Fellow NetBSD users

I have a Supermicro 6023P-8 board with a Compaq NC6770 GBit SX NIC
(that's a Broadcom 5701) on it.

The card is recognized, but dmesg doesn't say anything about PHY's:

-------------------------------------- 8< --------------------------------------
bge0 at pci3 dev 1 function 0: Broadcom BCM5701 Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5701 B5 (0x0105), Ethernet address 00:08:02:28:12:73
-------------------------------------- 8< --------------------------------------

Are PHY's needed for the card to function.

The NIC is connected to a Cisco 6500 Switch. The LINK LED on the card
is on, but the LED on the Cisco side is not.

I can ping myself but not the gateway on the other side of the link.

I can also provoke a complete hard lock (no ping, no ddb) by doing:

# ifconfig bge0 down

So my questions:

- Are there known problems with the bge(4) driver?
- Shouldn't there show up some phy devices? (all phy's enabled in kernel)

NetBSD is current from yesterday (2004/01/15)

Full dmesg for reference:

-------------------------------------- 8< --------------------------------------
NetBSD 1.6ZH (ITDFW) #1: Thu Jan 15 17:17:04 CET 2004

Welcome to NetBSD!

Terminal type is xterm.                                                                                                                 
itdfw# dmesg
NetBSD 1.6ZH (ITDFW) #1: Thu Jan 15 17:17:04 CET 2004
        root@itdfw.zhwin.ch:/usr/src/NetBSD-current/src/sys/arch/i386/compile/ITDFW
total memory = 511 MB
avail memory = 497 MB
BIOS32 rev. 0 found at 0xfd651
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Pentium 4 (686-class), 2399.47 MHz, id 0xf29
cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
cpu0: I-cache 12K uOp cache 8-way, D-cache 8 KB 64b/line 4-way
cpu0: L2 cache 512 KB 64b/line 8-way
cpu0: ITLB 4K/4M: 64 entries
cpu0: DTLB 4K/4M: 64 entries
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: using Intel ACPI CA subsystem version 20031203
acpi0: X/RSDT: OemId <PTLTD ,  RSDT  ,06040000>, AslId < LTP,00000000>
acpi0: SCI interrupting at int 9
acpi0: fixed-feature power button present
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0200 at acpi0 not configured
npx1 at acpi0 (PNP0C04)
npx1: io 0xf0-0xfe irq 13
npx1: using exception 16
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0100 at acpi0 not configured
pckbc1 at acpi0 (PNP0303): kbd port
pckbc1: io 0x60,0x64 irq 1
pckbc2 at acpi0 (PNP0F13): aux port
pckbc2: irq 12
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
INT0800 at acpi0 not configured
PNP0A05 at acpi0 not configured
fdc1 at acpi0 (PNP0700-1)
fdc1: io 0x3f0-0x3f5,0x3f7 irq 6 drq 2
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel product 0x254c (rev. 0x01)
Intel E7500 MCH DRAM Controller (undefined subclass 0x00, revision 0x01) at pci0 dev 0 function 1 not configured
ppb0 at pci0 dev 2 function 0: Intel E7500 MCH HI_B vppb 1 (rev. 0x01)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci1 dev 28 function 0 not configured
ppb1 at pci1 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x04)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci1 dev 30 function 0 not configured
ppb2 at pci1 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x04)
pci3 at ppb2 bus 3
pci3: i/o space, memory space enabled
bge0 at pci3 dev 1 function 0: Broadcom BCM5701 Gigabit Ethernet
bge0: interrupting at irq 11
bge0: ASIC BCM5701 B5 (0x0105), Ethernet address 00:08:02:28:12:73
wm0 at pci3 dev 2 function 0: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm0: interrupting at irq 11
wm0: 64-bit 133MHz PCIX bus
wm0: 256 word (8 address bits) MicroWire EEPROM
wm0: Ethernet address 00:30:48:29:9e:8e
makphy0 at wm0 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
wm1 at pci3 dev 2 function 1: Intel i82546EB 1000BASE-T Ethernet, rev. 1
wm1: interrupting at irq 11
wm1: 64-bit 133MHz PCIX bus
wm1: 256 word (8 address bits) MicroWire EEPROM
wm1: Ethernet address 00:30:48:29:9e:8f
makphy1 at wm1 phy 1: Marvell 88E1011 Gigabit PHY, rev. 3
makphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
ppb3 at pci0 dev 3 function 0: Intel E7500 MCH HI_C vppb 1 (rev. 0x01)
pci4 at ppb3 bus 4
pci4: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci4 dev 28 function 0 not configured
ppb4 at pci4 dev 29 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x04)
pci5 at ppb4 bus 5
pci5: i/o space, memory space enabled
Intel 82870P2 P64H2 IOxAPIC (interrupt system, interface 0x20, revision 0x04) at pci4 dev 30 function 0 not configured
ppb5 at pci4 dev 31 function 0: Intel 82870P2 P64H2 PCI-to-PCI Bridge (rev. 0x04)
pci6 at ppb5 bus 6
pci6: i/o space, memory space enabled
ahd0 at pci6 dev 2 function 0
ahd0: interrupting at irq 11
ahd0: aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
scsibus0 at ahd0: 16 targets, 8 luns per target
ahd1 at pci6 dev 2 function 1
ahd1: interrupting at irq 11
ahd1: aic7902: Ultra320 Wide Channel B, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
scsibus1 at ahd1: 16 targets, 8 luns per target
Intel 82801CA/CAM USB Controller (USB serial bus, revision 0x02) at pci0 dev 29 function 0 not configured
Intel 82801CA/CAM USB Controller (USB serial bus, revision 0x02) at pci0 dev 29 function 1 not configured
Intel 82801CA/CAM USB Controller (USB serial bus, revision 0x02) at pci0 dev 29 function 2 not configured
ppb6 at pci0 dev 30 function 0: Intel 82801BA Hub-to-PCI Bridge (rev. 0x42)
pci7 at ppb6 bus 7
pci7: i/o space, memory space enabled
vga1 at pci7 dev 1 function 0: ATI Technologies Rage XL (rev. 0x27)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CA LPC Interface (rev. 0x02)
piixide0 at pci0 dev 31 function 1
piixide0: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
piixide0: bus-master DMA support present
piixide0: primary channel wired to compatibility mode
piixide0: primary channel interrupting at irq 14
atabus0 at piixide0 channel 0
piixide0: secondary channel wired to compatibility mode
piixide0: secondary channel interrupting at irq 15
atabus1 at piixide0 channel 1
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
isa0 at pcib0
lm0 at isa0 port 0x290-0x297: W83627HF
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
fd0 at fdc1 drive 0: density unknown
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
scsibus1: waiting 2 seconds for devices to settle...
atapibus0 at atabus1: 2 targets
cd0 at atapibus0 drive 0: <CD-232E, , 1.0A> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
sd0 at scsibus0 target 0 lun 0: <SEAGATE, ST336607LC, 0007> disk fixed
sd0: 35003 MB, 49855 cyl, 2 head, 718 sec, 512 bytes/sect x 71687372 sectors
sd0: sync (6.25ns offset 63), 16-bit (320.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <SEAGATE, ST336607LC, 0007> disk fixed
sd1: 35003 MB, 49855 cyl, 2 head, 718 sec, 512 bytes/sect x 71687372 sectors
sd1: sync (6.25ns offset 63), 16-bit (320.000MB/s) transfers, tagged queueing
ses0 at scsibus0 target 6 lun 0: <SUPER, GEM318, 0> processor fixed
ses0: SAF-TE Compliant Device
ses0: async, 8-bit transfers
boot device: sd0
root on sd0a dumps on sd0b
WARNING: possible botched superblock upgrade detected
on filesystem previously mounted on /
fs_bsize == fs_maxbsize (0x00002000) but FS_FLAGS_UPDATED is not set
Test your filesystem by running fsck_ffs -n -f on it.
If it reports:
``VALUES IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE''
you should be able to recover with fsck_ffs -b 32 -c 4
See the file src/UPDATING or
http://mail-index.netbsd.org/current-users/2004/01/11/0022.html
for more details
root file system type: ffs
WARNING: possible botched superblock upgrade detected
on filesystem previously mounted on /
fs_bsize == fs_maxbsize (0x00002000) but FS_FLAGS_UPDATED is not set
Test your filesystem by running fsck_ffs -n -f on it.
If it reports:
``VALUES IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE''
you should be able to recover with fsck_ffs -b 32 -c 4
See the file src/UPDATING or
http://mail-index.netbsd.org/current-users/2004/01/11/0022.html
for more details
WARNING: possible botched superblock upgrade detected
on filesystem previously mounted on /var
fs_bsize == fs_maxbsize (0x00002000) but FS_FLAGS_UPDATED is not set
Test your filesystem by running fsck_ffs -n -f on it.
If it reports:
``VALUES IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE''
you should be able to recover with fsck_ffs -b 32 -c 4
See the file src/UPDATING or
http://mail-index.netbsd.org/current-users/2004/01/11/0022.html
for more details
WARNING: possible botched superblock upgrade detected
on filesystem previously mounted on /usr
fs_bsize == fs_maxbsize (0x00002000) but FS_FLAGS_UPDATED is not set
Test your filesystem by running fsck_ffs -n -f on it.
If it reports:
``VALUES IN SUPER BLOCK DISAGREE WITH THOSE IN FIRST ALTERNATE''
you should be able to recover with fsck_ffs -b 32 -c 4
See the file src/UPDATING or
http://mail-index.netbsd.org/current-users/2004/01/11/0022.html
for more details
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
-------------------------------------- 8< --------------------------------------

Thanks in advance!

Chris

-- 
----------------------------------------------------------------------
Christoph Kaegi                                           kgc@zhwin.ch
----------------------------------------------------------------------