Hi

well it boots fine but when im trying to open any application
i get those haunting messages.

Tnx for quick response!

NetBSD 1.6K (desktop) #0: Sun Dec  1 19:34:24 EET 2002
    root@vokk.purk.ee:/usr/src/sys/arch/i386/compile/desktop
total memory = 511 MB
avail memory = 467 MB
using 6144 buffers containing 26292 KB of memory
BIOS32 rev. 0 found at 0xfb710
mainbus0 (root)
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon XP 1900+ (686-class), 1600.83 MHz
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 383fbff<FXSR,SSE>
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: ITLB 16 4 KB entries fully associative, 8 4 MB entries fully 
associative
cpu0: DTLB 32 4 KB entries fully associative, 8 4 MB entries 4-way
cpu0: 8 page colors
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies product 0x3189 (rev. 0x00)
agp0 at pchb0: aperture at 0xe0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies product 0xb168 (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga1 at pci1 dev 0 function 0: ATI Technologies Rage Fury MAXX AGP 4x 
(TMDS) (rev. 0x00)
wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
bktr0 at pci0 dev 8 function 0
bktr0: interrupting at irq 7
bktr0: Card has no configuration EEPROM. Cannot determine card make.
bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
radio0 at bktr0
Brooktree product 0x0878 (miscellaneous multimedia, revision 0x11) at pci0 
dev 8 function 1 not configured
ahc1 at pci0 dev 9 function 0
ahc1: interrupting at irq 11
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc1: 16 targets, 8 luns per target
Texas Instruments TSB43AA23 OHCI IEEE 1394 Host Controller (Firewire serial 
bus, interface 0x10) at pci0 dev 13 function 0 not configured
uhci0 at pci0 dev 14 function 0: VIA Technologies VT83C572 USB Controller 
(rev. 0x50)
uhci0: interrupting at irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 14 function 1: VIA Technologies VT83C572 USB Controller 
(rev. 0x50)
uhci1: interrupting at irq 7
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
0x51) at pci0 dev 14 function 2 not configured
uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci3: interrupting at irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci4: interrupting at irq 11
usb4 at uhci4: USB revision 1.0
uhub4 at usb4
uhub4: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
0x82) at pci0 dev 16 function 3 not configured
uhci2 at pci0 dev 16 function 0: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci2: interrupting at irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 1: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci3: interrupting at irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
uhci4 at pci0 dev 16 function 2: VIA Technologies VT83C572 USB Controller 
(rev. 0x80)
uhci4: interrupting at irq 11
usb4 at uhci4: USB revision 1.0
uhub4 at usb4
uhub4: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub4: 2 ports with 2 removable, self powered
VIA Technologies product 0x3104 (USB serial bus, interface 0x20, revision 
0x82) at pci0 dev 16 function 3 not configured
pcib0 at pci0 dev 17 function 0
pcib0: VIA Technologies VT8235 (Apollo KT400) PCI-ISA Bridge (rev. 0x00)
pciide0 at pci0 dev 17 function 1: VIA Technologies VT8235 ATA133 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPF3153AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 14659 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 30023280 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA 
data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <LITE-ON LTR-32123S, , XS0X> cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <DVD-ROM DDU1621, MT1329  Firmware, VER S1.> 
cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
data transfers)
cd1(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA 
data transfers)
auvia0 at pci0 dev 17 function 5: VIA VT8235 AC'97 Audio (rev 0x50)
auvia0: interrupting at irq 11
auvia0: Avance Logic ALC650 codec; 20 bit DAC, 18 bit ADC, Realtek 3D
auvia0: variable rate audio, double rate output, S/PDIF, center DAC, 
surround DAC, LFE DAC
audio0 at auvia0: full duplex, mmap, independent
vr0 at pci0 dev 18 function 0: VIA VT6102 (Rhine II) 10/100 Ethernet
vr0: interrupting at irq 10
vr0: Ethernet address: 00:50:8d:fd:34:a0
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface
ukphy0: OUI 0x0002c6, model 0x0032, rev. 5
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pciide1 at pci0 dev 19 function 0: Triones/Highpoint HPT374 IDE Controller
pciide1: bus-master DMA support present
pciide1: primary channel wired to native-PCI mode
pciide1: using irq 11 for native-PCI interrupt
pciide1: secondary channel wired to native-PCI mode
pciide2 at pci0 dev 19 function 1: Triones/Highpoint HPT374 IDE Controller
pciide2: bus-master DMA support present
pciide2: primary channel wired to native-PCI mode
pciide2: using irq 11 for native-PCI interrupt
pciide2: secondary channel wired to native-PCI mode
atapibus1 at pciide2 channel 1: 2 targets
sd0 at atapibus1 drive 1: <IOMEGA  ZIP 100       ATAPI       Flopp, , 12.A> 
disk removable
sd0: drive offline
sd0: 32-bit data port
sd0: drive supports PIO mode 3
sd0(pciide2:1:1): using PIO mode 3
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
Kernelized RAIDframe activated
scsibus0: waiting 2 seconds for devices to settle...
pciide2:1:1: pio setting rejected, falling back to PIO mode 0
sd0(pciide2:1:1): using PIO mode 0
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
pciide0:1:0: lost interrupt
        type: atapi tc_bcount: 0 tc_skip: 0





Tsiteerimine Martin Husemann <martin@duskware.de>:

> > I get a lot of interrupt mesages ... but 1.6 worked fine.
> 
> Well, it would be eventually helpful if you could post
> 
>  (a) the dmesg output when booting current (or, if that does not work, the
>      output from 1.6) and
>  (b) the exact failure message
> 
> Martin
> 




---------------------------------------------
Powered By "NetBSD" http://www.netbsd.org/