Subject: keyboard unresponsive after boot
To: None <current-users@netbsd.org>
From: Emre Yildirim <ey@ieee.org>
List: current-users
Date: 01/18/2004 14:12:32
Hello,

I just compiled a new kernel today.  Everything boots up fine and I can login as
root.  Then about 5 seconds after I boot and I'm typing something, the keyboard
seems to die completely.  I can type part of what I'm typing but then it just stops.
 The system is still in tact though, because I still get kernel messages and pushing
the power button shows me APM messages.  What could be the problem?  Below is my
dmesg.  The kernel is a slightly modified version of GENERIC_LAPTOP with some
verbose options (I also took out some soundcards, network cards, linux fs support
etc.)

I'm not sure if it has to do with the warning message at the bottom.  Does anyone know?

Thanks


NetBSD 1.6ZH (COGITO) #3: Sun Jan 18 13:36:40 UTC 2004
	root@cogito:/usr/obj/sys/arch/i386/compile/COGITO
total memory = 111 MB
avail memory = 104 MB
BIOS32 rev. 0 found at 0xfd740
PCI BIOS rev. 2.1 found at 0xfd85e
pcibios: config mechanism [1][x], special cycles [x][x], last bus 0
PCI IRQ Routing Table rev. 1.0 found at 0xfdef0, size 240 bytes (13 entries)
PCI Interrupt Router at 000:07:0 (Acer Labs M1543 PCI-ISA Bridge)
------------------------------------------
  device vendor product pin PIRQ IRQ stage
------------------------------------------
000:06:0 0x10b9 0x5451   A  0x07   9  0    already assigned
000:08:0 0x10b9 0x5457   A  0x06   9  0    already assigned
000:09:0 0x104c 0x8021   A  0x01   9  0    already assigned
000:10:0 0x10cf 0x2011   A  0x02   9  0    already assigned
000:11:0 0x10ec 0x8139   A  0x02   9  0    already assigned
000:12:0 0x1002 0x4c59   A  0x00   9  0    already assigned
000:15:0 0x10b9 0x5237   A  0x04   9  0    already assigned
000:18:0 0x1180 0x0475   A  0x02   9  0    fixed up
------------------------------------------
PCI fixup examining 1279:395
PCI fixup examining 1279:396
PCI fixup examining 1279:397
PCI fixup examining 10b9:5451
PCI fixup examining 10b9:1533
PCI fixup examining 10b9:5457
PCI fixup examining 104c:8021
PCI fixup examining 10cf:2011
PCI fixup examining 10ec:8139
PCI fixup examining 1002:4c59
PCI fixup examining 10b9:5237
PCI fixup examining 10b9:5229
PCI fixup examining 10b9:7101
PCI fixup examining 1180:475
PCI bridge 0: primary 0, secondary 1, subordinate 1
PCI fixup examining 10b9:5237
PCI bus #1 is the last bus
[System BIOS Setting]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x1279 0x0395
	10h mem  0xe8100000 0x00100000
		[OK]
000:00:1 0x1279 0x0396
		[OK]
000:00:2 0x1279 0x0397
		[OK]
000:06:0 0x10b9 0x5451
	10h port 0x00001400 0x00000100
	14h mem  0xe8014000 0x00001000
		[OK]
000:07:0 0x10b9 0x1533
		[OK]
000:08:0 0x10b9 0x5457
	10h mem  0xe8015000 0x00001000
	14h port 0x00001800 0x00000100
		[OK]
000:09:0 0x104c 0x8021
	10h mem  0xe8018000 0x00000800
	14h mem  0xe8010000 0x00004000
		[OK]
000:10:0 0x10cf 0x2011
	10h port 0x00001c00 0x00000100
	14h mem  0xe8200000 0x00100000
		[OK]
000:11:0 0x10ec 0x8139
	10h port 0x00002000 0x00000100
	14h mem  0xe8018800 0x00000100
		[OK]
000:12:0 0x1002 0x4c59
	10h mem  0xf0000000 0x08000000
	14h port 0x00002400 0x00000100
	18h mem  0xe8000000 0x00010000
		[OK]
000:15:0 0x10b9 0x5237
	10h mem  0xe8016000 0x00001000
		[OK]
000:16:0 0x10b9 0x5229
	10h port 0x000001f0 0x00000010
	14h port 0x000003f4 0x00000004
	18h port 0x00000170 0x00000010
	1ch port 0x00000374 0x00000004
	20h port 0x00002800 0x00000010
		[OK]
000:17:0 0x10b9 0x7101
		[OK]
000:18:0 0x1180 0x0475
	10h mem  0x00000000 0x00001000
		[NG]
000:20:0 0x10b9 0x5237
	10h mem  0x000e0000 0x00001000
		[OK]
--------------------------[  1 devices bogus]
 Physical memory end: 0x06ffc000
 PCI memory mapped I/O space start: 0x07000000
[PCIBIOS fixup stage]-----------------------
  device vendor product
  register space address    size
--------------------------------------------
000:00:0 0x1279 0x0395
	10h mem  0xe8100000 0x00100000
		[OK]
000:00:1 0x1279 0x0396
		[OK]
000:00:2 0x1279 0x0397
		[OK]
000:06:0 0x10b9 0x5451
	10h port 0x00001400 0x00000100
	14h mem  0xe8014000 0x00001000
		[OK]
000:07:0 0x10b9 0x1533
		[OK]
000:08:0 0x10b9 0x5457
	10h mem  0xe8015000 0x00001000
	14h port 0x00001800 0x00000100
		[OK]
000:09:0 0x104c 0x8021
	10h mem  0xe8018000 0x00000800
	14h mem  0xe8010000 0x00004000
		[OK]
000:10:0 0x10cf 0x2011
	10h port 0x00001c00 0x00000100
	14h mem  0xe8200000 0x00100000
		[OK]
000:11:0 0x10ec 0x8139
	10h port 0x00002000 0x00000100
	14h mem  0xe8018800 0x00000100
		[OK]
000:12:0 0x1002 0x4c59
	10h mem  0xf0000000 0x08000000
	14h port 0x00002400 0x00000100
	18h mem  0xe8000000 0x00010000
		[OK]
000:15:0 0x10b9 0x5237
	10h mem  0xe8016000 0x00001000
		[OK]
000:16:0 0x10b9 0x5229
	10h port 0x000001f0 0x00000010
	14h port 0x000003f4 0x00000004
	18h port 0x00000170 0x00000010
	1ch port 0x00000374 0x00000004
	20h port 0x00002800 0x00000010
		[OK]
000:17:0 0x10b9 0x7101
		[OK]
000:18:0 0x1180 0x0475
	10h mem  0x07000000 0x00001000
		[OK]
000:20:0 0x10b9 0x5237
	10h mem  0x000e0000 0x00001000
		[OK]
--------------------------[  0 devices bogus]
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Transmeta Crusoe (586-class), 727.94 MHz, id 0x543
cpu0: Processor revision 1.4.1.0
cpu0: Code Morphing Software Rev: 4.2.7-8-278
cpu0: 20011004 02:04 official release 4.2.7#7
cpu0: LongRun mode: 2  <733MHz 1300mV 100%>
cpu0: features 84893f<FPU,VME,DE,PSE,TSC,MSR,CX8,SEP>
cpu0: features 84893f<CMOV,PN,MMX>
cpu0: serial number 0000-0543-0000-EEA3-0099-42EC
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20031203
acpi0: X/RSDT: OemId <SONY  ,E0      ,20011206>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
SNY5001 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0303 at acpi0 not configured
SNY9004 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
ACPI Object Type 'Power' (0x0b) at acpi0 not configured
PNP0C0B at acpi0 not configured
acpitz0 at acpi0: ACPI Thermal Zone
acpitz0: unable to get polling interval; using default of 30.0s
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Transmeta Corp LongRun Northbridge (rev. 0x01)
Transmeta Corp SDRAM Controller (RAM memory) at pci0 dev 0 function 1 not configured
Transmeta Corp BIOS Scratchpad (RAM memory) at pci0 dev 0 function 2 not configured
autri0 at pci0 dev 6 function 0: Acer Labs M5451 AC-Link Controller Audio Device
(rev. 0x02)
autri0: interrupting at irq 9
autri0: ac97: Yamaha YMF753-S codec; 18 bit DAC, no 3D stereo
audio0 at autri0: full duplex, mmap, independent
midi0 at autri0: 4DWAVE MIDI UART
pcib0 at pci0 dev 7 function 0
pcib0: Acer Labs M1543 PCI-ISA Bridge (rev. 0x00)
Acer Labs product 0x5457 (modem communications) at pci0 dev 8 function 0 not configured
Texas Instruments TSB43AA22 OHCI IEEE 1394 Host Controller (Firewire serial bus,
interface 0x10, revision 0x02) at pci0 dev 9 function 0 not configured
Citicorp TTI product 0x2011 (miscellaneous multimedia) at pci0 dev 10 function 0 not
configured
rtk0 at pci0 dev 11 function 0: RealTek 8139 10/100BaseTX
rtk0: interrupting at irq 9
rtk0: Ethernet address 08:00:46:46:fd:9d
ukphy0 at rtk0 phy 7: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000000, model 0x0000, rev. 0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vga1 at pci0 dev 12 function 0: ATI Technologies Radeon Mobility M6 LY (AGP) (rev.
0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
wsdisplay0: screen 1-3 added (80x25, vt100 emulation)
ohci0 at pci0 dev 15 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci0: interrupting at irq 9
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
aceride0 at pci0 dev 16 function 0
aceride0: Acer Labs M5229 UDMA IDE Controller (rev. 0xc4)
aceride0: bus-master DMA support present
aceride0: primary channel wired to compatibility mode
aceride0: primary channel interrupting at irq 14
atabus0 at aceride0 channel 0
aceride0: secondary channel wired to compatibility mode
aceride0: secondary channel ignored (disabled)
Acer Labs M7101 Power Management Controller (miscellaneous prehistoric) at pci0 dev
17 function 0 not configured
cbb0 at pci0 dev 18 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x80)
ohci1 at pci0 dev 20 function 0: Acer Labs M5237 USB Host Controller (rev. 0x03)
ohci1: interrupting at irq 9
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Acer Labs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
cbb0: interrupting at irq 9
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 1 device 0
pcmcia0 at cardslot0
Kernelized RAIDframe activated
pcmcia0: CIS version PC Card Standard 5.0
pcmcia0: CIS info: NETGEAR MA401RA Wireless PC, Card, ISL37300P, Eval-RevA
pcmcia0: Manufacturer code 0xb, product 0x7300
pcmcia0: function 0: network adapter, ccr addr 3e0 mask 1
pcmcia0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6,
iospace 0-3f; io16 irqpulse irqlevel
wi0 at pcmcia0 function 0: NETGEAR MA401RA Wireless PC, Card, ISL37300PEval-RevA
wi0: 802.11 address 00:30:ab:20:8b:1c
wi0: using RF:PRISM2.5 MAC:ISL3873B(PCMCIA)
wi0: Intersil Firmware: Primary (1.0.7), Station (1.3.6)
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Sony USB Memory Stick Slot, rev 1.10/1.83, addr 2
umass0: using ATAPI over CBI with CCI
atapibus0 at umass0: 2 targets
sd0 at atapibus0 drive 0: <Sony, MSC-U02, 1.00> disk removable
sd0: drive offline
wd0 at atabus0 drive 0: <IC25N020ATDA04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 19077 MB, 38760 cyl, 16 head, 63 sec, 512 bytes/sect x 39070080 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
wd0(aceride0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data
transfers)
sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd0(umass0:0:0):  Check Condition on CDB: 0x00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

boot device: wd0
root on wd0a dumps on wd0b
WARNING: possible botched superblock upgrade detected
on filesystem previously mounted on /
fs_bsize == fs_maxbsize (0x00002000) but FS_FLAGS_UPDATED is not set
Test your filesystem by running fsck_ffs -n -f on it.
If it reports:
``VALUES IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE''
you should be able to recover with fsck_ffs -b 32 -c 4
See the file src/UPDATING or
http://mail-index.netbsd.org/current-users/2004/01/11/0022.html
for more details
root file system type: ffs