Subject: Still errors from `cdplay(1)'
To: None <current-users@netbsd.org>
From: Rafal Boni <rafal@mediaone.net>
List: current-users
Date: 08/20/2001 08:45:25
So I thought Andrew's latest changes to cdplay and the kernel SCSI CD
driver would finally fix my problems with cdplay in -current.  Not so.
I'm still unable to play CD's with NetBSD (NT4 and now Lose2k have no
problems).

When I try and play a CD on my CD reader (the Toshiba) all I get is 
a `cdplay: Invalid argument'; interestingly enough, I can play the
same CD on the Plextor CD-RW just fine, though it's not hooked up to
the audio card's input 8-/

Kernel messages that get spit out when I try and fail on the Toshiba 
and the relevant autoconfig messages are at the end of the message.
I'll file a PR if it hasn't already been filed and I'm not suffering
from some form of UBD.

--rafal

ahc0 at pci0 dev 17 function 0
ahc0: interrupting at irq 10
ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 16/255 SCBs
scsibus0 at ahc0: 16 targets, 8 luns per target
scsibus0: waiting 2 seconds for devices to settle...
sd0 at scsibus0 target 3 lun 0: <IOMEGA, ZIP 100, J.03> SCSI2 0/direct removablesd0: drive offline
sd0: async, 8-bit transfers
cd1 at scsibus0 target 4 lun 0: <PLEXTOR, CD-R   PX-W124TS, 1.07> SCSI2 5/cdrom removable
cd1: sync (50.0ns offset 8), 8-bit (20.000MB/s) transfers
cd0 at scsibus0 target 5 lun 0: <TOSHIBA, CD-ROM XM-6401TA, 1015> SCSI2 5/cdrom removable
cd0: sync (50.0ns offset 16), 8-bit (20.000MB/s) transfers

cd0(ahc0:0:5:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Blank Check
     ASC/ASCQ:  Illegal Mode For This Track

cd0(ahc0:0:5:0):  Check Condition on CDB: 0x08 00 00 00 01 00
    SENSE KEY:  Blank Check
     ASC/ASCQ:  Illegal Mode For This Track

cd0: no disk label
cd0(ahc0:0:5:0):  Check Condition on CDB: 0x15 10 00 00 1c 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List
         SKSV:  Error in Parameters, Offset 0, bit 4

cd0(ahc0:0:5:0):  Check Condition on CDB: 0x15 10 00 00 1c 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List
         SKSV:  Error in Parameters, Offset 0, bit 4

cd0(ahc0:0:5:0):  Check Condition on CDB: 0x15 10 00 00 1c 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List
         SKSV:  Error in Parameters, Offset 0, bit 4

----
Rafal Boni                                                   rafal@mediaone.net