? port ? # ASIX AX88172 based adapters
udav* at uhub? port ? # Davicom DM9601 based adapters
url* at uhub? port ? # Realtek RTL8150L based adapters
# Prolific PL2301/PL2302 host-to-host adapter
upl* at uhub? port ?
# Serial adapters
ubsa* at uhub? port ? # Belkin serial adapter
ucom* at ubsa? portno ?
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
ucom* at uftdi? portno ?
umct* at uhub? port ? # MCT USB-RS232 serial adapter
ucom* at umct? portno ?
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
ucom* at uplcom? portno ?
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
ucom* at uvscom? portno ?
# Diamond Multimedia Rio 500
urio* at uhub? port ?
# USB Handspring Visor
uvisor* at uhub? port ?
ucom* at uvisor?
# USB scanners
uscanner* at uhub? port ?
# USB scanners that use SCSI emulation, e.g., HP5300
usscanner* at uhub? port ?
# Y@P firmware loader
uyap* at uhub? port ?
# D-Link DSB-R100 USB radio
udsbr* at uhub? port ?
radio* at udsbr?
# USB Generic driver
ugen* at uhub? port ?
# IrDA and Consumer Ir devices
# Toshiba Oboe
oboe* at pci? dev ? function ?
irframe* at oboe?
# PCI IEEE1394 controllers
#fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller
# CardBus IEEE1394 controllers
#fwohci* at cardbus? dev ? function ? # IEEE1394 Open Host Controller
#fw* at fwbus? # IP over 1394
# IEEE1394 nodes
#fwnode* at fwbus? idhi ? idlo ?
#sbpscsi* at fwnode?
#scsibus* at sbpscsi?
# Audio Devices
# PCI audio devices
auich* at pci? dev ? function ? # Intel ICH integrated AC'97 Audio
autri* at pci? dev ? function ? # Trident 4DWAVE based AC'97 Audio
auvia* at pci? dev ? function ? # VIA VT82C686A integrated AC'97 Audio
clcs* at pci? dev ? function ? # Cirrus Logic CS4280
clct* at pci? dev ? function ? # Cirrus Logic CS4281
cmpci* at pci? dev ? function ? # C-Media CMI8338/8738
eap* at pci? dev ? function ? # Ensoniq AudioPCI
emuxki* at pci? dev ? function ? # Creative SBLive! and PCI512
esa* at pci? dev ? function ? # ESS Allegro-1 / Maestro-3 PCI Audio
esm* at pci? dev ? function ? # ESS Maestro-1/2/2e PCI Audio Accelerator
eso* at pci? dev ? function ? # ESS Solo-1 PCI AudioDrive
fms* at pci? dev ? function ? # Forte Media FM801
neo* at pci? dev ? function ? # NeoMagic 256 AC'97 Audio
sv* at pci? dev ? function ? # S3 SonicVibes
yds* at pci? dev ? function ? # Yamaha DS-1 PCI Audio
# ISA Plug-and-Play audio devices
#ess* at isapnp? # ESS Tech ES1887, ES1888, ES888 audio
#guspnp* at isapnp? # Gravis Ultra Sound PnP audio
#sb* at isapnp? # SoundBlaster-compatible audio
#wss* at isapnp? # Windows Sound System
#ym* at isapnp? # Yamaha OPL3-SA3 audio
# ISA audio devices
# the "aria" probe might give false hits
#aria0 at isa? port 0x290 irq 10 # Aria
#ess0 at isa? port 0x220 irq 5 drq 1 drq2 5 # ESS 18XX
#gus0 at isa? port 0x220 irq 7 drq 1 drq2 6 # Gravis Ultra Sound
#pas0 at isa? port 0x220 irq 7 drq 1 # ProAudio Spectrum
#pss0 at isa? port 0x220 irq 7 drq 6 # Personal Sound System
#sp0 at pss0 port 0x530 irq 10 drq 0 # sound port driver
#sb0 at isa? port 0x220 irq 5 drq 1 drq2 5 # SoundBlaster
#wss0 at isa? port 0x530 irq 10 drq 0 drq2 1 # Windows Sound System
# PCMCIA audio devices
#esl* at pcmcia? function ? # ESS 1688 AudioDrive
#cms0 at isa? port 0x220 # Creative Music System
# OPL[23] FM synthesizers
#opl0 at isa? port 0x388 # use only if not attached to sound card
opl* at cmpci? flags 1
#opl* at esl?
opl* at eso?
#opl* at ess?
opl* at fms?
#opl* at sb?
opl* at sv?
#opl* at wss?
opl* at yds?
#opl* at ym?
# Audio support
audio* at audiobus?
# MPU 401 UARTs
#mpu* at isa? port 0x330 irq 9 # MPU401 or compatible card
mpu* at cmpci?
mpu* at eso?
mpu* at fms?
#mpu* at sb?
mpu* at yds?
#mpu* at ym?
# MIDI support
midi* at midibus?
midi* at pcppi? # MIDI interface to the PC speaker
# The spkr driver provides a simple tone interface to the built in speaker.
#spkr0 at pcppi? # PC speaker
# FM-Radio devices
# ISA radio devices
#az0 at isa? port 0x350 # Aztech/PackardBell FM Radio Card
#az1 at isa? port 0x358
#rt0 at isa? port 0x20c # AIMS Lab Radiotrack & compatible
#rt1 at isa? port 0x284
#rt2 at isa? port 0x30c
#rt3 at isa? port 0x384
#rtii0 at isa? port 0x20c # AIMS Lab Radiotrack II FM Radio Card
#rtii1 at isa? port 0x30c
#sf2r0 at isa? port 0x384 # SoundForte RadioLink SF16-FMR2 FM Radio Card
# PCI radio devices
#gtp* at pci? dev ? function ? # Guillemot Maxi Radio FM 2000 Radio Card
# Radio support
#radio* at az?
#radio* at gtp?
#radio* at rt?
#radio* at rtii?
#radio* at sf2r?
# TV cards
# Brooktree 848/849/878/879 based TV cards
#bktr* at pci? dev ? function ?
#radio* at bktr?
# Mice
# ISA busmice
lms0 at isa? port 0x23c irq 5 # Logitech bus mouse
lms1 at isa? port 0x238 irq 5
mms0 at isa? port 0x23c irq 5 # Microsoft InPort mouse
mms1 at isa? port 0x238 irq 5
wsmouse* at lms? mux 0
wsmouse* at mms? mux 0
# Cryptographic Devices
# PCI cryptographic devices
hifn* at pci? dev ? function ? # Hifn 7755/7811/795x
ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x
# Joysticks
#joy* at pnpbios? index ? # Game port
# ISA Plug-and-Play joysticks
#joy* at isapnp? # Game ports (usually on audio cards)
# PCI joysticks
#joy* at pci? # Game ports (usually on audio cards)
#joy* at eso? # ESS Solo-1 on-board joystick
# ISA joysticks. Probe is a little strange; add only if you have one.
#joy0 at isa? port 0x201
# Miscellaneous Devices
# Planetconnect Satellite receiver driver.
#satlink0 at isa? port 0x300 drq 1
# Middle Digital, Inc. PCI-Weasel serial console board control
# devices (watchdog timer, etc.)
#weasel* at pci?
# Pull in optional local configuration
include "arch/i386/conf/GENERIC.local"
# Pseudo-Devices
pseudo-device crypto # opencrypto framework
# disk/mass storage pseudo-devices
pseudo-device ccd 4 # concatenated/striped disk devices
#pseudo-device cgd 4 # cryptographic disk devices
pseudo-device raid 8 # RAIDframe disk driver
options RAID_AUTOCONFIG # auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options RF_INCLUDE_EVENODD=1
#options RF_INCLUDE_RAID5_RS=1
#options RF_INCLUDE_PARITYLOGGING=1
#options RF_INCLUDE_CHAINDECLUSTER=1
#options RF_INCLUDE_INTERDECLUSTER=1
#options RF_INCLUDE_PARITY_DECLUSTERING=1
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
# Vinum
# pseudo-device vinum 8 # Vinum
# options VINUMDEBUG
pseudo-device md 1 # memory disk device (ramdisk)
pseudo-device vnd 4 # disk-like interface to files
# network pseudo-devices
pseudo-device bpfilter 8 # Berkeley packet filter
pseudo-device ipfilter # IP filter (firewall) and NAT
pseudo-device loop # network loopback
pseudo-device ppp 2 # Point-to-Point Protocol
pseudo-device pppoe # PPP over Ethernet (RFC 2516)
pseudo-device sl 2 # Serial Line IP
pseudo-device strip 2 # Starmode Radio IP (Metricom)
pseudo-device irframetty # IrDA frame line discipline
pseudo-device tun 2 # network tunneling over tty
pseudo-device gre 2 # generic L3 over IP tunnel
pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device faith 1 # IPv[46] tcp relay translation i/f
pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
pseudo-device vlan # IEEE 802.1q encapsulation
pseudo-device bridge # simple inter-network bridging
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
# miscellaneous pseudo-devices
pseudo-device pty # pseudo-terminals
pseudo-device tb 1 # tablet line discipline
pseudo-device sequencer 1 # MIDI sequencer
# rnd works; RND_COM does not on port i386 yet.
pseudo-device rnd # /dev/random and in-kernel generator
#options RND_COM # use "com" randomness as well (BROKEN)
pseudo-device clockctl # user control of clock subsystem
# a pseudo device needed for Coda # also needs CODA (above)
pseudo-device vcoda 4 # coda minicache <-> venus comm.
# a pseudo device needed for SMBFS
pseudo-device nsmb # experimental - SMB requester
# wscons pseudo-devices
pseudo-device wsmux # mouse & keyboard multiplexor
pseudo-device wsfont
pseudo-device ksyms # /dev/ksyms