I don't know if this is related, but on my router, I've been running
-current for a while (well, -not-so-current now (1.6R)), and statd
occasionally (once a week or month) spits out:

Jan 24 05:08:48 morbo rpc.statd: invalid hostname to sm_stat: ^Xw^??^Xw^??^=
Zw^??^Zw^??%8x%8x%8x%8x%8x%8x%8x%8x%8x%62716x%hn%51859x%hn^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^=
P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P=
^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P^P

This is with sources from Sun Apr 13 22:35:35 CEST 2003, so it's a bit
dated.

David S.(davids@idiom.com)@2004.01.24 14:00:57 +0000:
>=20
> I re-built i386-current with sources updated last evening=20
> (23 January, US/Pacific) and now 'rpc.statd' is spitting out=20
> the error message
>=20
> 	Jan 24 13:46:51 goldfinger rpc.statd: Failed to contact host ^A^B^C^D^E^=
F^G: RPC: Unknown host
>=20
> pretty much constantly.  Running it in the foreground with the
> "-d" flag doesn't seem to reveal anything.  The error messages
> are filling up my logs, but otherwise it seems to be working fine.
>=20
> 'dmesg' output below.
>=20
> David S.
>=20
> --------------------------
>=20
>=20
> NetBSD 1.6ZH (LOCAL-23-01-2004) #0: Sat Jan 24 00:16:12 PST 2004
> 	dgs@goldfinger:/vol/00/tmp/obj/sys/arch/i386/compile/LOCAL-23-01-2004
> total memory =3D 255 MB
> avail memory =3D 242 MB
> BIOS32 rev. 0 found at 0xfb4a0
> mainbus0 (root)
> cpu0 at mainbus0: (uniprocessor)
> cpu0: AMD Duron (686-class), 1204.89 MHz, id 0x671
> cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
> cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
> cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
> cpu0: L2 cache 64 KB 64b/line 16-way
> cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associ=
ative
> cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
> cpu0: 8 page colors
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
> agp0 at pchb0: aperture at 0xd8000000, size 0x10000000
> ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge (re=
v. 0x00)
> pci1 at ppb0 bus 1
> pci1: i/o space, memory space enabled
> vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX (rev. 0xb2)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> ppb1 at pci0 dev 9 function 0: Digital Equipment DECchip 21152 PCI-PCI Br=
idge (rev. 0x03)
> pci2 at ppb1 bus 2
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> fxp0 at pci2 dev 4 function 0: i82558 Ethernet, rev 5
> fxp0: interrupting at irq 11
> fxp0: Ethernet address 00:03:47:b2:1a:4a
> inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fxp1 at pci2 dev 5 function 0: i82558 Ethernet, rev 5
> fxp1: interrupting at irq 5
> fxp1: Ethernet address 00:03:47:b2:1a:4b
> inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
> inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> ahc1 at pci0 dev 13 function 0: Adaptec 29160 Ultra160 SCSI adapter
> ahc1: interrupting at irq 11
> ahc1: aic7892: Ultra160 Wide Channel A, SCSI Id=3D7, 32/253 SCBs
> scsibus0 at ahc1: 16 targets, 8 luns per target
> eap0 at pci0 dev 15 function 0: Ensoniq CT5880 CT5880-C (rev. 0x02)
> eap0: interrupting at irq 11
> eap0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel =
3D
> eap0: ac97: ext id 200<AMAP>
> audio0 at eap0: full duplex, mmap, independent
> midi0 at eap0: AudioPCI MIDI UART
> pcib0 at pci0 dev 17 function 0
> pcib0: VIA Technologies VT8233 PCI-ISA Bridge (rev. 0x00)
> viaide0 at pci0 dev 17 function 1
> viaide0: VIA Technologies VT8233 ATA100 controller
> viaide0: bus-master DMA support present
> viaide0: primary channel configured to compatibility mode
> viaide0: primary channel interrupting at irq 14
> atabus0 at viaide0 channel 0
> viaide0: secondary channel configured to compatibility mode
> viaide0: secondary channel interrupting at irq 15
> atabus1 at viaide0 channel 1
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi1 at pcppi0: PC speaker
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> isapnp0: no ISA Plug 'n Play devices found
> fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
> Kernelized RAIDframe activated
> IPsec: Initialized Security Association Processing.
> scsibus0: waiting 2 seconds for devices to settle...
> wd0 at atabus0 drive 0: <WDC WD200BB-00AUA1>
> wd0: drive supports 16-sector PIO transfers, LBA addressing
> wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sect=
ors
> wd0: 32-bit data port
> wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd1 at atabus0 drive 1: <IC35L080AVVA07-0>
> wd1: drive supports 16-sector PIO transfers, LBA addressing
> wd1: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 se=
ctors
> wd1: 32-bit data port
> wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA data transfers)
> wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA data transfers)
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 1: <DM166D DVD-ROM, , 100B> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> wd2 at atabus1 drive 0: <SAMSUNG SV2001H>
> wd2: drive supports 16-sector PIO transfers, LBA addressing
> wd2: 19130 MB, 38869 cyl, 16 head, 63 sec, 512 bytes/sect x 39179952 sect=
ors
> wd2: 32-bit data port
> wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
> wd2(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using D=
MA data transfers)
> cd0(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DM=
A data transfers)
> sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318436LW, 0010> disk fixed
> sd0: 17522 MB, 14384 cyl, 6 head, 415 sec, 512 bytes/sect x 35885168 sect=
ors
> sd0: sync (50.00ns offset 31), 16-bit (40.000MB/s) transfers, tagged queu=
eing
> sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAN3367MP, 0108> disk fixed
> sd1: 35044 MB, 29950 cyl, 4 head, 599 sec, 512 bytes/sect x 71771688 sect=
ors
> sd1: sync (50.00ns offset 127), 16-bit (40.000MB/s) transfers, tagged que=
ueing
> boot device: wd0
> root on wd0a dumps on wd0b
> root file system type: ffs
> wsdisplay0: screen 1 added (80x25, vt100 emulation)
> wsdisplay0: screen 2 added (80x25, vt100 emulation)
> wsdisplay0: screen 3 added (80x25, vt100 emulation)
> wsdisplay0: screen 4 added (80x25, vt100 emulation)

--=20
|>DUBLET: Digital Unit Built for Logical Exploration and Troubleshooting<|
"CPU speed isn't all it's cracked up to be. It's like a hamster going=20
 3,000 RPM on a treadmill. Fast, yeah, but it's still a hamster."
	--ackthpt (/. user)