On Thu, 29 Apr 2004 23:20:59 +0000 (UTC)
tron@zhadum.de (Matthias Scheler) wrote:


> Could you please
> post the complete output of "dmesg" from your system?

Here it is:
NetBSD 2.0C (PHEISAR) #1: Sun Apr 25 22:15:22 UTC 2004
        goteki@pheisar:/usr/obj/sys/arch/i386/compile/PHEISAR
total memory = 319 MB
avail memory = 308 MB
BIOS32 rev. 0 found at 0xfb220
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Celeron (686-class), 902.13 MHz, id 0x68a
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 128 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 8 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20040211
acpi0: X/RSDT: OemId <VIA694,AWRDACPI,42302e31>, AslId <AWRD,00000000>
acpi0: SCI interrupting at int 11
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0C01 at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0401 at acpi0 not configured
PNP0F13 at acpi0 not configured
PNP0303 at acpi0 not configured
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x1106 product 0x0691 (rev. 0xc4)
gp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: vendor 0x1106 product 0x8598 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x8086 product 0x7800 (rev. 0x21)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x1106 product 0x0686 (rev. 0x40)
viaide0 at pci0 dev 7 function 1
viaide0: VIA Technologies VT82C686A (Apollo KX133) ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
uhci0 at pci0 dev 7 function 2: vendor 0x1106 product 0x3038 (rev. 0x1a)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 7 function 3: vendor 0x1106 product 0x3038 (rev. 0x1a)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: vendor 0x1106 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
viapm0 at pci0 dev 7 function 4
viaenv0 at viapm0
auvia0 at pci0 dev 7 function 5: VIA Technologies VT82C686A AC'97 Audio (rev 0x5
0)
auvia0: interrupting at irq 10
auvia0: ac97: ICEnsemble ICE1232/VT1611A codec; headphone, 18 bit DAC, 18 bit AD
C, KS Waves 3D
auvia0: ac97: ext id 201<AMAP,VRA>
audio0 at auvia0: full duplex, mmap, independent
rtk0 at pci0 dev 8 function 0: Realtek 8139 10/100BaseTX
rtk0: interrupting at irq 11
rtk0: Ethernet address 00:02:44:4a:37:69
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
emuxki0 at pci0 dev 9 function 0: vendor 0x1102 product 0x0002 (audio multimedia
, revision 0x07)
emuxki0: interrupting at irq 5
emuxki0: ac97: EMC40 codec; 18 bit DAC, 18 bit ADC, no 3D stereo
emuxki0: ac97: ext id 280<AMAP,SDAC>
audio1 at emuxki0: full duplex, mmap, independent
joy0 at pci0 dev 9 function 1: vendor 0x1102 product 0x7002 (rev 0x07)
joy0: joystick not connected
bktr0 at pci0 dev 10 function 0
bktr0: interrupting at irq 10
bktr0: Pinnacle/Miro TV, Temic NTSC tuner.
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
got probe interrupt
got probe interrupt
fdprobe: got intr
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
got probe interrupt
fdprobe: got intr
IPsec: Initialized Security Association Processing.
wd0 at atabus0 drive 0: <ST3120022A>
wd0: drive supports 16-sector PIO transfers, LBA48 addressing
wd0: 111 GB, 232581 cyl, 16 head, 63 sec, 512 bytes/sect x 234441648 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data
 transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <Hewlett-Packard CD-Writer Plus 8100, PJX1NDSM5G, 1.0g
> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 3, DMA mode 1
cd1 at atapibus0 drive 1: <Pioneer DVD-ROM ATAPIModel DVD-116  012, , E1.22> cdr
om removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
cd0(viaide0:1:0): using PIO mode 3, DMA mode 1 (using DMA data transfers)
cd1(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data 
transfers)
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)


-
Rui Paulo <goteki@pixeloverflow.com>
3F1E DB64 40B0 B027 1F3C  4A4A 1384 42C6 B05A DCB7

  "Simplicity is the ultimate 
    sophistication." 
    -- Leonardo da Vinci