Subject: Re: CD playing problem with aha driver
To: None <current-users@netbsd.org>
From: Chris Lloyd <strawberry@toth.org.uk>
List: current-users
Date: 06/22/2001 17:49:10
On Mon, Jun 18, 2001 at 20:13:46, Manuel Bouyer wrote:
> Can you recompile a kernel with 'options SCSIVERBOSE' and send the whole
> kernel messages ?

NetBSD 1.5W (BLADE) #10: Fri Jun 22 17:40:39 BST 2001
    chrissy@blade:/usr/src/netbsd/src/sys/arch/i386/compile/BLADE
cpu0: Intel Pentium III (Katmai) (686-class), 501.17 MHz
cpu0: I-cache 16 KB 32b/line 4-way, D-cache 16 KB 32b/line 2-way
cpu0: L2 cache 512 KB 32b/line 4-way
cpu0: features 387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR>
cpu0: features 387f9ff<PGE,MCA,CMOV,FGPAT,PSE36,PN,MMX,FXSR,XMM>
cpu0: serial number 0000-0673-0000-3FF9-C626-3435
total memory = 127 MB
avail memory = 114 MB
using 1658 buffers containing 6632 KB of memory
BIOS32 rev. 0 found at 0xfb310
mainbus0 (root)
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x7190 (rev. 0x03)
ppb0 at pci0 dev 1 function 0: vendor 0x8086 product 0x7191 (rev. 0x03)
pci1 at ppb0 bus 1
pci1: i/o space, memory space enabled
vga0 at pci1 dev 0 function 0: vendor 0x121a product 0x0005 (rev. 0x01)
wsdisplay0 at vga0: console (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0
pcib0: vendor 0x8086 product 0x7110 (rev. 0x02)
pciide0 at pci0 dev 7 function 1: Intel 82371AB IDE controller (PIIX4) (rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 91301U3>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 12407 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 25410672 sectors
wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 4 (Ultra/66)
wd1 at pciide0 channel 0 drive 1: <Maxtor 90840D5>
wd1: drive supports 16-sector PIO transfers, LBA addressing
wd1: 8063 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 16514064 sectors
wd1: 32-bit data port
wd1: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1: 2 targets
cd0 at atapibus0 drive 0: <TOSHIBA DVD-ROM SD-M1212, 6900104038, 1R14> type 5 cdrom removable
cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
cd1 at atapibus0 drive 1: <CD-RW  CRX100E, , 1.0m> type 5 cdrom removable
cd1: 32-bit data port
cd1: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA data transfers)
cd1(pciide0:1:1): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 7 function 2: vendor 0x8086 product 0x7112 (rev. 0x01)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
vendor 0x8086 product 0x7113 (miscellaneous bridge, revision 0x02) at pci0 dev 7 function 3 not configured
vendor 0x12eb product 0x0001 (audio multimedia, revision 0x02) at pci0 dev 9 function 0 not configured
ex0 at pci0 dev 10 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt (rev. 0x74)
ex0: interrupting at irq 5
ex0: MAC address 00:50:da:4c:6d:6c
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x000818, model 0x0017, rev. 6
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vendor 0x127a product 0x1025 (miscellaneous communications, revision 0x01) at pci0 dev 11 function 0 not configured
isa0 at pcib0
aha0 at isa0 port 0x330-0x333 irq 11 drq 7
aha0: model AHA-1542CF, firmware B.0
aha0: unlocking mailbox interface
aha0: async, parity
scsibus0 at aha0: 8 targets, 8 luns per target
com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
com1 at isa0 port 0x2f8-0x2ff irq 3: ns16550a, working fifo
pckbc0 at isa0 port 0x60-0x64
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0
lm0 at isa0 port 0x290-0x297: W83781D
lpt0 at isa0 port 0x378-0x37b irq 7
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
apm0 at mainbus0: Power Management spec V1.2
biomask ef65 netmask ef65 ttymask ffe7
scsibus0: waiting 2 seconds for devices to settle...
cd2 at scsibus0 target 4 lun 0: <MATSHITA, CD-ROM CR-506, 8S05> SCSI2 5/cdrom removable
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
XFree86 aperture driver version 2.0
Pentium Pro MTRR support enabled
IP Filter: v3.4.16 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
cd2(aha0:0:4:0):  Check Condition on CDB: 0x15 10 00 00 1c 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List

cd2(aha0:0:4:0):  Check Condition on CDB: 0x15 10 00 00 1c 00
    SENSE KEY:  Illegal Request
     ASC/ASCQ:  Invalid Field In Parameter List

The Check Condition messages occur after I try and play a CD with cdplay(1).

cdplay> play
cdplay: Invalid argument


 - Chris

--
strawberry@toth.org.uk
http://www.toth.org.uk/~strawberry