> I can build, prod and poke different builds quite easily if anyone has code
> to test...
> 

Sorry, should have included my errata.  Maybe I really need to figure out
how to do a send_pr...

>> NetBSD/i386 BIOS Boot, Revision 3.1
>> (peter@zipper, Tue Mar 23 15:12:10 CST 2004)
>> Memory: 638/261120 k
Press return to boot now, any other key for boot menu
booting hd0a:netbsd - starting in 0
6648376+146756+495000 [368672+329840]=0x7a05f8
WARNING: memory map entry overlaps with ``Compatibility Holes'':
0xe0000/0x10000/0x1
BIOS CFG: Model-SubM-Rev: 00-00-00, 0x0
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.6ZL (GENERIC.MP) #4: Wed Mar 24 11:23:59 CST 2004
        
root@zipper:/usr/peter/i386/obj/usr/src/sys/arch/i386/compile/GENERIC.MP
total memory = 255 MB
avail memory = 242 MB
sysctl_createv: rnode NULL
sysctl_createv: rnode NULL
sysctl_createv: rnode NULL
sysctl_createv: rnode NULL
BIOS32 rev. 0 found at 0xfbe10
mainbus0 (root)
mainbus0: Intel MP Specification (Version 1.1) (HP       XX          )
cpu0 at mainbus0: apid 1 (boot processor)
cpu0: Intel Pentium Pro (686-class), 199.76 MHz, id 0x617
cpu0: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features fbff<PGE,MCA,CMOV>
cpu0: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu0: L2 cache 256 KB 32b/line 4-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: calibrating local timer
cpu0: apic clock running at 66 MHz
cpu0: 16 page colors
cpu1 at mainbus0: apid 0 (application processor)
cpu1: starting
cpu1: Intel Pentium Pro (686-class), 199.74 MHz, id 0x619
cpu1: features fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu1: features fbff<PGE,MCA,CMOV>
cpu1: I-cache 8 KB 32b/line 4-way, D-cache 8 KB 32b/line 2-way
cpu1: L2 cache 256 KB 32b/line 4-way
cpu1: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu1: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
mpbios: bus 1 is type ISA
mpbios: bus 0 is type PCI
ioapic0 at mainbus0 apid 16 (I/O APIC)
ioapic0: pa 0xfec00000, version 11, 16 pins
ioapic0: misconfigured as apic 0
ioapic0: can't remap to apid 16
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pcib0 at pci0 dev 0 function 0
pcib0: Intel 82378ZB System I/O (SIO) (rev. 0x88)
cmdide0 at pci0 dev 1 function 0
cmdide0: CMD Technology PCI0646 (rev. 0x01)
cmdide0: bus-master DMA support present
cmdide0: primary channel configured to compatibility mode
cmdide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
atabus0 at cmdide0 channel 0
cmdide0: secondary channel configured to compatibility mode
cmdide0: secondary channel ignored (disabled)
ahc1 at pci0 dev 2 function 0: Adaptec aic7880 Ultra SCSI adapter
ahc1: interrupting at ioapic0 pin 9 (irq 9)
ahc1: Using left over BIOS settings
ahc1: aic7880: Ultra Single Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc1: 8 targets, 8 luns per target
vga1 at pci0 dev 11 function 0: Avance Logic (2nd PCI Vendor ID) product
0x2064 (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1
wsmux1: connecting to wsdisplay0
3D Labs GLINT DELTA (Co-processor processor, revision 0x01) at pci0 dev 11
function 1 not configured
3D Labs GLINT 500TX (miscellaneous display, revision 0x01) at pci0 dev 11
function 2 not configured
ex0 at pci0 dev 13 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex0: interrupting at ioapic0 pin 11 (irq 11)
ex0: MAC address 00:60:97:6e:8a:67
nsphy0 at ex0 phy 24: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ex1 at pci0 dev 14 function 0: 3Com 3c905-TX 10/100 Ethernet (rev. 0x0)
ex1: interrupting at ioapic0 pin 11 (irq 11)
ex1: MAC address 00:60:97:67:73:d5
nsphy1 at ex1 phy 24: DP83840 10/100 media interface, rev. 1
nsphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Intel 82451KX/GX Memory Controller (MC) (RAM memory, revision 0x04) at pci0
dev 20 function 0 not configured
pchb0 at pci0 dev 25 function 0
pchb0: Intel 82454KX/GX PCI Bridge (PB) (rev. 0x04)
pchb0: Compatibility PB (bus 0)
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
wskbd0: connecting to wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
sb0 at isa0 port 0x220-0x237 irq 5 drq 1,5: dsp v4.13
audio0 at sb0: full duplex, mmap, independent
midi0 at sb0: SB MIDI UART
opl0 at sb0: model OPL3
midi1 at opl0: SB Yamaha OPL3
pcppi0 at isa0 port 0x61
midi2 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
ioapic0: enabling
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
atapibus0 at atabus0: 2 targets
cd0 at atapibus0 drive 0: <HITACHI CDR-8130, , 0021> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
cd0(cmdide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
ahc1:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-out phase, at SEQADDR 0x16b
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xc0, ARG_2 = 0x3
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xb6] ERROR[0x0] SCSIBUSL[0x1] LASTPHASE[0xa0]
SCSISEQ[0x12] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x7] SSTAT1[0x3] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x88]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0xe7 0x0 0x0 0x195
SCB count = 16
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries: 
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
  0 SCB_CONTROL[0x40] SCB_SCSIID[0x7]
SCB_LUN[0x0] SCB_TAG[0xf]
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
Pending list: 
 15 SCB_CONTROL[0x40] SCB_SCSIID[0x7]
SCB_LUN[0x0] 
Kernel Free SCB list: 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(0): 15 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
sg[0] - Addr 0x1845e94 : Length 36
ahc1:BDR message in message buffer
ahc1:SCB 0xf - timed out
>>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
ahc1: Dumping Card State in Message-in phase, at SEQADDR 0x16b
Card was paused
ACCUM = 0xa0, SINDEX = 0x61, DINDEX = 0xc0, ARG_2 = 0x3
HCNT = 0x0 SCBPTR = 0x0
SCSISIGI[0xe6] ERROR[0x0] SCSIBUSL[0x1] LASTPHASE[0xe0]
SCSISEQ[0x12] SBLKCTL[0x0] SCSIRATE[0x0] SEQCTL[0x10]
SEQ_FLAGS[0x40] SSTAT0[0x7] SSTAT1[0x3] SSTAT2[0x0]
SSTAT3[0x0] SIMODE0[0x0] SIMODE1[0xac] SXFRCTL0[0x88]
DFCNTRL[0x4] DFSTATUS[0x6d]
STACK: 0xe7 0x0 0x0 0x195
SCB count = 16
Kernel NEXTQSCB = 14
Card NEXTQSCB = 14
QINFIFO entries: 
Waiting Queue entries:
Disconnected Queue entries:
QOUTFIFO entries: 
Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Sequencer SCB Info:
  0 SCB_CONTROL[0x40] SCB_SCSIID[0x7]
SCB_LUN[0x0] SCB_TAG[0xf]
  1 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  2 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  3 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  4 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  5 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  6 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  7 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  8 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
  9 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff]
SCB_LUN[0xff] SCB_TAG[0xff]
Pending list: 
 15 SCB_CONTROL[0x40] SCB_SCSIID[0x7]
SCB_LUN[0x0] 
Kernel Free SCB list: 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Untagged Q(0): 15 

<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
sg[0] - Addr 0x1845e94 : Length 36
probe(ahc1:0:0:0): ahc1: no longer in timeout, status = 0
ahc1: Issued Channel A Bus Reset. 1 SCBs aborted