Could you give me an advice for following question?

My wi interface embedded on Sony Note PC R600 (type 505 in JP/US)
doesn't work on NetBSD-current (1.6T; cvs'ed on last friday).
In fact, this situation has not been changed from NetBSD-current 1.6I.

This is a part of dmesg:
----
wi0 at pci1 dev 11 function 0: Intersil Prism2.5 Wireless Lan
pci_intr_map: no mapping for pin D (line=ff)
wi0: couldn't map interrupt
----

Is this a well-known problem or my configuration mistake?
I'm sorry if this is too novice question.

Following is the whole dmesg:

NetBSD 1.6T (CURRENT) #0: Fri Jun 13 15:12:16 CEST 2003
        root@XXXX :/usr/CURRENT/src/sys/arch/i386/compile/CURRENT
total memory = 510 MB
avail memory = 469 MB
using 6144 buffers containing 26216 KB of memory
BIOS32 rev. 0 found at 0xfd871
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: Intel Mobile Pentium III (686-class), 1193.16 MHz, id 0x6b4
cpu0: features 383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 383f9ff<PGE,MCA,CMOV,PAT,PSE36,MMX>
cpu0: features 383f9ff<FXSR,SSE>
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 4-way
cpu0: L2 cache 512 KB 32b/line 8-way
cpu0: ITLB 32 4 KB entries 4-way, 2 4 MB entries fully associative
cpu0: DTLB 64 4 KB entries 4-way, 8 4 MB entries 4-way
cpu0: 16 page colors
acpi0 at mainbus0
acpi0: X/RSDT: OemId <SONY  ,C1      ,20020708>, AslId <PTL ,00000000>
acpi0: SCI interrupting at int 9
ACPI Object Type 'Processor' (0x0c) at acpi0 not configured
acpi: activated SNY6001
acpilid0 at acpi0 (PNP0C0D): ACPI Lid Switch
acpibut0 at acpi0 (PNP0C0C): ACPI Power Button
PNP0A03 at acpi0 not configured
PNP0C02 at acpi0 not configured
PNP0200 at acpi0 not configured
PNP0C04 at acpi0 not configured
PNP0000 at acpi0 not configured
PNP0B00 at acpi0 not configured
PNP0800 at acpi0 not configured
PNP0100 at acpi0 not configured
PNP0303 at acpi0 not configured
SNY9001 at acpi0 not configured
acpiec0 at acpi0 (PNP0C09): ACPI Embedded Controller
acpiec0: io 0x62,0x66
acpibat0 at acpi0 (PNP0C0A-1): ACPI Battery (Control Method)
acpiacad0 at acpi0 (ACPI0003): ACPI AC Adapter
spic0 at acpi0 (SNY6001): Sony Programmable I/O Controller
spic0: io 0x1080-0x109f irq 11
wsmouse0 at spic0 mux 0
SNY5001 at acpi0 not configured
PNP0501 at acpi0 not configured
PNP0401 at acpi0 not configured
PNP0700 at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
PNP0C0F at acpi0 not configured
acpitz0 at acpi0 (): ACPI Thermal Zone
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Intel 82830MP CPU to I/O Bridge 1 (rev. 0x04)
agp0 at pchb0: detected 892k stolen memory
agp0: aperture size is 128M
: aperture at 0xe8000000, size 0x8000000
vga0 at pci0 dev 2 function 0: Intel 82830MP Integrated Video (rev. 0x04)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
Intel 82830MP Integrated Video (miscellaneous display) at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2: Intel 82801CA/CAM USB Controller (rev. 0x02)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 30 function 0: Intel 82801BAM Hub-to-PCI Bridge (rev. 0x42)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
fwohci0 at pci1 dev 2 function 0: Texas Instruments TSB43AA22/A OHCI IEEE 1394 Host Controller (rev. 0x00)
pci_intr_map: no mapping for pin C (line=ff)
fwohci0: couldn't map interrupt
cbb0 at pci1 dev 5 function 0: Ricoh 5C475 PCI-CardBus bridge (rev. 0x80)
fxp0 at pci1 dev 8 function 0: Intel PRO/100 VE Network Controller, rev 66
fxp0: interrupting at irq 9
fxp0: Ethernet address 08:00:46:6b:29:ea
inphy0 at fxp0 phy 1: i82562ET 10/100 media interface, rev. 0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
wi0 at pci1 dev 11 function 0: Intersil Prism2.5 Wireless Lan
pci_intr_map: no mapping for pin D (line=ff)
wi0: couldn't map interrupt
cbb0: interrupting at irq 3
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 0 device 0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0
pcib0: Intel 82801CAM LPC Interface (rev. 0x02)
pciide0 at pci0 dev 31 function 1: Intel 82801CA IDE Controller (ICH3) (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 38154 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 78140160 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
pciide0: disabling secondary channel (no drives)
Intel 82801CA/CAM SMBus Controller (SMBus serial bus, revision 0x02) at pci0 dev 31 function 3 not configured
auich0 at pci0 dev 31 function 5: i82801CA (ICH3) AC-97 Audio
auich0: can't map codec i/o space
Intel 82801CA/CAM Modem (modem communications, revision 0x02) at pci0 dev 31 function 6 not configured
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse1 at pms0 mux 0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
isapnp0: no ISA Plug 'n Play devices found
WARNING: Callback scheduled before sysmon task queue thread present.
IPsec: Initialized Security Association Processing.
ugen0 at uhub2 port 1
ugen0: Sony USB Memory Stick Slot, rev 1.10/1.09, addr 2
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

Thank you.
--
Hitoshi Asaeda