I re-built i386-current with sources updated last evening 
(23 January, US/Pacific) and now 'rpc.statd' is spitting out 
the error message

	Jan 24 13:46:51 goldfinger rpc.statd: Failed to contact host ^A^B^C^D^E^F^G: RPC: Unknown host

pretty much constantly.  Running it in the foreground with the
"-d" flag doesn't seem to reveal anything.  The error messages
are filling up my logs, but otherwise it seems to be working fine.

'dmesg' output below.

David S.

--------------------------


NetBSD 1.6ZH (LOCAL-23-01-2004) #0: Sat Jan 24 00:16:12 PST 2004
	dgs@goldfinger:/vol/00/tmp/obj/sys/arch/i386/compile/LOCAL-23-01-2004
total memory = 255 MB
avail memory = 242 MB
BIOS32 rev. 0 found at 0xfb4a0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Duron (686-class), 1204.89 MHz, id 0x671
cpu0: features c3cbfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3cbfbff<PGE,MCA,CMOV,PAT,PSE36,MPC,MMXX,MMX>
cpu0: features c3cbfbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 64 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8366 (Apollo KT266) CPU-PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xd8000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8366 CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX (rev. 0xb2)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
ppb1 at pci0 dev 9 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x03)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled, rd/line, wr/inv ok
fxp0 at pci2 dev 4 function 0: i82558 Ethernet, rev 5
fxp0: interrupting at irq 11
fxp0: Ethernet address 00:03:47:b2:1a:4a
inphy0 at fxp0 phy 1: i82555 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp1 at pci2 dev 5 function 0: i82558 Ethernet, rev 5
fxp1: interrupting at irq 5
fxp1: Ethernet address 00:03:47:b2:1a:4b
inphy1 at fxp1 phy 1: i82555 10/100 media interface, rev. 0
inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc1 at pci0 dev 13 function 0: Adaptec 29160 Ultra160 SCSI adapter
ahc1: interrupting at irq 11
ahc1: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
eap0 at pci0 dev 15 function 0: Ensoniq CT5880 CT5880-C (rev. 0x02)
eap0: interrupting at irq 11
eap0: ac97: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
eap0: ac97: ext id 200<AMAP>
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8233 PCI-ISA Bridge (rev. 0x00)
viaide0 at pci0 dev 17 function 1
viaide0: VIA Technologies VT8233 ATA100 controller
viaide0: bus-master DMA support present
viaide0: primary channel configured to compatibility mode
viaide0: primary channel interrupting at irq 14
atabus0 at viaide0 channel 0
viaide0: secondary channel configured to compatibility mode
viaide0: secondary channel interrupting at irq 15
atabus1 at viaide0 channel 1
isa0 at pcib0
lpt0 at isa0 port 0x378-0x37b irq 7
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
Kernelized RAIDframe activated
IPsec: Initialized Security Association Processing.
scsibus0: waiting 2 seconds for devices to settle...
wd0 at atabus0 drive 0: <WDC WD200BB-00AUA1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19092 MB, 38792 cyl, 16 head, 63 sec, 512 bytes/sect x 39102336 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd1 at atabus0 drive 1: <IC35L080AVVA07-0>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 78533 MB, 159560 cyl, 16 head, 63 sec, 512 bytes/sect x 160836480 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(viaide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
wd1(viaide0:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 1: <DM166D DVD-ROM, , 100B> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd2 at atabus1 drive 0: <SAMSUNG SV2001H>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 19130 MB, 38869 cyl, 16 head, 63 sec, 512 bytes/sect x 39179952 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd2(viaide0:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
cd0(viaide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST318436LW, 0010> disk fixed
sd0: 17522 MB, 14384 cyl, 6 head, 415 sec, 512 bytes/sect x 35885168 sectors
sd0: sync (50.00ns offset 31), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <FUJITSU, MAN3367MP, 0108> disk fixed
sd1: 35044 MB, 29950 cyl, 4 head, 599 sec, 512 bytes/sect x 71771688 sectors
sd1: sync (50.00ns offset 127), 16-bit (40.000MB/s) transfers, tagged queueing
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)