Subject: SCSI failures with -current kernel
To: None <>
From: Dan Debertin <>
List: current-users
Date: 06/23/2001 13:52:32
-current as of yesterday fails to boot from my SCSI drive. It sees it

sd0: 515MB, 2800 cyl, 4 head, 94 sec, 512 bytes/sect x 1056708
sync(100ns offset 15), 8-bit (10 MB/s) transfers, tagged queueing

(This second line does not appear when booting from the older kernel)

Then, shortly after, dies with:

sd0: could not mode sense (4/5); using fictitious geometry
sd0(esp0:0:6:0): check condition on CDB: 0x25 00 00 00 00 00 00 00 00 00

	SENSE KEY: Not Ready
	ASC/ASCQ: Logical Unit Not Ready, Cause Not Reportable
	FRU CODE: 0x15

The same kernel config boots fine from 1.5-release.

Architecture is sparc. Kernel and libc are -current as of yesterday,
remainder of userland is 1.5-release.

Dan Debertin