M L Riechers <mlr@rse.com> writes:

   > On Sat, 09 Feb 2002 21:49:55 -0600 seebs@plethora.net (Peter Seebach)
   > I went to the QVS www site, and found a part number UR5FPT-D "USB
   > 5-in-1 w/Built-in 8inch Cable, supports CF/SM/SD/MMC/MicroDrive and
   > works with Windows and Mac, USB 1.1 Compliant".  That seems to be
   > about the only part that fits your description.

   I bought mine from coastmemory.com for $33.

   http://www.coastmemory.com/focus.asp?sku=506001

	   - Nathan



Hello... I got one of those...  yes, they are kind of neat...  The only
problem is that I can get it to work with my Toshiba laptop running
1.5.1_BETA.  What OS's were you all runnning??


When I try I get this on attach, with a CF card present:

umass0 at uhub0 port 1 configuration 1 interface 0
umass0: PQI Travel Flash, rev 1.10/2.05, addr 2
umass0: using SCSI over BBB-P
scsibus0 at umass0: 2 targets, 3 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 1 lun 0: <General, Flash Disk Drive, 2.05> SCSI2 0/direct removable
sd0: could not mode sense (4/5); using fictitious geometry
sd0: 31360 KB, 30 cyl, 64 head, 32 sec, 512 bytes/sect x 62720 sectors
sd1 at scsibus0 target 1 lun 1: <General, Flash Disk Drive, 2.05> SCSI2 0/direct removable
sd1: could not mode sense (4/5); using fictitious geometry
sd1(umass0:1:1):  Check Condition on CDB: 0x25 20 00 00 00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd1(umass0:1:1): could not get size
sd1: 0, 0 cyl, 64 head, 32 sec, 512 bytes/sect x 0 sectors
sd2 at scsibus0 target 1 lun 2: <General, Flash Disk Drive, 2.05> SCSI2 0/direct removable
sd2: could not mode sense (4/5); using fictitious geometry
sd2(umass0:1:2):  Check Condition on CDB: 0x25 40 00 00 00 00 00 00 00 00
    SENSE KEY:  Not Ready
     ASC/ASCQ:  Medium Not Present

sd2(umass0:1:2): could not get size
sd2: 0, 0 cyl, 64 head, 32 sec, 512 bytes/sect x 0 sectors


The lack of sd1 and sd2, I understand.  The mode sense error, however,
seems to be trouble.


When I try to do anything with the CF card, such as mounting it, or
looking at the disklabel, or even a 'od -c /dev/rsd0d', I get something
like the following:

sd0: could not mode sense (4/5); using fictitious geometry
sd0(umass0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code

sd0: dos partition I/O error
sd0(umass0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code

sd0: could not mode sense (4/5); using fictitious geometry
sd0(umass0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code

sd0: dos partition I/O error
sd0(umass0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code


Using a PC card apaptor on the CF card works fine.  I am obviously missing
something...  Thanks.....




-- 
Brad Spencer - brad@anduin.eldar.org
http://anduin.eldar.org  - & -  http://anduin.ipv6.eldar.org [IPv6 only]
[finger brad@anduin.eldar.org for PGP public key]