This is a multi-part message in MIME format.
--------------947CE291C57A52CED3185C28
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit



--------------947CE291C57A52CED3185C28
Content-Type: message/rfc822
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

Message-ID: <3C1C0B44.E54BE985@switchpwr.com>
Date: Sun, 16 Dec 2001 02:47:32 +0000
From: mel kravitz <melk@switchpwr.com>
Organization: switching power inc
MIME-Version: 1.0
To: "Nathan J. Williams" <nathanw@wasabisystems.com>,
 	netbsd-users@netbsd.org, netbsd-current@netbsd.org
Subject: Re:Olypus D-510 
References: <3C1A6FFB.A8E6598C@switchpwr.com> <mtu7krpmope.fsf@contents-vnder-pressvre.mit.edu>
Content-Type: multipart/mixed;
 boundary="------------7BC3038A6CAD63061C546A5C"

This is a multi-part message in MIME format.
--------------7BC3038A6CAD63061C546A5C
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit

>

Nathan Williams wrote

> Try a new kernel with rev 1.173 of dev/scsipi/scsipiconf.c.
>

I updated kernel to 1.5Z 12/15 source, no dice on Olypus D-510, my dmesg for the
machine is shown below, to test the umass driver i hot plugged a USB jazz drive,
i can easily mount it as /dev/sd3c on /mnt.
-Mel



--------------7BC3038A6CAD63061C546A5C
Content-Type: text/plain; charset=us-ascii;
 name="dmesg.3"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg.3"

NetBSD 1.5Z (TODAY) #0: Sat Dec 15 19:25:15 EST 2001
    mel@casey187.doodle.com:/usr/syssrc/sys/arch/alpha/compile/TODAY
Digital Personal WorkStation 433au, 432MHz, s/n 
8192 byte page size, 1 processor.
total memory = 384 MB
(1896 KB reserved for PROM, 382 MB used by NetBSD)
avail memory = 349 MB
using 2458 buffers containing 19664 KB of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), 21164A-0
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config access
sio_intr_setup: 8 level-triggered
pci0 at cia0 bus 0
pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
tlp0 at pci0 dev 3 function 0: DECchip 21143 Ethernet, pass 3.0
tlp0: interrupting at dec 550 irq 0
tlp0: DEC , Ethernet address 00:00:f8:76:5a:9f
nsphy0 at tlp0 phy 5: DP83840 10/100 media interface, rev. 1
nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
tlp0: 10baseT, 10baseT-FDX, 10base2, 10base5
sio0 at pci0 dev 7 function 0: Contaq Microsystems 82C693 PCI-ISA Bridge (rev. 0x00)
pciide0 at pci0 dev 7 function 1: Cypress 82C693 IDE Controller (rev. 0x00)
pciide0: device disabled (at device)
pciide1 at pci0 dev 7 function 2: Cypress 82C693 IDE Controller (rev. 0x00)
pciide1: hardware does not support DMA
pciide1: primary channel wired to compatibility mode
atapibus0 at pciide1 channel 0: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA CD-ROM XM-6302B, , 1017> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide1: secondary channel interrupting at isa irq 15
cd0(pciide1:0:0): using PIO mode 4
ohci0 at pci0 dev 7 function 3: Contaq Microsystems 82C693 PCI-ISA Bridge (rev. 0x00)
ohci0: interrupting at isa irq 10
ohci0: OHCI version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Contaq Microsys OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ppb0 at pci0 dev 20 function 0: Digital Equipment DECchip 21152 PCI-PCI Bridge (rev. 0x02)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled, rd/line, wr/inv ok
isp0 at pci1 dev 4 function 0
isp0: interrupting at dec 550 irq 3
isp0: invalid NVRAM header
scsibus0 at isp0: 16 targets, 8 luns per target
vga0 at pci1 dev 9 function 0: Texas Instruments TVP4020 Permedia 2 (rev. 0x01)
wsdisplay0 at vga0 kbdmux 1: console (80x25, vt100 emulation)
isp1 at pci1 dev 10 function 0
isp1: interrupting at dec 550 irq 20
scsibus1 at isp1: 16 targets, 8 luns per target
isa0 at sio0
cy0 at isa0 iomem 0xd4000-0xd5fff irq 9: Cyclades-Y multiport serial
cy0: 16 channels (ttyCY000..ttyCY015)
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
lpt0 at isa0 port 0x3bc-0x3bf irq 7
ess0 at isa0 port 0x220-0x22f irq 5 drq 1 drq2 5
ess0: ESS Technology ES1887 [version 0x688b]
ess0: audio1 interrupting at irq 5
ess0: audio2 polled
audio0 at ess0: full duplex, mmap, independent
opl0 at ess0: model OPL3
midi at opl0 not configured
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
isabeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
mcclock0 at isa0 port 0x70-0x71: mc146818 or compatible
isapnp0: no ISA Plug 'n Play devices found
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 0 lun 0: <DEC, RZ2CC-KA (C) DEC, 5520> SCSI2 0/direct fixed
sd0: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd0: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
sd1 at scsibus0 target 1 lun 0: <DEC, RZ1CC-BA (C) DEC, 883F> SCSI2 0/direct fixed
sd1: 4091 MB, 3708 cyl, 20 head, 113 sec, 512 bytes/sect x 8380080 sectors
sd1: sync (50.0ns offset 8), 16-bit (40.000MB/s) transfers, tagged queueing
scsibus1: waiting 2 seconds for devices to settle...
sd2 at scsibus1 target 2 lun 0: <iomega, jaz 1GB, H.71> SCSI2 0/direct removable
sd2: drive offline
sd2: async, 8-bit transfers, tagged queueing
root on sd0a dumps on sd0b
root file system type: ffs
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
tlp0: transmit timeout
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: OLYMPUS C-200Z/D-510Z, rev 1.10/1.00, addr 2
umass0: using SCSI over BBB
scsibus2 at umass0: 2 targets, 1 luns per target
scsibus2: waiting 2 seconds for devices to settle...
sd3 at scsibus2 target 1 lun 0: <OLYMPUS, D-510ZOOM, 1.00> SCSI2 0/direct removable
sd3: could not mode sense (4/5); using fictitious geometry
sd3: 8000 KB, 7 cyl, 64 head, 32 sec, 512 bytes/sect x 16000 sectors
sd3: could not mode sense (4/5); using fictitious geometry
sd3(umass0:0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code

sd3: disk label read error
sd3(umass0:0:1:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Command Operation Code
umass0: at uhub0 port 1 (addr 2) disconnected
sd3 detached
scsibus2 detached
umass0 detached
umass0 at uhub0 port 1 configuration 1 interface 0
umass0: Iomega USB Zip 100, rev 1.10/1.00, addr 2
umass0: using SCSI over BBB
scsibus2 at umass0: 2 targets, 1 luns per target
scsibus2: waiting 2 seconds for devices to settle...
sd3 at scsibus2 target 1 lun 0: <IOMEGA, ZIP 100, 10.V> SCSI0 0/direct removable
sd3: 98304 KB, 96 cyl, 64 head, 32 sec, 512 bytes/sect x 196608 sectors
sd3: no disk label

--------------7BC3038A6CAD63061C546A5C--


--------------947CE291C57A52CED3185C28--