Last week I got my new toy based on an Nvidia2 board. I
installed the latest snapshot, cvs updated the source,
rebuilt, reinstalled, everything went quite smooth.

The basic things work like a charm (didn't expect something
different). Even more advanced things like the audio and
firewire parts, great job, guys!

What gives me headaches is this Airlancer MC-11 Wlan card,
connected via a TI1225 PCI-Cardbus bridge. The bridge
itself is recognized by the kernel, but insertions and
removals of the Wlan card are not detected. Even after
a fresh boot with the card inserted... no card for the
kernel.
Same result when using a DWL-650 instead of the Airlancer.

Any ideas?

Thank you very much!


My dmesg:

NetBSD 1.6S (HAUKE) #0: Sat May 17 02:28:20 CEST 2003
	root@hauke:/usr/src/sys/arch/i386/compile/HAUKE
total memory = 511 MB
avail memory = 471 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb390
PCI BIOS rev. 2.1 found at 0xfb3c0
PCI IRQ Routing Table rev. 1.0 found at 0xfdec0, size 192 bytes (10 entries)
PCI Interrupt Router at 000:00:0
PCI Exclusive IRQs: 5 10 11
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 2400+ (686-class), 2004.64 MHz, id 0x681
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pnpbios0 at mainbus0: nodes 15, max len 98
pckbc0 at pnpbios0 index 4 (PNP0303): kbd port
npx0 at pnpbios0 index 6 (PNP0C04)
npx0: io f0-ff, irq 13
npx0: using exception 16
pckbc1 at pnpbios0 index 10 (PNP0F13): aux port
com0 at pnpbios0 index 11 (PNP0501)
com0: io 3f8-3ff, irq 4
com0: ns16550a, working fifo
fdc0 at pnpbios0 index 12 (PNP0700)
fdc0: io 3f0-3f5 3f7, irq 6, DMA 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
lpt0 at pnpbios0 index 14 (PNP0401)
lpt0: io 378-37f 778-77f, irq 7, DMA 3
com1 at pnpbios0 index 15 (PNP0501)
com1: io 2f8-2ff, irq 3
com1: ns16550a, working fifo
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: Nvidia Corporation product 0x01e0 (rev. 0xa2)
agp at pchb0 not configured
Nvidia Corporation product 0x01eb (RAM memory, revision 0xa2) at pci0 dev 0 function 1 not configured
Nvidia Corporation product 0x01ee (RAM memory, revision 0xa2) at pci0 dev 0 function 2 not configured
Nvidia Corporation product 0x01ed (RAM memory, revision 0xa2) at pci0 dev 0 function 3 not configured
Nvidia Corporation product 0x01ec (RAM memory, revision 0xa2) at pci0 dev 0 function 4 not configured
Nvidia Corporation product 0x01ef (RAM memory, revision 0xa2) at pci0 dev 0 function 5 not configured
pcib0 at pci0 dev 1 function 0
pcib0: Nvidia Corporation product 0x0060 (rev. 0xa3)
Nvidia Corporation product 0x0064 (SMBus serial bus, revision 0xa2) at pci0 dev 1 function 1 not configured
ohci0 at pci0 dev 2 function 0: Nvidia Corporation product 0x0067 (rev. 0xa3)
ohci0: interrupting at irq 5
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 3 ports with 3 removable, self powered
ohci1 at pci0 dev 2 function 1: Nvidia Corporation product 0x0067 (rev. 0xa3)
ohci1: interrupting at irq 10
ohci1: OHCI version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Nvidia Corporat OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 3 ports with 3 removable, self powered
ehci0 at pci0 dev 2 function 2: Nvidia Corporation product 0x0068 (rev. 0xa3)
ehci0: interrupting at irq 11
ehci0: EHCI version 1.0
ehci0: companion controllers, 4 ports each: ohci0 ohci1
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: Nvidia Corporat EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub2: 6 ports with 6 removable, self powered
Nvidia Corporation product 0x006b (audio multimedia, revision 0xa2) at pci0 dev 5 function 0 not configured
auich0 at pci0 dev 6 function 0: nForce2 MCP-T AC-97 Audio
auich0: interrupting at irq 5
auich0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auich0: variable rate audio, double rate output, S/PDIF, center DAC, surround DAC, LFE DAC
audio0 at auich0: full duplex, mmap, independent
ppb0 at pci0 dev 8 function 0: Nvidia Corporation product 0x006c (rev. 0xa3)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
ppb1 at pci1 dev 6 function 0: Digital Equipment DECchip 21154 PCI-PCI Bridge (rev. 0x02)
pci2 at ppb1 bus 2
pci2: i/o space, memory space enabled
sf0 at pci2 dev 4 function 0: ANA-62011 (rev 0) 10/100 Ethernet, rev. 3
sf0: interrupting at irq 11
sf0: Ethernet address 00:00:d1:d9:a7:e1
sf0: 64-bit PCI slot detected
sqphy0 at sf0 phy 1: Seeq 80220 10/100 media interface, rev. 1
sqphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
sf1 at pci2 dev 5 function 0: ANA-62011 (rev 0) 10/100 Ethernet, rev. 3
sf1: interrupting at irq 10
sf1: Ethernet address 00:00:d1:d9:a7:e2
sf1: 64-bit PCI slot detected
sqphy1 at sf1 phy 1: Seeq 80220 10/100 media interface, rev. 1
sqphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bktr0 at pci1 dev 7 function 0
bktr0: interrupting at irq 10
bktr0: Hauppauge Model 60134 C1 V
bktr0: Detected a MSP3410D-B3 at 0x80
bktr0: Hauppauge WinCast/TV, Philips FR1216 PAL FM tuner, msp3400c stereo.
radio0 at bktr0
cbb0 at pci1 dev 9 function 0: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb1 at pci1 dev 9 function 1: Texas Instruments PCI1225 PCI-CardBus Bridge (rev. 0x01)
cbb0: interrupting at irq 10
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0
pcmcia0 at cardslot0
cbb1: interrupting at irq 10
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 4 device 0
pcmcia1 at cardslot1
pciide0 at pci0 dev 9 function 0: NVIDIA nForce2 IDE Controller (rev. 0xa2)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <ST380020A>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 76319 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 156301488 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <PHILIPS CDRWDVD3210, AH510247018131, P1.0> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 3
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 3 (using DMA data transfers)
fwohci0 at pci0 dev 13 function 0: Nvidia Corporation product 0x006e (rev. 0xa3)
fwohci0: interrupting at irq 5
fwohci0: OHCI 1.1, 00:30:04:00:01:03:50:57, 400Mb/s, 2048 max_rec, 4 ir_ctx, 4 it_ctx
ppb2 at pci0 dev 30 function 0: Nvidia Corporation product 0x01e8 (rev. 0xa2)
pci3 at ppb2 bus 5
pci3: i/o space, memory space enabled
vga0 at pci3 dev 0 function 0: Matrox product 0x2527 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation), using wskbd0
wsmux1: connecting to wsdisplay0
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
apm0 at mainbus0: Power Management spec V1.2
auich0: measured ac97 link rate at 41983 Hz, will use 48000 Hz
fw0 at fwohci0: 00:30:04:00:01:03:50:57:0a:02:ff:ff:f0:01:00:00
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
uhub3 at uhub1 port 3
uhub3: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub3: 4 ports with 4 removable, bus powered
udsbr0 at uhub3 port 3
udsbr0: GemTek Corp USB FM Radio, rev 1.00/4.10, addr 3
radio1 at udsbr0
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

-- 
Tom