Subject: Re: isp driver verbosity
To: Dave McGuire <mcguire@neurotica.com>
From: Matthew Jacob <mjacob@feral.com>
List: current-users
Date: 03/30/2002 18:15:06
On Sat, 30 Mar 2002, Dave McGuire wrote:

> 
>   Hi.  Upon boot, the ahc driver prints messages indicating the transfer
> speed of each target, while the isp driver does not.  I was wondering,
> is that information actually available from an isp card as well, and
> if so, might it be possible for the isp driver to print that
> information in a manner similar to that of the ahc driver?
> 
>   Or...is there any way to ask the isp driver about what speed a
> target is running at?
> 
>   Please CC me on any replies; I'm not on current-users...

Hi- try 'boot -v'- that should get you more than enough verbiage to make one
overflow one's console....

Now you should note that the 'settings' printout is just the maximume
settings. The isp_async announcements should say what we've negotiated to, but
I've caught the ISP1080 lying about this (either that or I didn't quite ask it
correctly).

Also, you should note that in -current, the offset/speed settings are printed
by the midlayer, not the driver. I can't remember what I left 1.5.X at and I
don't have a 1.5 instance handy, but it basically will say the same things.

Why for all this? Just curious? You can always contact the author directly..

-matt

Output:

verbose boot of Alpha 4100... the NVRAM settings show a default max of offset
8, period 0xc for the boot ISP1040... initial settings will be narrow, async
though. The 1080 has offset of 8, Ultra2 period.




Entering netbsd at 0xfffffc0000301410...
[ using 281816 bytes of netbsd ELF symbol table ]
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
    The NetBSD Foundation, Inc.  All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.

NetBSD 1.5ZC (ALPHA-$Revision: 1.157 $) #2: Fri Mar 22 13:33:00 PST 2002
    mjacob@nellie.feral.com:/tstsys/arch/alpha/compile/MJACOB.MP
AlphaServer 4100 5/533 4MB, 531MHz, s/n NI82107P5D
8192 byte page size, 4 processors.
total memory = 512 MB
(2064 KB reserved for PROM, 509 MB used by NetBSD)
avail memory = 470 MB
using 3276 buffers containing 26208 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-2
cpu0: VAX FP support, IEEE FP support, Primary Eligible
cpu0: Architecture extensions: 1<BWX>
cpu1 at mainbus0: ID 1, 21164A-2
cpu1: VAX FP support, IEEE FP support
cpu1: Architecture extensions: 1<BWX>
cpu2 at mainbus0: ID 2, 21164A-2
cpu2: VAX FP support, IEEE FP support
cpu2: Architecture extensions: 1<BWX>
cpu3 at mainbus0: ID 3, 21164A-2
cpu3: VAX FP support, IEEE FP support
cpu3: Architecture extensions: 1<BWX>
mcbus0 at mainbus0: 4MB BCache
mcmem0 at mcbus0 mid 1: Memory
mcpcia0 at mcbus0 mid 5: PCI Bridge
mcpcia0: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci0 at mcpcia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
siop0 at pci0 dev 1 function 0: Symbios Logic 53c810 (fast scsi)
siop0: interrupting at kn300 irq 36
scsibus0 at siop0: 8 targets, 8 luns per target
tlp0 at pci0 dev 2 function 0: DECchip 21140 Ethernet, pass 1.2
tlp0: interrupting at kn300 irq 40
tlp0: DEC DE500-XA, Ethernet address 00:00:f8:01:8b:d7
tlp0: 10baseT, 100baseTX, 100baseTX-FDX, 10baseT-FDX
isp0 at pci0 dev 5 function 0
isp0: Qlogic ISP Driver, NetBSD (pci) Platform Version 2.1 Core Version 2.5
isp0: interrupting at kn300 irq 52
isp0: Differential Mode
isp0: Ultra Mode Capable
isp0: Board Type 1040B, Chip Revision 0x5, loaded F/W Revision 4.66.0
isp0: Last F/W revision was 5.57.1
isp0: 243 max I/O commands supported
isp0: NVRAM CHAN 0 FTHRSH 3 IID 7 RESETD 2 RETRYC 0 RETRYD 0 ASD 0x9
isp0: NVRAM RAAN 0x1 DLAN 0x1 DDMAB 0x1 CDMAB 0x1 SELTIME 250 MQD 256
isp0: NVRAM CHAN 0 TGT 0 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 1 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 2 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 3 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 4 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 5 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 6 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 7 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 8 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 9 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 10 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 11 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 12 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 13 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 14 FLAGS 0xfd00 0x8/0xc
isp0: NVRAM CHAN 0 TGT 15 FLAGS 0xfd00 0x8/0xc
isp0: Initiator ID is 7 on Channel 0
isp0: Initial Settings bus0 tgt0 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt1 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt2 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt3 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt4 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt5 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt6 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt7 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt8 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt9 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt10 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt11 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt12 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt13 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt14 flags 0xc5c0 off 0x0 per 0x0
isp0: Initial Settings bus0 tgt15 flags 0xc5c0 off 0x0 per 0x0
isp0: driver initiated bus reset of bus 0
scsibus1 at isp0: 16 targets, 8 luns per target
mcpcia1 at mcbus0 mid 4: PCI Bridge
mcpcia1: Horse Revision 3, Left Handed Saddle Revision 3, CAP Revision 2
pci1 at mcpcia1 bus 0
pci1: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
pceb0 at pci1 dev 1 function 0: Intel 82375EB/SB PCI-EISA Bridge (PCEB) (rev. 0x15)
isp1 at pci1 dev 3 function 0
isp1: interrupting at kn300 irq 12
isp1: bus 0 is in LVD Mode
isp1: Board Type 1080, Chip Revision 0x1, loaded F/W Revision 8.15.0
isp1: 527 max I/O commands supported
isp1: NVRAM CHAN 0 FTHRSH 4 IID 6 RESETD 2 RETRYC 0 RETRYD 0 ASD 0x9
isp1: NVRAM RAAN 0x1 DLAN 0x1 DDMAB 0x0 CDMAB 0x0 SELTIME 250 MQD 256
isp1: NVRAM CHAN 0 TGT 0 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 1 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 2 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 3 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 4 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 5 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 6 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 7 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 8 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 9 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 10 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 11 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 12 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 13 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 14 FLAGS 0xfd00 0x8/0xa
isp1: NVRAM CHAN 0 TGT 15 FLAGS 0xfd00 0x8/0xa
isp1: Initiator ID is 6 on Channel 0
isp1: Initial Settings bus0 tgt0 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt1 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt2 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt3 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt4 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt5 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt6 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt7 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt8 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt9 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt10 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt11 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt12 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt13 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt14 flags 0xc5c0 off 0x0 per 0x0
isp1: Initial Settings bus0 tgt15 flags 0xc5c0 off 0x0 per 0x0
isp1: Enabled FW features (0xa)
isp1: driver initiated bus reset of bus 0
scsibus2 at isp1: 16 targets, 8 luns per target
isp2 at pci1 dev 5 function 0
isp2: interrupting at kn300 irq 20
isp2: Board Type 2200, Chip Revision 0x5, loaded F/W Revision 2.1.36
isp2: Firmware Attributes = 0x17
isp2: Installed in 64-Bit PCI slot
isp2: 985 max I/O commands supported
isp2: NVRAM Port WWN 0x210000e08b016899
isp2: NVRAM: maxfrmlen 1024 execthrottle 16 fwoptions 0xe
scsibus3 at isp2: 256 targets, 8 luns per target
eisa0 at pceb0
isa0 at pceb0
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com0: console
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
stray kn300 irq 12
stray kn300 irq 52
isp2: LIP Received
isp2: Loop UP
isp2: Port Database Changed
isp2: Port Database Changed
scsibus0: waiting 2 seconds for devices to settle...
siop0: alloc newcdb at PHY addr 0x826e4000
cd0 at scsibus0 target 5 lun 0: <DEC, RRD46   (C) DEC, 1337> SCSI2 5/cdrom removable
cd0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
st0 at scsibus0 target 6 lun 0: <DEC, TLZ09     (C)DEC, 0173> SCSI2 1/sequential removable
st0: density code 36, variable blocks, write-enabled
st0: sync (100.0ns offset 8), 8-bit (10.000MB/s) transfers
scsibus1: waiting 2 seconds for devices to settle...
sd0 at scsibus1 target 0 lun 0: <IBM, DORS32160SUN2.1G, WA7A> SCSI2 0/direct fixed
sd0: 2063 MB, 6703 cyl, 5 head, 126 sec, 512 bytes/sect x 4226725 sectors
isp0: bus 0 set tgt 0 flags 0xfd00 off 0x8 period 0xc
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus1 target 1 lun 0: <SEAGATE, ST34371W SUN4.2G, 7462> SCSI2 0/direct fixed
sd1: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
isp0: bus 0 set tgt 1 flags 0xfd00 off 0x8 period 0xc
sd1: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd2 at scsibus1 target 2 lun 0: <QUANTUM, VK4550J  SUN4.2G, 8600> SCSI2 0/direct fixed
sd2: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
isp0: bus 0 set tgt 2 flags 0xfd00 off 0x8 period 0xc
sd2: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd3 at scsibus1 target 3 lun 0: <CONNER, CFP2107E  2.14GB, 1527> SCSI2 0/direct fixed
sd3: 2048 MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sect x 4194304 sectors
isp0: bus 0 set tgt 3 flags 0xfd00 off 0x8 period 0xc
sd3: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd4 at scsibus1 target 8 lun 0: <CONNER, CFP2107E  2.14GB, 1527> SCSI2 0/direct fixed
sd4: 2048 MB, 3999 cyl, 10 head, 104 sec, 512 bytes/sect x 4194304 sectors
isp0: bus 0 set tgt 8 flags 0xfd00 off 0x8 period 0xc
sd4: sync (100.0ns offset 8), 16-bit (20.000MB/s) transfers, tagged queueing
sd5 at scsibus1 target 9 lun 0: <SEAGATE, ST318203LC, 0002> SCSI2 0/direct fixed
sd5: 17366 MB, 9772 cyl, 12 head, 303 sec, 512 bytes/sect x 35566480 sectors
isp0: bus 0 set tgt 9 flags 0xfd00 off 0x8 period 0xc
sd5: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd6 at scsibus1 target 10 lun 0: <QUANTUM, VK4550J  SUN4.2G, 8600> SCSI2 0/direct fixed
sd6: 4094 MB, 3882 cyl, 16 head, 135 sec, 512 bytes/sect x 8385121 sectors
isp0: bus 0 set tgt 10 flags 0xfd00 off 0x8 period 0xc
sd6: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
ses0 at scsibus1 target 14 lun 0: <SYMBIOS, , 2> SCSI2 3/processor fixed
ses0: SAF-TE Compliant Device
isp0: bus 0 set tgt 14 flags 0xfd00 off 0x8 period 0xc
ses0: async, 8-bit transfers
ses1 at scsibus1 target 15 lun 0: <SYMBIOS, , 2> SCSI2 3/processor fixed
ses1: SAF-TE Compliant Device
isp0: bus 0 set tgt 15 flags 0xfd00 off 0x8 period 0xc
scsibus2: waiting 2 seconds for devices to settle...
scsibus3: waiting 2 seconds for devices to settle...
isp2: Firmware State <Config Wait->Ready>
isp2: Target 126 (Loop 0x7e) Port ID 0xfffffe (role None) Arrived
 Port WWN 0x200600c0dd008073
 Node WWN 0x100000c0dd008073
isp2: Register FC4 types succeeded
isp2: Loop ID 0, AL_PA 0xef, Port ID 0x7006ef, Loop State 0x2, Topology 'FL Port'
isp2: Target 0 (Loop 0x0) Port ID 0x7006ef (role Initiator) Arrived
 Port WWN 0x210000e08b016899
 Node WWN 0x200000e08b016899
isp2:   NL_Port @ 0x7f04bc, Node 0x200000203726216b Port 210000203726216b
isp2:   NL_Port @ 0x7f04c3, Node 0x200000203700c39a Port 210000203700c39a
isp2:   NL_Port @ 0x7f04c5, Node 0x200000203700c3ac Port 210000203700c3ac
isp2:   NL_Port @ 0x7f04c6, Node 0x2000002037083e9b Port 2100002037083e9b
isp2:   NL_Port @ 0x7f04c7, Node 0x2000002037083e13 Port 2100002037083e13
isp2:   NL_Port @ 0x7f04c9, Node 0x200000203700c350 Port 210000203700c350
isp2:   NL_Port @ 0x7f04ca, Node 0x20000020370094e0 Port 21000020370094e0
isp2:   NL_Port @ 0x7f04cb, Node 0x200000203700955f Port 210000203700955f
isp2:   NL_Port @ 0x7f04cc, Node 0x200000203700c3a0 Port 210000203700c3a0
isp2:   NL_Port @ 0x7f04cd, Node 0x20000020370096a1 Port 21000020370096a1
isp2:   NL_Port @ 0x7002e1, Node 0x20000020370f847e Port 21000020370f847e
isp2:   NL_Port @ 0x7002e2, Node 0x20000020370fa077 Port 21000020370fa077
isp2:   NL_Port @ 0x7002e4, Node 0x20000020370f83c0 Port 21000020370f83c0
isp2:   NL_Port @ 0x7002e8, Node 0x20000020370f848e Port 21000020370f848e
isp2:   NL_Port @ 0x7006ef, Node 0x200000e08b016899 Port 210000e08b016899
isp2: Retaining Loop ID 0x7e for Target 126 (Port 0xfffffe)
isp2: Target 129 (Loop 0x82) Port ID 0x7f04bc (role Target) Arrived
 Port WWN 0x210000203726216b
 Node WWN 0x200000203726216b
isp2: Target 130 (Loop 0x83) Port ID 0x7f04c3 (role Target) Arrived
 Port WWN 0x210000203700c39a
 Node WWN 0x200000203700c39a
isp2: Target 131 (Loop 0x84) Port ID 0x7f04c5 (role Target) Arrived
 Port WWN 0x210000203700c3ac
 Node WWN 0x200000203700c3ac
isp2: Target 132 (Loop 0x85) Port ID 0x7f04c6 (role Target) Arrived
 Port WWN 0x2100002037083e9b
 Node WWN 0x2000002037083e9b
isp2: Target 133 (Loop 0x86) Port ID 0x7f04c7 (role Target) Arrived
 Port WWN 0x2100002037083e13
 Node WWN 0x2000002037083e13
isp2: Target 134 (Loop 0x87) Port ID 0x7f04c9 (role Target) Arrived
 Port WWN 0x210000203700c350
 Node WWN 0x200000203700c350
isp2: Target 135 (Loop 0x88) Port ID 0x7f04ca (role Target) Arrived
 Port WWN 0x21000020370094e0
 Node WWN 0x20000020370094e0
isp2: Target 136 (Loop 0x89) Port ID 0x7f04cb (role Target) Arrived
 Port WWN 0x210000203700955f
 Node WWN 0x200000203700955f
isp2: Target 137 (Loop 0x8a) Port ID 0x7f04cc (role Target) Arrived
 Port WWN 0x210000203700c3a0
 Node WWN 0x200000203700c3a0
isp2: Target 138 (Loop 0x8b) Port ID 0x7f04cd (role Target) Arrived
 Port WWN 0x21000020370096a1
 Node WWN 0x20000020370096a1
isp2: Target 139 (Loop 0x8c) Port ID 0x7002e1 (role Target) Arrived
 Port WWN 0x21000020370f847e
 Node WWN 0x20000020370f847e
isp2: Target 140 (Loop 0x8d) Port ID 0x7002e2 (role Target) Arrived
 Port WWN 0x21000020370fa077
 Node WWN 0x20000020370fa077
isp2: Target 141 (Loop 0x8e) Port ID 0x7002e4 (role Target) Arrived
 Port WWN 0x21000020370f83c0
 Node WWN 0x20000020370f83c0
isp2: Target 142 (Loop 0x8f) Port ID 0x7002e8 (role Target) Arrived
 Port WWN 0x21000020370f848e
 Node WWN 0x20000020370f848e
sd7 at scsibus3 target 129 lun 0: <SEAGATE, ST39102FCSUN9.0G, 0728> SCSI2 0/direct fixed
sd7: 8637 MB, 4926 cyl, 27 head, 133 sec, 512 bytes/sect x 17689267 sectors
sd8 at scsibus3 target 130 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd8: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd9 at scsibus3 target 131 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd9: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd10 at scsibus3 target 132 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd10: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd11 at scsibus3 target 133 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd11: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd12 at scsibus3 target 134 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd12: 8748 MB, 6962 cyl, 12 head, 214 sec, 512 bytes/sect x 17917393 sectors
sd13 at scsibus3 target 135 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd13: 8748 MB, 6962 cyl, 12 head, 214 sec, 512 bytes/sect x 17917393 sectors
sd14 at scsibus3 target 136 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd14: 8748 MB, 6962 cyl, 12 head, 214 sec, 512 bytes/sect x 17917393 sectors
sd15 at scsibus3 target 137 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd15: 8748 MB, 6962 cyl, 12 head, 214 sec, 512 bytes/sect x 17917393 sectors
sd16 at scsibus3 target 138 lun 0: <SEAGATE, ST39102F CLAR09, DE0C> SCSI2 0/direct fixed
sd16: 8748 MB, 6962 cyl, 12 head, 214 sec, 512 bytes/sect x 17917393 sectors
sd17 at scsibus3 target 139 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd17: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd18 at scsibus3 target 140 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd18: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd19 at scsibus3 target 141 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd19: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
sd20 at scsibus3 target 142 lun 0: <SEAGATE, ST39102F CLAR09, SG0C> SCSI2 0/direct fixed
sd20: 8625 MB, 6962 cyl, 12 head, 211 sec, 512 bytes/sect x 17664229 sectors
root on sd3a dumps on sd3b
ses1: async, 8-bit transfers
mountroot: trying nfs...
mountroot: trying msdos...
mountroot: trying cd9660...
mountroot: trying ffs...
readclock: 2/3/31/2/9/38=>1017540578 (1016956800)
WARNING: clock gained 6 days -- CHECK AND RESET THE DATE!
root file system type: ffs
init: copying out flags `-s' 3
init: copying out path `/sbin/init' 11