I'm trying to use a low-profile Compaq (SFF Deskpro EN P667) as a NAT
router, and I'm getting panicked reboots on the order of one every five to
fifteen minutes of usage.  The chipset is an i815e; using the fxp0 patch
against 1.5 from Giles Lean (see current-users, 12/05/2000) and using 1.5S
sup from March 6 yields the same errors:

Mar 12 10:27:32 marduk /netbsd: fxp0: WARNING: SCB timed out!
Mar 12 10:27:48 marduk last message repeated 68 times
Mar 12 10:33:04 marduk /netbsd: fxp0: WARNING: SCB timed out!
Mar 12 10:33:21 marduk last message repeated 85 times

Sometimes this will recover, mostly does not (it's rebooting now, after
having just finished a reboot not three minutes ago)
While I don't have ddb compiled in just yet, I have been able to catch this
fault:
fatal trace trap in supervisor mode
trap type 5 code 0 elp c01000ff cs 0 eflags 246 cr2 0051000 cpl 0
panic: trap

Dunno if this is x86-specific, or a problem with the fxp driver against the
i815e.  I'll try to catch it through the debugger; I guess I could try a
completely different NIC as a workaround.

My latest dmesg:

NetBSD 1.5S (MARDUK) #0: Tue Mar  6 20:48:14 PST 2001
    bard@marduk:/usr/src/sys/arch/i386/compile/MARDUK
cpu0: Intel Pentium III (Coppermine) (686-class), 664.49 MHz
cpu0: I-cache 16K 32b/line 4-way, D-cache 16K 32b/line 2/4-way
cpu0: L2 cache 256K 32b/line 8-way
cpu0: features 383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
cpu0: features 383fbff<PGE,MCA,CMOV,FGPAT,PSE36,MMX,FXSR,XMM>
total memory = 254 MB
avail memory = 234 MB
using 3283 buffers containing 13132 KB of memory
BIOS32 rev. 0 found at 0xe7300
PCI BIOS rev. 2.1 found at 0xe838d
PCI IRQ Routing Table rev. 1.0 found at 0xf6260, size 208 bytes (11
entries)
PCI Interrupt Router at 000:31:0
mainbus0 (root)
pnpbios0 at mainbus0: nodes 18, max len 250
pnpbios0: node index mismatch (static): requested 0, got 1
pnpbios0: node index mismatch (dynamic): requested 0, got 1
lpt0 at pnpbios0 index 0 (PNP0401)
lpt0: io 378-37f 778-77d, irq 7, dma 3
com0 at pnpbios0 index 3 (PNP0501)
com0: io 3f8-3ff, irq 4
com0: ns16550a, working fifo
com1 at pnpbios0 index 4 (PNP0501)
com1: io 2f8-2ff, irq 3
com1: ns16550a, working fifo
pckbc1 at pnpbios0 index 15 (PNP0303): kbd port
pckbc2 at pnpbios0 index 16 (PNP0F13): aux port
pckbd0 at pckbc1 (kbd slot)
pckbc1: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pci0 at mainbus0 bus 0: configuration mode 1
pci0: i/o space, memory space enabled
pchb0 at pci0 dev 0 function 0
pchb0: vendor 0x8086 product 0x1130 (rev. 0x02)
pchb0: random number generator enabled, 2026Kb/s
vga0 at pci0 dev 2 function 0: vendor 0x8086 product 0x1132 (rev. 0x02)
wsdisplay0 at vga0: console (80x25, vt100 emulation), using wskbd0
ppb0 at pci0 dev 30 function 0: vendor 0x8086 product 0x244e (rev. 0x01)
pci1 at ppb0 bus 2
pci1: i/o space, memory space enabled
ex0 at pci1 dev 4 function 0: 3Com 3c905C-TX 10/100 Ethernet with mngmt
(rev. 0x74)
ex0: interrupting at irq 5
ex0: MAC address 00:01:02:8f:43:0d
ukphy0 at ex0 phy 24: Generic IEEE 802.3u media interface
ukphy0: OUI 0x001018, model 0x0017, rev. 6
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0 at pci1 dev 8 function 0: Intel i82562 Ethernet, rev 1
fxp0: interrupting at irq 10
fxp0: Ethernet address 00:02:a5:17:f4:0e, 10/100 Mb/s
ukphy1 at fxp0 phy 1: Generic IEEE 802.3u media interface
ukphy1: OUI 0x00aa00, model 0x0032, rev. 0
ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcib0 at pci0 dev 31 function 0
pcib0: vendor 0x8086 product 0x2440 (rev. 0x01)
pciide0 at pci0 dev 31 function 1: Intel 82801BA IDE Controller (ICH2)
(rev. 0x01)
pciide0: bus-master DMA support present
pciide0: primary channel wired to compatibility mode
wd0 at pciide0 channel 0 drive 0: <Maxtor 31024H1>
wd0: drive supports 16-sector PIO transfers, LBA addressing
wd0: 9541 MB, 16383 cyl, 16 head, 63 sec, 512 bytes/sect x 19541088 sectors

wd0: 32-bit data port
wd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 5 (Ultra/100)
pciide0: primary channel interrupting at irq 14
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5 (Ultra/100) (using DMA
data transfers)
pciide0: secondary channel wired to compatibility mode
atapibus0 at pciide0 channel 1
cd0 at atapibus0 drive 0: <HITACHI CDR-8130, , 0020> type 5 cdrom removable

cd0: 32-bit data port
cd0: drive supports PIO mode 4, DMA mode 2
pciide0: secondary channel interrupting at irq 15
cd0(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
uhci0 at pci0 dev 31 function 4: vendor 0x8086 product 0x2444 (rev. 0x01)
uhci0: interrupting at irq 5
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: vendor 0x8086 UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
isa0 at pcib0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: PC speaker
spkr0 at pcppi0
sysbeep0 at pcppi0
isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
npx0 at isa0 port 0xf0-0xff: using exception 16
fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB, 80 cyl, 2 head, 18 sec
isapnp0: no ISA Plug 'n Play devices found
biomask fb65 netmask ff65 ttymask ffe7
IPsec: Initialized Security Association Processing.
boot device: wd0
root on wd0a dumps on wd0b
root file system type: ffs
IP Filter: v3.4.9 initialized.  Default = pass all, Logging = enabled
wsdisplay0: screen 1 added (80x25, vt100 emulation)
wsdisplay0: screen 2 added (80x25, vt100 emulation)
wsdisplay0: screen 3 added (80x25, vt100 emulation)
wsdisplay0: screen 4 added (80x25, vt100 emulation)
wsmux1: connecting to wsdisplay0

Thanks much,
David Hopper