I have 2 problems:

1. I use X 4.0 and an aperture driver but after 3 restarts of the X server,
my system crashed.
2. While i move the window, the music is going off.

Thanks for your answers.

Alex.


my dmesg:

NetBSD 1.5Y (DURON1) #0: Sat Oct 20 20:55:33 CEST 2001
    root@netbsd:/usr/src/sys/arch/i386/compile/DURON1
cpu0: AMD Duron (686-class), 908.18 MHz
cpu0: I-cache 64 KB 64b/line 2-way, D-cache 64 KB 64b/line 2-way
cpu0: L2 cache 64 KB 64b/line 16-way
cpu0: features 183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 183f9ff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR>
total memory = 895 MB
avail memory = 828 MB
using 6144 buffers containing 45952 KB of memory
BIOS32 rev. 0 found at 0xf0ef0
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: VIA Technologies VT8363 KT133 System Controller (rev. 0x02)
agp0 at pchb0: aperture at 0xd0000000, size 0x10000000
ppb0 at pci0 dev 1 function 0: VIA Technologies VT8363 KT133 PCI to AGP
Bridge (rev. 0x00)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: Nvidia Corporation GeForce2 MX [NV11] (rev.
0xa1)
wsdisplay0 at vga0 kbdmux -1: console (80x25, vt100 emulation)
pcib0 at pci0 dev 4 function 0
pcib0: VIA Technologies VT82C686A (Apollo KX133) PCI-ISA Bridge (rev. 0x22)
pciide0 at pci0 dev 4 function 1: VIA Technologies VT82C686A (Apollo KX133)
ATA66 controller
pciide0: bus-master DMA support present
pciide0: primary channel configured to compatibility mode
wd0 at pciide0 channel 0 drive 0: <FUJITSU MPD3064AT>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 6187 MB, 13410 cyl, 15 head, 63 sec, 512 bytes/sect x 12672450 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 4 (Ultra/66) (using DMA
data transfers)
pciide0: secondary channel configured to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
sd0 at atapibus0 drive 0: <IOMEGA  ZIP 100       ATAPI       Flopp, , 14.A>
type 0 direct removable
sd0: drive offline
sd0: 32-bit data port
cd0 at atapibus0 drive 1: <TOSHIBA DVD-ROM SD-M1502, 2100005291, 1012> type
5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: secondary channel interrupting at irq 15
sd0(pciide0:1:0): using PIO mode 3
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA
data transfers)
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x10) at
pci0 dev 4 function 2 not configured
VIA Technologies VT83C572 USB Controller (USB serial bus, revision 0x10) at
pci0 dev 4 function 3 not configured
pchb1 at pci0 dev 4 function 4
pchb1: VIA Technologies VT82C686A SMBus Controller (rev. 0x30)
eap0 at pci0 dev 9 function 0: Ensoniq AudioPCI 97 (rev. 0x08)
eap0: interrupting at irq 9
eap0: TriTech unknown codec; no 3D stereo
audio0 at eap0: full duplex, mmap, independent
midi0 at eap0: AudioPCI MIDI UART
de0 at pci0 dev 10 function 0
de0: interrupting at irq 5
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.0
de0: address 00:00:c0:23:e8:e9
pciide1 at pci0 dev 17 function 0: Promise Ultra100/ATA Bus Master IDE
Accelerator (rev. 0x02)
pciide1: bus-master DMA support present
pciide1: primary channel configured to native-PCI mode
pciide1: using irq 10 for native-PCI interrupt
pciide1: disabling primary channel (no drives)
pciide1: secondary channel configured to native-PCI mode
pciide1: disabling secondary channel (no drives)
isa0 at pcib0
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: PC speaker
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
isapnp0: no ISA Plug 'n Play devices found
apm0 at mainbus0: Power Management spec V1.2
biomask eddd netmask edfd ttymask fdff
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
de0: enabling 10baseT port
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0
XFree86 aperture driver version 2.0
Pentium Pro MTRR support enabled

-- 
Free software for a free world.
May the source be with you.

ddeus@gmx.de