--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline


	I've noticed that my cdrom drive has recently started to open and close
the tray, apparently all by itself.  Whenever it does it I have nothing running
that should be doing anything with the cdrom drive. 
Hardware details:
  AMD Athlon on a motherboard with a VIA VT82C686A (Apollo KX133) ATA66 IDE
controller.  It also has a Promise Ultra100 IDE controller with nothing
plugged in to it.  The cdrom drive is the slave drive on the secondary channel.
There is a 30Gb IBM disk as master on the primary channel.

Software details:
	NetBSD 1.6B, built July 2nd.
	dmesg attached.  I get some soft errors from wd0 when booting, but the
drive seems to work fine after that.
	I haven't seen it act like this before this kernel.  I don't remember
what I had installed before.

Has anyone seen a drive act like this?  Any ideas of what could be causing it?

eric

--ReaqsoxgOBHFXBhH
Content-Type: text/plain; charset=us-ascii
Content-Disposition: attachment; filename="dmesg.boot"

NetBSD 1.6B (DIANA) #0: Tue Jul  2 14:13:13 CDT 2002
    root@diana.nimenees.com:/usr/build/DIANA
cpu0: AMD Athlon Model 4 (Thunderbird) (686-class), 857.68 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 256 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX>
cpu0: features 183f9ff<FXSR>
total memory = 127 MB
avail memory = 115 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xf0ef0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x02)
agp0 at pchb0: aperture at 0xe4000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation RIVA TNT2 Model 64 (rev. 0x15)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686A (Apollo KX133) ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <IBM-DTLA-307030>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 29314 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 60036480 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 1: <R/RW 4x4x24, 0000000000000000, Z024> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 4 function 2: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 4 function 3: VIA Technologies VT83C572 USB Controller (rev. 0x10)
uhci1: interrupting at irq 5
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA Technologie UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
pchb1 at pci0 dev 4 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
tlp0 at pci0 dev 10 function 0: ADMtek AN985 Ethernet, pass 1.1
tlp0: interrupting at irq 12
tlp0: Ethernet address 00:30:f1:10:ad:b0
acphy0 at tlp0 phy 1: ACXXX 10/100 media interface, rev. 0
acphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ahc0 at pci0 dev 12 function 0
ahc0: interrupting at irq 11
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
eap0 at pci0 dev 13 function 0: Ensoniq CT5880 CT5880C (rev. 0x02)
eap0: interrupting at irq 5
eap0: SigmaTel STAC9721/23 codec; 18 bit DAC, 18 bit ADC, SigmaTel 3D
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
pciide1 at pci0 dev 17 function 0: Promise Ultra100/ATA Bus Master IDE Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 10 for native-PCI interrupt
pciide1: disabling primary channel (no drives)
pciide1: secondary channel configured to native-PCI mode
pciide1: disabling secondary channel (no drives)
isa0 at pcib0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
apm0 at mainbus0: Power Management spec V1.2
biomask ef65 netmask ff65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
uhub2 at uhub1 port 2
uhub2: ALCOR Generic USB Hub, class 9/0, rev 1.10/1.00, addr 2
uhub2: 4 ports with 4 removable, self powered
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
wd0: transfer error, downgrading to Ultra-DMA mode 2
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd0a: error reading fsbn 96 of 96-127 (wd0 bn 159; cn 0 tn 2 sn 33), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
wd0: transfer error, downgrading to Ultra-DMA mode 1
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 1 (using DMA data transfers)
wd0a: error reading fsbn 2560192 of 2560192-2560223 (wd0 bn 2560255; cn 2539 tn 14 sn 61), retrying
wd0: (aborted command, interface CRC error)
wd0: soft error (corrected)
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)

--ReaqsoxgOBHFXBhH--