tony@libpcap.net wrote:

>Anyone running this board? Im most concerned with the onboard
>Audio/Ethernet (which I do believe is all supported by NetBSD, but just
>want to make sure) and the Promise IDE controllers (RAID too).
>
>Here is the URL to the board:
>http://usa.asus.com/products/mb/socketa/a7v8x/overview.htm
>
>Thanks to anyone who can give me some input.
>
>  
>
Since yesterday night i have the big version (gigabit LAN, ieee1394, 
sata, audio, ...) up and
running NetBSD 1.6R.
status is:
  - bge driver detects Broadcom chip - but MII-PHY is not yet 
recognized. Hopefully
    that can be fixed without too much effort.

other than that everything seems to work with this board, though i don't 
have
any USB2.0 devices and not firewire devices. USB 1 works fine.

Here comes the dmesg output:

NetBSD 1.6R (PIP) #0: Thu May  8 08:58:16 MEST 2003
	kardel@pip:/src/NetBSD/netbsd/sys/arch/i386/compile/PIP
total memory = 1023 MB
avail memory = 946 MB
using 6144 buffers containing 52508 KB of memory
BIOS32 rev. 0 found at 0xf16f0
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD K7 (Athlon) XP (686-class), 2083.24 MHz, id 0x6a0
cpu0: features c3c3fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features c3c3fbff<PGE,MCA,CMOV,PAT,PSE36,MMXX,MMX>
cpu0: features c3c3fbff<FXSR,SSE,3DNOW2,3DNOW>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 512 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8377 Apollo KT400 CPU to PCI Bridge (rev. 0x00)
agp0 at pchb0: aperture at 0xf0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8377 CPU-AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Matrox MGA G400 AGP (rev. 0x82)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
fwohci0 at pci0 dev 7 function 0: VIA Technologies VT3606 OHCI IEEE 1394 Controller (rev. 0x80)
fwohci0: interrupting at irq 10
fwohci0: OHCI 1.0, 00:e0:18:00:00:0e:37:67, 400Mb/s, 2048 max_rec, 4 ir_ctx, 8 it_ctx
pciide0 at pci0 dev 8 function 0: Promise Serial ATA/150 TX2plus Bus Master IDE Accelerator (rev. 0x02)
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
pciide0: primary channel ignored (disabled)
pciide0: secondary channel configured to compatibility mode
pciide0: secondary channel ignored (disabled)
bge0 at pci0 dev 9 function 0: Broadcom BCM5702X Gigabit Ethernet
bge0: interrupting at irq 5
bge0: ASIC BCM5703 A2, Ethernet address 00:e0:18:dd:34:6f
OUI 0x001018 model 0x0016 rev 2 at bge0 phy 1 not configured
bge0: no PHY found!
isic0 at pci0 dev 10 function 0: ELSA QuickStep 1000pro/PCI
isic0: IPAC PSB2115 Version 1.1
isic0: interrupting at irq 11
BRI 0 at isic0
ex0 at pci0 dev 11 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x6c)
ex0: interrupting at irq 9
ex0: MAC address 00:50:da:ee:ca:2e
bmtphy0 at ex0 phy 24: Broadcom 3c905C internal PHY, rev. 4
bmtphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 13 function 0
ahc0: interrupting at irq 11
ahc0: aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
ex1 at pci0 dev 14 function 0: 3Com 3c905B-TX 10/100 Ethernet (rev. 0x30)
ex1: interrupting at irq 10
ex1: MAC address 00:10:5a:d8:53:54
exphy0 at ex1 phy 24: 3Com internal media interface
exphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
uhci0 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci0: interrupting at irq 9
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci1: interrupting at irq 9
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x80)
uhci2: interrupting at irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologies UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 3: VIA Technologies product 0x3104 (rev. 0x82)
ehci0: interrupting at irq 9
ehci0: EHCI version 1.0
ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2
usb3 at ehci0: USB revision 2.0
uhub3 at usb3
uhub3: VIA Technologie EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub3: 6 ports with 6 removable, self powered
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
pciide1 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller
pciide1: bus-master DMA support present
pciide1: primary channel configured to compatibility mode
wd0 at pciide1 channel 0 drive 0: <IBM-DTTA-351010>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9671 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19807200 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd1 at pciide1 channel 0 drive 1: <IBM-DTLA-305040>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 39266 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 80418240 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide1: primary channel interrupting at irq 14
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
pciide1: secondary channel configured to compatibility mode
atapibus0 at pciide1 channel 1: 2 targets
cd0 at atapibus0 drive 1: <YAMAHA  CRW-F1E, , 1.0c> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
wd2 at pciide1 channel 1 drive 0: <IC35L060AVER07-0>
wd2: drive supports 16-sector PIO transfers, LBA addressing
wd2: 58644 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 120103200 sectors
wd2: 32-bit data port
wd2: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide1: secondary channel interrupting at irq 15
wd2(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA data transfers)
cd0(pciide1:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 9
auvia0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auvia0: variable rate audio, double rate output, S/PDIF, center DAC, surround DAC, LFE DAC
audio0 at auvia0: full duplex, mmap, independent
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
IPsec: Initialized Security Association Processing.
fw0 at fwohci0: 00:e0:18:00:00:0e:37:67:0a:02:ff:ff:f0:01:00:00
scsibus0: waiting 2 seconds for devices to settle...
uhub0: port error, restarting port 1
uhub0: port error, restarting port 2
uhub1: port error, restarting port 1
uhub2: port error, restarting port 1
uhub2: port error, restarting port 2
uhub4 at uhub1 port 2
uhub4: Texas Instruments UT-USB41 hub, class 9/0, rev 1.10/1.10, addr 2
uhub4: 4 ports with 4 removable, self powered
cd1 at scsibus0 target 3 lun 0: <YAMAHA, CRW8824S, 1.00> cdrom removable
cd1: sync (50.00ns offset 15), 8-bit (20.000MB/s) transfers
st0 at scsibus0 target 8 lun 0: <SONY, SDT-10000, 0101> tape removable
st0: drive empty
st0: sync (50.00ns offset 8), 16-bit (40.000MB/s) transfers
umodem0 at uhub4 port 1 configuration 2 interface 0
umodem0: Lucent Technologies, Inc. ELSA Modem Board, rev 1.00/1.00, addr 3, iclass 2/2
umodem0: data interface 1, has CM over data, has break
umodem0: status change notification available
ucom0 at umodem0
uhidev0 at uhub4 port 2 configuration 1 interface 0
uhidev0: Microsoft Microsoft IntelliMouse M-. with IntelliEye, rev 1.10/1.01, addr 4, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs